You are here

Enclosures

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(12 pages)
P-H1590BB2Chassis Box - Hammond, Unpainted Aluminum, 4.7" x 3.7" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

Please Log In to
view prices
Click to read more
P-H1590G2Chassis Box - Hammond, Unpainted Aluminum, 3.9" x 2.0" x 1.2"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

Please Log In to
view prices
Click to read more
P-H1590DDCEChassis Box - Unpainted Aluminum, 7.38" x 4.70" x 1.30"
Diecast Aluminum Chassis Box, 7.4” x 4.7” x 1.3”. Six included machine screws secure lid.
Please Log In to
view prices
Click to read more
P-H1431-10XCover Plate - Hammond, Steel, 8" x 4", 20 Gauge
Colors Available:

Special Order Item

Hammond Mfg 20 gauge steel 8” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Please Log In to
view prices
Click to read more
P-HHW1310XPLCover Plate - Hammond, Aluminum, 11.75" x 8.75"
Colors Available:

Special Order Item

Bottom panel for use with Hammond HWCHAS1310 Natural Aluminum. 11.75" W X 8.75" D


Please Log In to
view prices
Click to read more
P-H1441-38XChassis Box - Hammond, Steel, 17" x 14" x 3"
Colors Available:

Special Order Item

Chassis box 17 inch wide by 14 inch deep by 3 inch tall



  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).


Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3


Please Log In to
view prices
Click to read more
P-H1441-42XChassis Box - Hammond, Steel, 17" x 14" x 5"
Colors Available:

Special Order Item

Cover for chassis box 17 inch wide by 14 inch deep by 5 inch tall.

  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
Please Log In to
view prices
Click to read more
P-H1590VChassis Box - Hammond, Unpainted Aluminum, 4.70" x 4.70" x 3.54"

Special Order Item

  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Please Log In to
view prices
Click to read more
P-H144112BK3CWWChassis Box - Hammond, Steel, 7" x 5" x 2", Walnut Side Panels

Special Order Item

7" wide x 5" long x 2" tall steel chassis and bottom plate with walnut side panels Features:



  • Spot welded steel (20 gauge) - heavy duty construction chassis.
  • Steel chassis is finished in satin black powder paint
  • Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
  • Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.

Please Log In to
view prices
Click to read more
P-H1444-17123Chassis Box - Hammond, 17" x 12" x 3", 1444-17123

Special Order Item

Hammond natural aluminum chassis box. Measures 17" x 12" x 3".


Please Log In to
view prices
Click to read more

Pages

(12 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Enclosures