Guitar Parts & Pickups

The PQ-9200-C0 is a great option to replace or upgrade the saddle on your Taylor acoustic as well as many other popular guitars. It is compensated to help improve the playability of your guitar.
Dimensions:

• Length - 2.8 in. (71.12mm)
• Width - 0.22 in. (3.1mm)
• Height - 0.392 in. (9.99mm)

Genuine Fender® set of six plated steel bridge saddles with offset intonation screws, for use on American and American Standard series guitars manufactured from 1986-2007. Intonation springs and mounting hardware included.
Features:

• Set of six plated steel bridge saddles with offset intonation screws
• Intonation springs and mounting hardware included
• For American and American Standard series guitars (1986-2007)

Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 41/64 inches (41.52mm)
• Height #1 (fretboard side) = 13/64 inches (5.06mm)
• Height #2 (headstock side) = 13/64 inches (5mm)
• Thickness at bottom = 9/64 inches (3.46mm)
• Thickness at top = 1/8 inches (3.1mm)

Vibramate V7-335 installs in minutes with no drilling! For arch top guitars with stop tailpiece and Tune-A-Matic bridge. The E-series is for 8.0" guitars. The G-Series is for 8.5" guitars.

Original Fender® jack cup for Tele, nickel, includes mounting hardware. For use on nearly all U.S. and Mexico-made Telecaster guitars manufactured from 1952-present

Original, made in USA, dog ear P-90 frame with a 50mm spacing traditionally used in the bridge position. This premium baseplate is made of raw nickel silver.

Original, made in USA, covers for 1950s, vintage-style, tele neck pickups. These premium tele covers are made of nickel silver and feature the long skirt associated with ‘50s era pickups.

Made in U.S. vintage-spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with raw brass saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP128X. The bridge features the vintage-style retaining wire that secures the raw brass saddles and intonation screws onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:

• 3-ply / 2.5mm thickness
• 8 mounting holes
• Shielding over electronics cavity
• Fits 3/8" bushing pots

Genuine Bigsby® Duane Eddy handle assembly. This unit attaches to vibratos using the included set screw.

Designed for use on arch top electric guitars. Original Kalamazoo Line.

The Gotoh S11 is a high quality brass saddle set. This set offers the tonal advantages of brass for use with tremolo units as well as hardtail bridges. All mounting screws, springs, and height adjustment screws are included. For use with compatible bridges featuring a 52.5mm string spacing.

Any sore shouldered bassist can tell you that fighting "neck dive" from a poorly balanced instrument is akin to slow torture. Our Ultralite® bass tuning machines are designed and manufactured to lighten up the load while improving ruggedness and accuracy. Spend more time on the bass-not at the chiropractor.

Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired. Hardware included.
The bridge features the vintage-style retaining wire that secures the brass saddles and intonation screws onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.

This Kluson® 6-in-line tuning machine set has oval metal (butter bean-shaped) buttons and the improved 15:1 gear ratio for more stable and accurate tuning. The housing and button style are period correct for 1965 - 1969 production dates. These feature the Kluson® Safety Post. This set comes complete with 6 bass side tuners, 8.8mm O.D. vintage bushings with 1/4 inch inner diameter and mounting screws needed for installation.

Genuine Fender American Vintage bass bridge for Jazz bass and Precision bass. Complete assembly with old-style threaded saddles and mounting screws.

Vintage style stamped tuning machine set with solid metal oval buttons. These nickel finished tuners look great on vintage and Fender® style guitars. The gear ratio is 15:1. All mounting hardware is included in this six in a line tuner set.

Blank thin pickguard material sheets with adhesive backing for acoustic guitars. The pre-applied adhesive makes for a simple installation once cut. All colors feature a gloss surface.

Original, made in USA, 10-hole keeper bar for 49.2mm spacing. This P.A.F. correct keeper bar is great for humbucker and P-90 pickups. Made of raw steel.

Original, made in USA, tele baseplate with vintage-correct specifications. This premium baseplate is made of raw steel.

Genuine Bigsby® compensated bridge with a 2 13/16” stud spacing. This polished bridge has pre-slotted saddles and is compensated for a plain G string. This bridge was used on Gretsch 6120W models. Please check stud spacing for compatibility.

This is a complete set that includes an original Bigsby B7 and a matching Vibramate V7-LP for use with most standard carved top Les Paul® guitars with a stop tailpiece and tune-o-matic bridge.

These Gotoh® Vintage Style locking tuners are a retrofit design to a vintage-sized peghole that maintains that classic look with no drilling or modification to your headstock. These are 3 per side individual tuners (not on a plate) just like the originals but with the Gotoh Magnum Lock system built into the string post. This set comes complete with 3 per side tuners. Mounting hardware included.

Direct Drop-in compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's Res-O-Lite machine heads are extremely light weight (59.2 grams each) from aluminum alloy to make for a less neck heavy bass. Features a 26:1 Gear Ratio. 4 In Line config, fits many Standard American and Mexican basses. Also the key post can be removed and replaced on opposing side. Come in 4 on a side. Mounting hardware included. Super lightweight bass machine heads. Bass guitars have weighty machine heads and by their very nature have always suffered from “neck-dive”. With the advent of 5 and 6 string basses, this tendency became still more acute, making long sessions uncomfortable for the musician. The RES-O-LITE series was developed to solve this problem. By chiefly using the special alloy “duralumin”, excellent weight savings are achieved.