Enclosures / Chassis

Chassis Box - Hammond, 1590E, Diecast, 7.40" x 4.72" x 3.07"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
Please Log In to view prices
Chassis Box - Hammond, Aluminum, 12" x 10" x 2"
Hammond Chassis Box, Aluminum, 12 in. x 10 in. x 2 in. Spot-welded heavy duty construction, natural finish. See P-H1434-29 for cover.
Please Log In to view prices
Chassis - Marshall Style 18 Watt Tremolo
Marshall™ style 18 Watt Tremolo chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 9-Pin (miniature) socket holes: 6
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-1/8” x 2-1/2”
  • Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
  • Can cap mounting centers : 2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
Please Log In to view prices
Chassis Box - Hammond, 27969PSLA, Eddystone 1590A, Diecast, 3.6” x 1.5” x 1.2”
Eddystone 27969PSLA enclosure with similar dimensions to the Hammond 1590A enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590A style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Please Log In to view prices
Cover Plate - Hammond, Aluminum, 8" x 6"
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
Please Log In to view prices
Chassis Box - Hammond, 27134PSLA, Eddystone 1590B, Diecast, 4.4” x 2.4” x 1.2”
Eddystone 27134PSLA enclosure with similar dimensions to the Hammond 1590B enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590B style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Please Log In to view prices
Chassis Box - Hammond, 29830PSLA, Eddystone 1590BB, Diecast, 4.7” x 3.7” x 1.3”
Eddystone 29830PSLA enclosure with similar dimensions to the Hammond 1590BB enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590BB style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Please Log In to view prices
Cover Plate - Hammond, Aluminum, 11.75" x 8.75"
Colors Available:
Special Order Item
Bottom panel for use with Hammond HWCHAS1310 Natural Aluminum. 11.75" W X 8.75" D
Please Log In to view prices
Chassis Box - Hammond, Walnut / Aluminum, 13" x 10" x 3"
Colors Available:
Special Order Item
Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".
  • Heavy duty construction walnut chassis.
  • Top panel in natural aluminium.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.
Please Log In to view prices
Chassis Box - Hammond, Aluminum, 12" x 10" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Spot-welded heavy duty construction. See P-H1434-29 for cover
Please Log In to view prices
Chassis Box - Hammond, 17" x 12" x 3", 1444-17123
Special Order Item
Hammond natural aluminum chassis box. Measures 17" x 12" x 3".
Please Log In to view prices
Chassis Cover - Hammond, Aluminum, 17" x 12"
Special Order Item
Hammond aluminum, heavy-duty chassis cover. Measures 17 in. by 12 in.
Please Log In to view prices
Chassis Box - Hammond, Aluminum, 17" x 4" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions. Features:
  • Spot-welded heavy duty construction
  • Natural finish

Does not include cover.
Please Log In to view prices
Chassis box - Hammond, Aluminum, 8.66" x 4.06" x 1.2"
Special Order Item
Hammond aluminum chassis box with end panels and curved, riveted sides.
Please Log In to view prices
Chassis Box - Hammond, 1590V, Diecast, 4.70" x 4.70" x 3.54"
Special Order Item
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Please Log In to view prices
Cover Plate - Hammond, 20 gauge steel, 9" x 7"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
Please Log In to view prices
Chassis Box - Hammond, Aluminum, 12" x 7" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Spot-welded heavy duty construction. See P-H1434-127 for cover.
Please Log In to view prices
Chassis Box - Hammond, Aluminum, 12" x 8" x 2.5"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
Please Log In to view prices
Chassis Box - Hammond, Aluminum, 14" x 10" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Please Log In to view prices
Chassis Box - Hammond, Aluminum, 10" x 6" x 1"
Special Order Item
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Please Log In to view prices
Chassis Box - Hammond, 17" x 13" x 3", 1444-17133
Special Order Item
Hammond natural aluminum chassis box. Measures 17" x 13" x 3".
Please Log In to view prices
Chassis Box - Hammond, 1590G, Diecast, 3.94" x 1.97" x 0.83"
Special Order Item
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x 1/2" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Add 0.16" to enclosure depth for lid.
Please Log In to view prices
Chassis Box - Hammond, Utility, 1411L
Special Order Item
Hammond Mfg aluminum utility enclosure 5.0” length x 4.0” width x 3.0” height. Key Features:
  • "1411" series - 0.04" thick aluminum
  • Four 6-32 x ¼” self-tapping screws included.
  • ASA 61 grey - baked powder paint.
  • Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
Please Log In to view prices
Cover Plate - Hammond, Aluminum, 10" x 8"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
Please Log In to view prices