You are here

Enclosures

 

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(13 pages)
P-H1590BChassis Box - Hammond, Unpainted Aluminum, 4.37" x 2.37" x 1.22"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Please Log In to
view prices
Click to read more
P-H1444-16Chassis Box - Hammond, Aluminum, 10" x 6" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-16
Please Log In to
view prices
Click to read more
P-H1590ACEChassis Box - Unpainted Aluminum, 3.64" x 1.52" x 1.06"

Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.


Please Log In to
view prices
Click to read more
P-H1590DChassis Box - Hammond, Unpainted Aluminum, 7.38" x 4.70" x 2.05"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Please Log In to
view prices
Click to read more
P-H1590AChassis Box - Hammond, Unpainted Aluminum, 3.64" x 1.52" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Please Log In to
view prices
Click to read more
P-H1444-18Chassis Box - Hammond, Aluminum, 13.5" x 5" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-18
Please Log In to
view prices
Click to read more
P-H1590CChassis Box - Hammond, Unpainted Aluminum, 4.72" x 3.70" x 2.07"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Please Log In to
view prices
Click to read more
P-H1444-22Chassis Box - Hammond, Aluminum, 12" x 8" x 2"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-22
Please Log In to
view prices
Click to read more
P-H1590BBChassis Box - Hammond, Unpainted Aluminum, 4.67" x 3.68" x 1.18"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Please Log In to
view prices
Click to read more
P-H1590LBChassis Box - Hammond, Unpainted Aluminum, 1.99" x 1.99" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Please Log In to
view prices
Click to read more

Pages

(13 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Enclosures