Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Nut - Tusq, Pre-slotted, Gibson Pre 2014
The PQ-6010-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made before 2014. It is pre-slotted to make for a quick and easy install.
Dimensions:
  • Length - 1.718 in. (43.64mm)
  • Width - 0.193 in. (4.90mm)
  • Height - 0.371 in. (9.41mm)
  • E to E - 1.397 in. (35.47mm)
  • Radius - 18 in.
Please Log In to view prices
Nut - Fender®, Pre-slotted, Bone, for Tele and Strat
Original Fender pre-slotted bone nut for Teles and Strats.
Please Log In to view prices
Nut - Tusq XL, Pre-slotted, for Jazz Bass
The 1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:
  • Length - 1.554 in. (39.47mm)
  • Width - 0.128 in. (3.25mm)
  • Height - 0.187 in. (4.75mm)
  • E to G - 1.223 in. (31.06mm)
  • Radius - 7.25 in.
Please Log In to view prices
Nut - Original Fender, Pre-Slotted Brass, for Strat / Tele
High-quality solid-brass string nut as used on the Yngwie Malmsteen Stratocaster®, for use with Stratocaster and Telecaster® guitars.
Designed for 9.5"-radius fingerboards and pre-slotted with string location grooves to simplify spacing and positioning during final slot filing.
Features:
  • High-quality solid-brass string nut
  • For 9.5" fingerboard radius
  • Pre-slotted
  • 9.5" (241mm) top and bottom radius
  • 1.620” (41.15mm) wide
Please Log In to view prices
Nut - Tusq XL, Pre-slotted, Gibson Post 2014
The PQL-6011-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made post-2014. It is slightly taller than the P-GNUT-TUSQ-EPS-3XL (pre 2015). When in doubt, use this one, you can always sand the bottom of the nut to adjust lower.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.725 in. (43.83mm)
  • Width - 0.185 in. (4.69mm)
  • Height - 0.405 in. (10.30mm)
  • E to E - 1.408 in. (35.77mm)
Please Log In to view prices
Nut - Bone, for Acoustic, 52.5mm x 10mm x 4.95mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
  • Measures 52.5mm x 10mm x 4.95mm
  • Sold individually
Please Log In to view prices
Nut blanks - Fender®, melamine, set of 2
Set of two Fender® high-quality melamine (simulated bone) string nuts with 9.5" radius, for use with most Fender instruments
package of 2
Please Log In to view prices
Nut - Tusq , Pre-slotted, Acoustic, Martin Style, 1 3/4”
The PQ-M644-00 is the perfect option to replace and upgrade the nut on your Martin style acoustic guitar. It has an angled bottom and comes pre-slotted to make for a quick and easy install. Dimensions:
  • Length - 1.745 in. (44.32mm)
  • Width - 0.224 in. (5.69mm)
  • Height - 0.361 in. (9.17mm)
  • E to E - 1.418 in. (36.02mm)
Please Log In to view prices
Nut - Plastic construction, for Stratocaster
Stratocaster guitar nut - plastic construction
Please Log In to view prices
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
Please Log In to view prices
Nut - Tusq , Pre-shaped Blank, Acoustic, Martin Style
The PQ-M100-00 is a TUSQ nut blank specially designed to be used on Martin style guitars. It has an angled bottom and needs to be slotted. Dimensions:
  • Length - 1.89 in. (48.01mm)
  • Width - 0.226 in. (5.74mm)
  • Height - 0.42 in. (10.67mm)
Please Log In to view prices
Nut - Tusq, ¼” Slab, 63.5mm x 6.35mm x 11.1mm
The PQ-4025-00 is a 1/4" thick block or slab of pure TUSQ. It is 1/4" thick and can be used to make a nut, small saddle or just about anything you can imagine. Dimensions:
  • Length - 2.5 in. (63.5mm)
  • Width - 0.25 in. (6.35mm)
  • Height - 0.437 in. (11.1mm)
Please Log In to view prices
Nut - Brass, for Fender, blank un-slotted
This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.
  • Thickness = 9/64 inches (3.47mm)
  • Flat Bottom Length = 1 11/16 inches (43 mm)
  • Height at ends = 13/64 inches (5.25mm)
  • Height at middle = 15/64 inches (6mm)
Please Log In to view prices
Nut - Tusq, Pre-slotted, Epiphone Pre 2014
The PQ-6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install. Dimensions:
  • Length - 1.730 in. (43.94mm)
  • Width - 0.239 in. (6.08mm)
  • Height - 0.357 in. (9.08mm)
  • E to E - 1.344 in. (34.14mm)
  • Radius - 15 in.

For a Tusq XL version of this nut, see P-GNUT-TUSQ-EPS-5XL.
Please Log In to view prices
Nut - Tusq XL, ¼” Slab, 63.5mm x 6.35mm x 11.1mm
The 4025-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a ¼" thick slab of TUSQ XL. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:
  • Length - 2.5 in. (63.5mm)
  • Width - 0.25 in. (6.35mm)
  • Height - 0.437 in. (11.1mm)
Please Log In to view prices
Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
Please Log In to view prices
Nut - Tusq XL, Pre-slotted, Strat and Tele Style, 7.25" Radius
The Graph Tech PQL-5072-00 is a perfect option for Fender guitars or re-issues from the 1950's-60's or 70's. This nut features a 7.25" radius, works with a curved or flat bottom and is permanently lubricated for great tuning stability. It works in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom. It is pre-slotted to make for a quick and easy install on just about all Fender electric guitars made in the 1950’s, 60’ and 70’s. The 7.25” fingerboard radius originated in the early 1950s and was used for most Fender electric instruments until the 1980s. In the 80's it was changed to a slightly flatter 9.5" radius. TUSQ XL is designed to boost guitar tone and performance. This precision engineered nut is made with a specially formulated material which couples the strings' vibrations to the neck and brings out the hidden harmonics and richness in every note.
Please Log In to view prices
Nut - Tusq XL, Pre-slotted, Strat and Tele Style
The 5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to its ingenious design. The 5000-00 nuts have a 9.5 in. radius This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:
  • Length - 1.687 in. (42.85mm)
  • Width - 0.128 in. (3.25mm)
  • Height - 0.198 in. (5.03mm)
  • E to E - 1.39 in. (35.31mm)
  • Radius - 9.5 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-1.
Please Log In to view prices
Nut - Graphite, for Gibson, slotted
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
Please Log In to view prices
Nut - Tusq XL, Pre-slotted, Epiphone Pre 2014
The 6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:
  • Length - 1.730 in. (43.94mm)
  • Width - 0.243 in. (6.16mm)
  • Height - 0.357 in. (9.08mm)
  • E to E - 1.344 in. (34.14mm)
  • Radius - 15 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-5.
Please Log In to view prices
Nut - Fender®, Pre-slotted, Melamine, for Tele and Strat
Genuine Fender® pre-slotted melamine nut for Telecaster and Stratocaster guitars. This nut has 9 1/2 in. top radius and 7 1/4" bottom radius with an overall length of 1.695 in.
Please Log In to view prices
Nut - Tusq XL, Pre-slotted, for Precision Bass
The 1204-00 is the perfect option to upgrade the nut on your Fender Precision style Bass guitar. It is pre-slotted making installation quick and simple. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:
  • Length - 1.65 in. (41.91mm)
  • Width - 0.125 in. (3.17mm)
  • Height - 0.187 in. (4.75mm)
  • E to G - 1.25 in. (31.75mm)
  • Radius - 7.25 in.
Please Log In to view prices
Nut - Gold Tone, Zero Guide Slotted
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.
Please Log In to view prices
Nut - Tusq, Pre-slotted, Jumbo, Gibson Style
The PQ-6000-00 is a great option to upgrade the nut on your Gibson style electric guitar. It is pre-slotted for a quick and simple install. Dimensions:
  • Length - 1.713 in. (44.07mm)
  • Width - 0.196 in. (4.98mm)
  • Height - 0.329 in. (8.36mm)
  • E to E - 1.398 in. (35.52mm)
Please Log In to view prices