You are here

Enclosures

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(12 pages)
P-H1590EChassis Box - Hammond, Unpainted Aluminum, 7.38" x 4.70" x 3.07"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
Please Log In to
view prices
Click to read more
P-H1590FChassis Box - Hammond, Unpainted Aluminum, 7.38" x 7.38" x 2.48"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
Please Log In to
view prices
Click to read more
P-H1590N1Chassis Box - Hammond, Unpainted Aluminum, 4.77" x 2.6" x 1.39"
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Please Log In to
view prices
Click to read more
P-H1441-8XChassis Box - Hammond, Steel, 6" x 4" x 2"
Colors Available:

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-8 or P-H1431-8BK3


Please Log In to
view prices
Click to read more
P-HWCHAS1310XChassis Box - Hammond, Walnut / Aluminum, 13" x 10" x 3"
Colors Available:

Special Order Item

Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".



  • Heavy duty construction walnut chassis.
  • Top panel in natural aluminium.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.

Please Log In to
view prices
Click to read more
P-H1431-20XCover Plate - Hammond, Steel, 17" x 4", 20 Gauge
Colors Available:

Special Order Item

20 gauge. Cover for chassis box 17 inch wide by 4 inch deep by 3 inch tall.



  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).


Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3


Please Log In to
view prices
Click to read more
P-H1431-8XCover Plate - Hammond, Steel, 6" x 4", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 6” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Please Log In to
view prices
Click to read more
P-H1590STPCChassis Box - Hammond, Aluminum, 5.23" x 5.23" x 1.38", Octagon
Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23"x5.23"x1.38"
Please Log In to
view prices
Click to read more
P-H1431-18XCover Plate - Hammond, Steel, 13.5" x 5", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 13.5” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8"" holes to allow installation of optional bottom plates).
Please Log In to
view prices
Click to read more
P-H1451-30XChassis Cage - Hammond, Steel, 17" x 10" x 5.2"
Colors Available:

Special Order Item

  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.


For satin black version, see P-H1451-30BK3


Please Log In to
view prices
Click to read more

Pages

(12 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Enclosures