Footswitch Boxes

Replacement Footswitch for Marshall Amps. Two Button. Light-Up LED. ¼" Plug. Generic version of Marshall PED802 (P-H875) Compatible with: Valvestate VS100R and others

Replacement Footswitch for Marshall Amps. Two Button. ¼" Plug. Generic version of Marshall M-PEDL-91004 (P-H871)Compatible with: JCM900 model 4100 and others

Replacement Footswitch for Marshall Amps. One Button. 1/4" Plug. 20 ft. cable. Generic version of Marshall P801 (P-H870) Compatible with: JCM900 model 2100 and others

Order a replacement or add flexibility to your amp! Shielded wire with RCA plugs for vintage-style Fender amps. 12' cable. Replacement for Fender: 0994051000.

Fender® style, 1-button, vintage style with shielded wire and RCA plug (16 foot cable). Multiple color options available.

Replacement Footswitch for Marshall Amps. One Button. Light-Up LED. ¼" Plug. Generic version of Marshall PED801Compatible with: Valvestate model VS65R and othersNote: LED must receive power externally from the amp (i.e. no battery inside).

Restore your contemporary Fender amp’s footswitch functionality with a genuine replacement Fender footswitch.

• Features 1/4" plug and 12' cable
• Used for Mustang™ I, Mustang II, FM Series and Blues Junior™ amplifiers

Replacement Footswitch for Marshall Amps. Three Button. Light-Up LED. 5-Pin DIN Plug. For use with 3-channel Valvestate amps. Generic version of Marshall PED803 (P-H876)Compatible with: Valvestate model VS265R and othersNote: LED must receive power externally from the amp (i.e. no battery inside).

Original Fender Footswitch with vintage RCA connectors. for use with: Early Twin Reverb®, Deluxe Reverb, Pro Reverb, Super Reverb, Bandmaster Reverb, (All vintage amps with dual footswitchable on/off functions requiring RCA connectors). 12' Cable

Footswitch with two buttons labeled "Vib" for Vibrato and "Rev" for Reverb. With 1/4" jack.

Replacement Footswitch for Marshall Amps plus others.

• One button
• ¼” jack
• Cable not included

Two button, channel and reverb. ¼" Plug. Marshall M-PEDL-91004

Replacement Footswitch for Marshall Amps plus others.

• Two button
• ¼” jack
• Cable not included

The Orange FS-1 Footswitch is ruggedly built, simple to use, and compatible for use with the Dual Terror, AD30, Rocker 30, OR50, Rockerverb 50 and 100, Thunderverb 50 and 200, and TH series amplifiers.

Original Fender Footswitch with vintage RCA connectors. for use with: Princeton®, Vibro-Champ, (Original) Fender Reverb. (All vintage amps with a single footswitchable on/off function requiring RCA connectors). 12' Cable.

Genuine Orange single-button mini footswitch. This small footswitch features the classic Orange graphic style and comes with a set of graphic stickers to customize the functionality to match your amp.
Compatible with all Footswitchable Functions:

• Channel Switching: All Orange twin channel valve amplifiers, Crush 20, Crush 20RT, Crush 35RT & Crush Pro amps
• Reverb Engage/Defeat: Rockerverb, Thunderverb and Crush Pro amps
• Attenuator Engage/Defeat: Rockerverb and Dual Dark series.
• Master Volume Lift: OR50
• EQ Lift: Custom Shop 50 – Note: the LED will not illuminate as the Custom Shop uses passive switching circuitry
• Global Boost/Gain Boost: OR100
• Blend Engage/defeat: OB1 Series
• Compression engage/defeat: 4 Stroke series
• And much more!
  

Two button Fender®, ¼" plug. Hot Rod Series (channel & drive).

The Orange FS-2 Footswitch is ruggedly built, simple to use (separate jack inputs for each switch), and compatible for use with the Dual Terror, AD30, Rocker 30, Rockerverb 50 and 100, Thunderverb 50 and 200, and TH series amplifiers.

Connect this 4-button footswitch to your Mustang amplifier (included with the Mustang IV & V, optional for the Mustang III) to enable remote multi-function foot control. The footswitch display and LEDs show you some of the same information as the amplifier screen, so you can, for example, tune your guitar and select presets by watching the footswitch without ever looking at the screen onboard the Mustang! In addition, you can plug both a 4-button and a 2-button footswitch into your Mustang amplifier to expand your remote control options.

• Select Quick Access presets (QA1/QA2/QA3)
• Select presets (up/down/bank)
• Bypass effects
• Activate the tuner
• Used for Mustang™ III and Mustang IV amplifiers and Mustang V head

For use with ValveKing® and Windsor™, 6505® Head and 6505® 212 Combo Features:

• Sturdy molded housing
• Quality metal switch components
• Angled, ergonomic design
• Includes 15' right angle 1/4 cable
• Two button stereo foot switch with LED labeled 1 and 2

One button Fender®, ¼" plug. Commonly used for Blues Junior (Fat).

Restore your contemporary Fender amp’s footswitch functionality with a genuine replacement Fender footswitch. • Features 1/4" plug and 12' cable • Used for FM 65 DSP, Super Champ™ XD, Champion™ 40 and Champion 100 amplifiers

Push-on, push-off switch is compatible with any brand product that uses standard mono 1/4 inch input. Comes with 15 foot cable

Original Marshall Footswitch, Five Button With LED (Clean, Crunch, Lead, Reverb, FX). 6 Pin DIN Plug. For use with TSL Amps.