Pedal Parts / DIY

¼" Jack - Switchcraft, Enclosed, Stereo
The Switchcraft Type 112BX enclosed ¼” jack is a high quality jack. This jack has three solder lugs. One for the tip, one for the ring, and one for the sleeve. These jacks have been widely used across the industry and can also be found in many popular 5U synthesizers. Includes nut and washer.
  • Type 112BX
  • 0.276" bushing length (standard)
  • Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing.
  • Stereo 3-Conductor
  • Includes nut and washer

See W-SC-111X for mono version
Please Log In to view prices
¼" Jack - Switchcraft, Mono, isolated break circuit
Switchcraft Type 13E phono jack. Mono 2-conductor isolated break circuit. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Includes nut and washer.
Please Log In to view prices
¼" Jack - Switchcraft, Mono, isolated make circuit
Switchcraft ¼" Mono 2-Conductor Input Jack, Isolated Make Circuit (Type 13). Includes nut and washer
Please Log In to view prices
¼" Jack - Switchcraft, Mono, open circuit
Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.
Please Log In to view prices
¼" Jack - Switchcraft, Mono, shunt tip
Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer
Please Log In to view prices
¼" Jack - Switchcraft, Mono, transfer circuit
1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.
Please Log In to view prices
¼" Jack - Switchcraft, Stereo, double open circuit
Switchcraft Type 12B Littel-Jax stereo phone jack. Mates with standard ¼" plugs and is available with 0.25" inside diameter bushing. Stereo 3-Conductor double open circuit (does not have switched terminal). Includes nut and washer.
Please Log In to view prices
¼" Jack - Switchcraft, Stereo, shunt tip
Switchcraft 1/4" stereo jack, 4 solder lugs include: tip, tip-shunt, ring and sleeve.
Please Log In to view prices
9V Battery Cushion - Vinyl Foam Tape, 3M, ½” x 2”
1/2 inch by 2 inch adhesive foam strip for cushioning 9V batteries in pedal enclosures. This black, medium density foam used an acrylic adhesive and paper liner. The high quality 3M materials ensure a durable foam and lasting adhesive. Made with ¼ inch thick foam.
Please Log In to view prices
Adjustment Tool - Bourns Trimpots, H-90
Bourns trimmer adjustment tool. This tool is compatible with both the R-VT96Y-X multiturn trimmers and the R-VT62P-X single turn trimmers. The recessed end is especially helpful when used with the 3296Y trimmers to avoid slipping off of the screw adjuster. Features
  • Meets UL 94V-0
  • Pocket clip
  • For use on most trimmer shafts/rotors
  • Recessed end for use with extended shafts
  • RoHS compliant
Please Log In to view prices
Amp-top Enclosure - Hammond, 20 ga. Steel, 4" x 6" x 3"
High quality powder coated amp-top enclosures from Hammond’s 1454 Series. These cases are a great choice for amp top effects such as the Dallas Rangemaster. Features
  • Made of strong, economical 20 gauge steel.
  • Rugged powder coat finish: beige panels with textured black covers.
  • Choice of sloping or vertical front panels by reversing the case.
  • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.
Please Log In to view prices
Audio Power Amplifier - LM380, Class-AB, 2.5W, 14-Pin DIP
LM380 power amp in a 14-pin DIP package. The LM380 is a power audio amplifier for consumer applications. In order to hold system cost to a minimum, gain is internally fixed at 34 dB. A unique input stage allows ground referenced input signals. The output automatically self-centers to one-half the supply voltage. The output is short circuit proof with internal thermal limiting. The package outline is standard dual-in-line. The LM380N uses a copper lead frame. The center three pins on either side comprise a heat sink.
Please Log In to view prices
Audio Power Amplifier - LM386N-1 / 4, Low Voltage
LM386 Low Voltage Audio Power Amplifier The LM386 is a mono low voltage amplifier that can be used in a variety of applications. It can drive loads from 4 Ω to 32 Ω. The gain is internally set to 20 but it can be modified from 20 to 200 by placing a resistor and capacitor between pins 1 and 8. As this is an Op Amp it can be used in different configurations to fit in several applications. The internal gain setting resistor allows the LM386 to be used in a very low part count system. In addition a series resistor can be placed between pins 1 and 5 to modify the gain and frequency response for specific applications. These are found in many small audio amplifiers and even tiny pedal sized guitar amplifiers! There are tons of possibilities for this little Op Amp.
Please Log In to view prices
Barrel Plug - Cliff, Cable Mount, 5.5mm External, 2.1mm Internal
Genuine Cliff barrel plug for use with 5.5mm / 2.1mm barrel jacks. This plug is great for repairing power supplies and making cables. The outside housing is made of a thick durable plastic.
Please Log In to view prices
Barrel Plug - Switchcraft, Cable Mount, Heavy Duty, 5.5mm External, 2.1mm Internal
Heavy duty mil-spec barrel plug from Switchcraft. The S10 is a high current, non-sealed power jack with a similar design as the ¼” jacks from Switchcraft. The plug is rated for up to 11A of current.
Please Log In to view prices
Battery - 9V, Carbon Zinc, GP, Greencell, Extra Heavy Duty
Extra heavy duty carbon zinc batteries from GP. The GP Greencell 9V is a favorite for fuzz pedals and is the stock battery for many boutique builders such as D*A*M and others. Additionally, these batteries are a great choice for any low current battery powered pedal or other devices.
Please Log In to view prices
Battery - AA, Carbon Zinc, GP, Greencell, Extra Heavy Duty
Extra heavy duty carbon zinc batteries from GP. The GP Greencell AA is a favorite for fuzz pedals like the FZ-1 / FZ-1A and is the stock battery for many boutique builders such as Pigdog and others. Additionally, these batteries are a great choice for any low current battery powered pedal or other devices.
Please Log In to view prices
Battery Box - Dunlop, snap-in enclosure
Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.
Please Log In to view prices
Battery Box - Gotoh, BB-02, Single, 9 volt, with removable adapter
Single 9 volt battery box. See P-ECB-9V1A for single battery box without removable adapter. See P-ECB-9V2 for double battery box.
Please Log In to view prices
Battery Box - Gotoh, BB-04, Single, 9 volt
Single 9 volt battery box. See P-ECB-9V1B for single battery box with removable adapter. See P-ECB-9V2 for double battery box.
Please Log In to view prices
Battery Box - Gotoh, BB-04W, Dual, for 9 volt batteries
Dual 9 volt battery box. Two 9V battery compartments, each compartment having its own red and black wires for battery positive and negative connections (4 wires total) allowing for series, parallel or separate connections of two 9V batteries. Four wood screws included. Directions: 1. Refer to the Drawing B and make a hole on guitar body. 57.5 mm (2.26") x 49.5 mm (1.95"), R6 (6 mm = 0.24") 2. Put the box in guitar body and fix it by screws.
Please Log In to view prices
Battery Clip - 9 Volt with Vinyl Tab
Single standard snap-on 9V battery clip. Features six inch pre-stripped and pre-tinned leads for an easy connection.
Please Log In to view prices
Battery Clip - Premium, 9 Volt, Rigid Frame, I-Style
Premium 9V battery clip with a rigid plastic frame and I-style wire orientation. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.
Please Log In to view prices
Battery Clip - Premium, 9 Volt, Rigid Frame, T-Style
Premium 9V battery clip with a rigid plastic frame. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.
Please Log In to view prices