Enclosures / Chassis

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-26

Measures 6" wide by 6" deep. Rear height is 2.13" and front height is 1.13" with a 15 degree slope
Features:

• 18 gauge steel base for extra strength
• Easy to machine - aluminum top panels are 0.064" thick aluminum.
• Sides include vertical rows of ventilation
• Sold pre-assembled with a two tone grey powder paint finish (base is dark satin gray, slope top is smooth light grey).
• Comes with four self adhesive rubber feet and required hardware.

4.72" x 3.70" x 2.1" (119mm x 94mm x 56mm) diecast aluminum enclosure. Equivalent to the Hammond 1590C enclosure. This enclosure is a taller version of the 1590BB allowing for more vertical space for larger projects.

Hammond Mfg 20 gauge steel 12” x 10” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

Hammond Mfg 20 gauge steel 16” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

20 gauge bottom chassis plate for P-H1444-1273 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

1 rack unit tall, extruded aluminum, 8.5" enclosure for rack-mount or desktop use.

• Strong construction, yet light weight using all aluminum components
• Suitable for desk top or rack-mountable applications.
• Knockdown design ships un-assembled for easy handling and shipping protection.
• Strong construction using:
  
  • extruded aluminum side panels 0.125" (3.2 mm) thick
  • extruded aluminum front & rear panels 0.125" (3.2mm) thick
  • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
• Can be used with or without rack mounting brackets (one pair included)
• Front & rear panel are interchangeable.
• Enclosure is finished in rugged, textured, black powder coat.
• Includes top, bottom, sides, self adhesive rubber feet, and all assembly hardware
• Manufactured in North America.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Fender® style Tweed Champ™(5F1) chassis.

• Chrome plated steel, .06" thick.
• Screened white lettering
• 8-Pin (Octal) socket holes: 2
• 9-Pin (miniature) socket holes: 1
• Chassis Dimensions: 8-3/4" x 4-1/8" x 2 5/8"

Square 3.62” x 3.62” x 1.50” Hammond 1590Y enclosure. This enclosure is a stylish option for builds offering a similar amount of space as a 1950BB enclosure.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

8 inch wide by 4 inch deep by 1 inch tall

• Spot welded steel - heavy duty construction chassis.
• Finished in ASA 61 smooth grey
• Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-9 P-H1431-9 Steel Black Satin P-H1441-9BK3 P-H1431-9BK3

YY enclosure finished in a hammered bronze powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features

• Vintage style slant
• Hammered bronze powdercoat
• Flat top-section for mounting controls
• Recessed lid
• Thick diecast construction

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-8 or P-H1431-8BK3

Walnut chassis with black aluminum top panel, measures 17 inches by 10 inches by 3 inches Features:

• Heavy duty construction walnut chassis
• Top panel available in satin black powder paint finish.
• Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing & dovetail construction methods. Designed to handle heavy components.
• Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick.

5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x 1/2" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Add 0.16" to enclosure depth for lid.

Hammond Mfg 20 gauge steel 6” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

Chassis box 17 inch wide by 14 inch deep by 3 inch tall

• Spot welded steel - heavy duty construction chassis.
• Finished in ASA 61 smooth grey or satin black powder paint
• Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3

• Strong construction, yet light weight using all aluminum components
• Suitable for desk top or rack-mountable applications.
• Knockdown design ships un-assembled for easy handling and shipping protection.
• Strong construction using:
  
  • extruded aluminum side panels 0.125" (3.2 mm) thick
  • extruded aluminum front & rear panels 0.125" (3.2mm) thick
  • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
• Can be used with or without rack mounting brackets (one pair included)
• Front & rear panel are interchangeable.
• Enclosure is finished in rugged, textured, black powder coat.
• Includes top, bottom, sides, self adhesive rubber feet, and all assembly hardware
• Manufactured in North America.

4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.

Marshall™ style 18 Watt TMB chassis w/ front and back plates

• Brushed aluminum chassis, .07" thick.
• Gold “plexi” style front and back plates
• 9-Pin (miniature) socket holes: 6
• Capacitor mounting holes:1
• Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:

• Power transformer mounting centers: 3-1/8” x 2-1/2”
• Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
• Can cap mounting centers : 2”
• Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:

• Noval socket with shield base: P-ST9-700
• Noval socket (no shield): P-ST9-600

Eddystone 27134PSLA enclosure with similar dimensions to the Hammond 1590B enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590B style builds.

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Aluminum alloy to BS1490, LM2M - supplied in natural finish.
• Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
• Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
• Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
• Countersunk lid holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.

Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures finished in a hammered bronze powdercoat. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.