Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Neck Plate - Gotoh, Relic, Aged Chrome
A traditional steel neck mounting plate for guitar or bass. Screws included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:
  • Dome Knobs - P-GGT-90
  • Tele Bridge - P-GGT-85
  • String Ferrules - P-GGT-87
  • 6-in-a-line Tuners - P-GGT-81
  • Strap Buttons - P-GGT-86-AC
  • String Trees - P-GGT-92
  • Control Plate - P-GGT-91
Please Log In to view prices
Clip Nut - for ~\frac{8}{32}~" thread, machine screws
Clip nut for 8/32" thread. For use with machine screws
package of 4
Please Log In to view prices
Bridge - Graphtech, ResoMax NV2, Tune-O-Matic Bridge, String Saver Saddles, 4mm Posts
Colors Available:
The ResoMax 4mm bridge is made from Graphtech’s ResoMax alloy. ResoMax is lightweight, high strength, and full of harmonics that will leave your guitar dripping with tone. It comes preloaded with String Saver saddles to reduce string breakage and improve tuning stability. All ResoMax bridges feature Graphtech’s patented magnetic lock to the steel posts that come with it. 4mm posts are used in a lot of American and European-built guitars, and brands such as Gibson, Godin, and Duesenberg. Please see the measurement guide to verify compatibility. The ResoMax NV2 is loaded with Graphtech’s Patented String Saver Saddles. These saddles are impregnated with PTFE and will dramatically reduce string breakage and improve tuning performance.
Please Log In to view prices
Bridge Saddles - Vibramate, Dual Access
Colors Available:

Vibramate V5-TE Slotted Bridge Saddle Set for Telecaster Guitars are designed to work with the Vibramate V5-TE Series Mounting kits and Bigsby vibratos. Each set is custom-slotted utilizing the traditional 3-saddle "ash-tray" configuration and are designed to properly align the strings with the guitar neck of a Telecaster Guitar. The vintage style saddles are made in the USA and feature all Stainless Steel mounting screws and compression springs.

package of 3
Please Log In to view prices
Adapter Kit - Vibramate, V5 Standard Mounting
Vibramate Standard V5 Adapter Mounting Kit, For Bigsby B5, Aluminum Now you can install a Bigsby Vibrato on your guitar without drilling any holes!
Please Log In to view prices
Wood Screw - #3 x 1-3/8”, Phillips, Round Head
Original, made in USA, #3 x 1-3/8” wood screws. These premium screws are nickel plated and are perfect for pickups that are directly mounted to the guitar body such as P-90 and Thunderbird pickups.
Please Log In to view prices
Tuners - Gotoh, SG381, Schaller-style Knob, 6-in-a-line
Colors Available:
These super tuners are recognized as such around the world. The SG381 feature a 16:1 gear ratio and has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing---they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These come with a Schaller-style head and are perfect for your six-in-a-line setup. Mounting hardware included.
package of 6
Please Log In to view prices
Tuner - Hipshot, HB6, USA Ultralite Clover, ⅜" Bass, Reversible, chrome
Any sore shouldered bassist can tell you that fighting "neck dive" from a poorly balanced instrument is akin to slow torture. Our Ultralite® bass tuning machines are designed and manufactured to lighten up the load while improving ruggedness and accuracy. Spend more time on the bass-not at the chiropractor.
Please Log In to view prices
Bridge Saddles - Gotoh, S11, for Guitar, Brass, Chrome Finish
The Gotoh S11 is a high quality brass saddle set. This set offers the tonal advantages of brass for use with tremolo units as well as hardtail bridges. All mounting screws, springs, and height adjustment screws are included. For use with compatible bridges featuring a 52.5mm string spacing.
package of 6
Please Log In to view prices
Tuners - Grover, Rotomatic, 3 per side, 14:1, Keystone knob
Colors Available:
These guitar machines are a triumph in engineering and styling. The housing provides a maximum bearing for worm, gear and string post. Gear ratio is 14:1. Worm and gear are precision-cut for perfect meshing. This eliminates backlash and slippage. Countersunk tension screw permits player to regulate turning tension to any degree. Gear box has a special lubricant for lifetime, trouble-free service. Includes ⅝" washers, bushings and wood screws.
package of 6
Please Log In to view prices
Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
Please Log In to view prices
Washers - Grover, Replacement For Tuner Knobs, Set
Full set of replacement washers for Grover tuners. These are the washers that are between the arm of the tuner and the tuner’s knob. All three washers are used on a single tuner. Includes 6 nylon washers, 6 spring washers, and 6 flat washers.
package of 6
Please Log In to view prices
Knob - Orange brand, top hat, set screw
Original Orange™ amp knob with hex set screw. Fits 6 mm diameter shaft. Black top-hat style knob with with white dot indicator.
Please Log In to view prices
Pickup - Fender®, Original Vintage Telecaster, Bridge
Made with the same materials and specifications of an early 1950s Telecaster pickup, the Original Vintage Telecaster speaks with extremely accurate vintage Tele twang. Made with AlNiCo 3 magnets, enamel coated magnet wire these pickups duplicate the warmth and edge that you'd come to expect from Fender®.
Please Log In to view prices
Vibrato - Bigsby Vibramate Set, for Tele, B5 / V5-TEV Stage II
This is a complete set that includes an original aluminum Bigsby B5 and a matching silver-color Vibramate V5-TEV Stage II for use with Telecaster guitars.
Please Log In to view prices
Saddle - Bigsby, Bridge, New, Polished
Genuine Bigsby® compensated bridge with a 2 13/16” stud spacing. This polished bridge has pre-slotted saddles and is compensated for a plain G string. This bridge was used on Gretsch 6120W models. Please check stud spacing for compatibility.
Please Log In to view prices
Bridge - Bigsby, for Guild Special Archtop
Colors Available:
Genuine Bigby bridge for Guild Special Archtop guitars. This bridge has a 2-1/16" string spacing with a 3” stud spacing.
Please Log In to view prices
Screws - Fender®, Saddle Height Screws
Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.
  • Set of 12 hex set screws
  • For American Vintage Stratocaster and Telecaster guitars
  • Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.
package of 12
Please Log In to view prices
Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
package of 5
Please Log In to view prices
Keeper Bar - 10 Hole, 50mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 50mm spacing. The keeper bar is designed for use with soapbar P-90 pickups. The spare holes are for the pickup mounting screws. This premium keeper bar is made of raw steel.
Please Log In to view prices
Tuner Knob - Kluson, Pearloid Keystone, for tuners
Single ring. Replacement color-correct Keystone (tulip) press-on button for Kluson® tuning machines. Correct for vintage applications. Sold individually. See P-GKLU-SLNDR for double ring.
Please Log In to view prices
Vibrato - Bigsby, B50, for flat-top electric guitars
Colors Available:
Designed for use on thin hollow body and semi-hollowbody guitars Bigsby B50 Specifications
  • Model Name: B-50
  • Series: Licensed Line
  • Manufacturing Method: Die Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 290 grams/10.2 oz.
  • Overall Length: 4 5/16" / 109.5 mm
  • Overall Width: 3 13/16" /96.8 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench
Please Log In to view prices
Pickguard Blanks - 10” x 12”, 0.025” thick, adhesive, acoustic
Colors Available:
Blank thin pickguard material sheets with adhesive backing for acoustic guitars. The pre-applied adhesive makes for a simple installation once cut. All colors feature a gloss surface.
Please Log In to view prices
Tuners - Gotoh, GB707, Compact for Bass, chrome, 4-In-Line
Precision 20:1 gear ratio enclosed Bass Guitar tuners. With a 7/16"-diameter string posts and threaded hex bushings. They require a 9/16"-diameter peghole for installation. Featuring sealed lubricated, cast housings and metal knobs. Mounting screws are included. Mounting hardware included. For 4-string bass. 4 in a line.
package of 4
Please Log In to view prices