Enclosures / Chassis

Large 6.02” x 3.27” x 1.98” Hammond 1590P1 enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

Square 3.62” x 3.62” x 1.50” Hammond 1590Y enclosure. This enclosure is a stylish option for builds offering a similar amount of space as a 1950BB enclosure.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

1591T Series enclosure made of clear polycarbonate. The 1591B is a similar size to the 1590B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.

• Ideally suited for mounting printed circuit boards.
• Perfect for applications where parts, sensors or indicators need to be visible.
• Crystal Clear version is almost totally transparent.
• Integral card guides accept 1.5 mm (0.062”) P.C. cards.
• Lap joint construction provides protection against access of dust and splashing water.
• Designed to meet IP54.
• Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
• Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.

1591T Series enclosure made of clear polycarbonate. The 1591C is a similar size to the 1590N1 / 125B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.

• Ideally suited for mounting printed circuit boards.
• Perfect for applications where parts, sensors or indicators need to be visible.
• Crystal Clear version is almost totally transparent.
• Integral card guides accept 1.5 mm (0.062”) P.C. cards.
• Lap joint construction provides protection against access of dust and splashing water.
• Designed to meet IP54.
• Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
• Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.

Round metal handle with 5" mounting centers and 1.5" height. These handles are great for amplifiers, rackmount gear, and guitar pedals. Mounting screws and lock washers are included. Features

• Made of round steel
• 2 Screws - Panhead 10-32 x 1/2"
• 2 Internal Tooth Lockwashers

Round metal handle with 3.5" mounting centers and 1.5" height. These handles are great for amplifiers, rackmount gear, and guitar pedals. Mounting screws and lock washers are included. Features

• Made of round steel
• 2 Screws - Panhead 8-32 x 1/2"
• 2 Internal Tooth Lockwashers

Round metal handle with 2.25" mounting centers and 1" height. These handles are great for amplifiers, rackmount gear, and guitar pedals. Mounting screws and lock washers are included. Features

• Made of round steel
• 2 Screws - Panhead 6-32 x 3/8"
• 2 Internal Tooth Lockwashers

High quality powder coated amp-top enclosures from Hammond’s 1454 Series. These cases are a great choice for amp top effects such as the Dallas Rangemaster. Features

• Made of strong, economical 20 gauge steel.
• Rugged powder coat finish: beige panels with textured black covers.
• Choice of sloping or vertical front panels by reversing the case.
• 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

15° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 2" (1” height at front)
• Top panels are 0.064” thick aluminum
• Powder coated top and bottom
• Wood sides are real walnut - each piece has a unique color & grain.
• Solid oiled walnut sides on a black, ventilated steel base.
• Comes with self adhesive rubber feet and required mounting hardware.

15° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 2" (1” height at front)
• Bottom panels are 0.081” (2 mm) thick aluminum
• Top panels are 0.064” thick aluminum
• Fully Powder Coated
• Comes with self adhesive rubber feet and required mounting hardware.

Pre-drilled three knob pedal enclosure made of pressed steel. This large enclosure is a close match to the original enclosures found on various vintage fuzz effects such as the Vox Tone Bender MKIII, Rotosound Fuzz, and Park Fuzz Sound. It features three holes for potentiometers, two top mounted holes for ⅜” jacks, and a footswitch hole. Comes with 4 rubber feet and a pack of mounting screws(packaged separately) for attaching the bottom plate.

• Footswitch Hole Diameter: 0.492 in. (12.5mm)
• Potentiometer Hole Diameter: 0.294 in. (7.47mm)
• Jack Hole Diameter: 0.447 in. (11.35mm)

Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

30° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 3" (1” height at front)
• Bottom panels are 0.081” (2 mm) thick aluminum
• Top panels are 0.064” thick aluminum
• Fully Powder Coated
• Comes with self adhesive rubber feet and required mounting hardware.

30° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 3" (1” height at front)
• Top panels are 0.064” thick aluminum
• Powder coated top and bottom
• Wood sides are real walnut - each piece has a unique color & grain.
• Solid oiled walnut sides on a black, ventilated steel base.
• Comes with self adhesive rubber feet and required mounting hardware.

Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.

Hammond aluminum chassis box with end panels and curved, riveted sides.

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.

Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-22

Hammond Chassis Box, Steel, 12 in. x 8 in. x 3 in.

• Spot welded heavy duty construction chassis.
• 0.036"" thick.
• Dimensions shown are exterior dimensions.
• Does not include cover. See P-H1431-22 Key

20 gauge bottom chassis plate for P-H1444-22 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

17" wide x 10" long x 4" tall steel chassis with walnut side panels Features:

• Spot welded steel (20 gauge) - heavy duty construction chassis.
• Steel chassis is finished in satin black powder paint
• Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
• Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.

3 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.

• Strong construction, yet light weight using all aluminum components
• Suitable for desk top or rack-mountable applications.
• Knockdown design ships un-assembled for easy handling and shipping protection.
• Strong construction using:
  
  • extruded aluminum side panels 0.125" (3.2 mm) thick
  • extruded aluminum front & rear panels 0.125" (3.2mm) thick
  • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
• Can be used with or without rack mounting brackets (one pair included)
• Front & rear panel are interchangeable.
• Enclosure is finished in rugged, textured, black powder coat.
• Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
• Manufactured in North America.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Six 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.