Guitar Parts & Pickups

"Gretsch Filter'Tron Electric Guitar Pickups Filter Out Hum, Neon Noises, Crackle and Electrical Disturbance!" The Filter'Tron "Electronic Guitar Head" was introduced in 1957 at the summer NAMM show in Chicago. Filter'Tron pickups feature dual-coils and are designed to Filter out the electronic hum normally associated with single-coil pickups, while adding a warmer tone, and a significant increase in output and sustain.

The 7 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.

If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.

Gotoh 510T Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Hardware included.

A newly fashioned design from Gotoh® with almost no internal friction. Designed to directly retrofit the mounting hole pattern of a vintage tremolo. You can use this bridge to replace a conventional, Hardware included.

A smaller version of the regular size ROTO-GRIP® lockers for the in line and smaller headstocks or for those who prefer a lighter feel.

Original Bigsby flat vintage handle assembly.

The newest addition to the Grover family, these locking machine heads utilize the famous 18:1 Rotomatic® design with a “thumb screw” mechanism which locks the string into place. Insert the string through the post hole, wrap around once, then lock by tightening with the thumb screw. Perfect replacement for the most standard machine heads. Includes all mounting hardware. Includes 3 treble and 3 bass.

A smaller version of the regular size ROTO-GRIP® lockers for the in line and smaller headstocks or for those who prefer a lighter feel.

High quality tremolo featuring height-adjustable saddles that lock to a hardened steel baseplate. Threaded studs and bushings, springs, spring holder, allen wrenches and adjustable-tension arm are included. Looking for a great tremolo system for better tuning stability, string energy transfer and note sustain? Then you have found it right here. Hardware included.

Locking tuners with a chrome, satin finish that provides a sleek, modern look and is less susceptible to fingerprints and blemishes. Package of 6 in a line.

Retrofit your USA '67-'82 Fender P & J Bass for drop tuning! Also retrofits Geddy Lee, reissue '67-'82 Fender. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.

Retrofit your pre-CBS Fender equipped with reverse winding Kluson tuning machines for drop tuning. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.

A tremolo-unit includes the following accessories. Arm, spring, spring-holder, wrench, stud-bolt, screws. U.S.A. threads screws. String spacing:

• 56mm from low E string to high E string
• 11.2mm between each string

SGS is the smaller model of SG510 series and use a 18:1 gear ratio. The SG510 series has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing—they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. Mounting hardware included.

These compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's "Res-O-Lite" machine heads are extremely light weight, only 40 grams each, and made from aluminum alloy to make for a less heavy necked bass. Superior quality and precision made for even the most demanding players out there! Comes in 2+2 configuration and features a 20:1 Gear Ratio. Mounting hardware included.

Retrofits guitars equipped with Schaller® M6 Mini tuning machines. Take your music to a new low with the closed gear Xtender. With the flip of a lever, your low E string can go down to D, C or even B (depending on your string gauge).

Take your music to a new low with the GT1 Grover® Xtender. With the flip of a lever, your low E string can go down to D, C or even B (depending on your string gauge). Retrofits guitars equipped with Grover® Rotomatic tuning machines

The Kluson Contemporary Series 19:1 ratio locking tuning machine uses the more desireable rear knob locking system and is designed for usage on contemporary guitars. This design requires an individual mounting hole location offset at approximately 7 O'clock or 4 O'clock depending on left or right handed application (bass or treble side). Uses the common modern 25/64 in. (10mm) peghole with a hex head type screw-in bushing and single mounting screw. This is a 6 in line set of tuning machines for right handed instruments (non-reverse headstocks) with all mounting hardware included

Vibramate V5-TEV Stage II with Humbucker Ash-Tray bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Now you can install your original model Bigsby Fender F logo vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for the original F logo Bigsby B5 vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The Vibramate V5-TEV Stage II kit includes mounting hardware for the Bigsby original F logo B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles. There is no need for drilling, soldering or removing the neck. The Vibramate V5-TEV Stage II automatically positions the Bigsby Vibrato, neck pickup, and bridge saddles in the proper orientation ensuring a clean, finished appearance with great performance.

Vibramate V5-TEV Stage II with FilterTron - TV Jones Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Vibramate V5-TEV Stage II with Shorty Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

The SGS is the smaller model of SG510 series. These high quality mini-tuners offer solid tuning stability and feature an 18:1 gear ratio. This 6-in-a-line set includes all necessary mounting hardware.