Enclosures / Chassis

Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

Uniquely shaped trapezoid Hammond enclosure. Screws included.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

20 gauge bottom chassis plate for P-H1444-16 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-178

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Six 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Same as Hammond P-H1590BB, but generic manufacture made in Taiwan. Measures 4.71" x 3.70" x 1.18" deep. Holes are drilled for pots, footswitch and jacks. Holes are 1 @ ½" dia., 2 @ 3/8" dia, and 2 @ 8 mm dia. Add 0.16" to enclosure depth for lid.

Hammond Chassis Box, Steel, 12 in. x 8 in. x 3 in.

• Spot welded heavy duty construction chassis.
• 0.036"" thick.
• Dimensions shown are exterior dimensions.
• Does not include cover. See P-H1431-22 Key

The Gorva Design M45 enclosure has similar dimensions to 1590A but a bit larger for practical use. It measures 100mm [3.94"] x 45mm [1.77"] x 35 mm [1.38"]. The extended dimensions allow for easier builds and top mounted jacks. Features:

• Slightly beveled top and rounded corners for a high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room for a more flexible layout.
• Smooth, eggshell-like matte powder coating.
• Recessed bottom lid

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-137

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-26

4.40" x 2.38" x 1.65" (112mm x 61m x 42mm) diecast aluminum enclosure. Equivalent to the Hammond 1590BS enclosure. This enclosure is a taller version of the 1590B allowing for top mounted jack and more overall area for larger projects.

20 gauge bottom chassis plate for P-H1444-22 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

15° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 2" (1” height at front)
• Bottom panels are 0.081” (2 mm) thick aluminum
• Top panels are 0.064” thick aluminum
• Fully Powder Coated
• Comes with self adhesive rubber feet and required mounting hardware.

Large 6.02” x 3.27” x 1.98” Hammond 1590P1 enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

20 gauge bottom chassis plate for P-H1444-12 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-22

Fender® style narrow panel Tweed Princeton™(5F2) chassis.

• Chrome plated steel, .06" thick.
• Screened white lettering
• 8-Pin (Octal) socket holes: 2
• 9-Pin (miniature) socket holes: 1
• Chassis Dimensions: 13-3/4" x 4-1/8 x 2-1/2"

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-18

Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-30

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-22 or P-H1431-22BK3

Hammond Chassis Box, Aluminum, 12 in. x 8 in. x 3 in. Spot-welded heavy duty construction, natural finish. See P-H1434-22 for cover.

Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-8

Hammond Mfg 20 gauge steel 16” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).