Cymbal care formula - PROcussionCare®

Item Unavailable

Sorry! You are trying to check out one of our items which is no longer available. Why not check out one of these alternate options?

Maintenance Kit - Dunlop, Guitar care products
Everything you need to do a deep clean and polish on your guitar’s fingerboard, finish, and strings.The Dunlop System 65 Guitar Maintenance Kit will help you keep your guitar in top notch condition. Set includes the following:
  • Bodygloss 65 Cream of Carnauba polishes, protects, and beautifies
  • Formula No. 65 cleaner/polish shines up your guitar’s body while eliminating any built up grime.
  • Ultraglide 65 String Cleaner/Conditioner cleans your strings and extends string life while eliminating string squeaks.
  • Fingerboard 01 Cleaner and Prep dissolves away unwanted dirt and residue from your fingerboard
  • Fingerboard 02 Deep Conditioner replenishes your fingerboard with natural protective oils.
  • Also includes 2 microfiber cleaning cloths, a micro fine fret polishing cloth, and a complete step-by-step guitar guide

Give your guitar some top level love!
package of 5
Please Log In to view prices
Tech Kit - Dunlop, Guitar care products
Everything you need to properly clean and maintain your guitar’s fingerboard, finish, and strings! The Dunlop System 65 Guitar Tech Kit will help you keep your guitar feeling great and shining like a new nickel. Set includes the following:
  • Formula No. 65 cleaner/polish shines up your guitar’s body while eliminating any built up grime.
  • Fretboard 65 Ultimate Lemon Oil cleans and conditions your fretboard to protect against drying and cracking.
  • Ultraglide 65 String Cleaner/Conditioner cleans your strings and extends string life while eliminating string squeaks.
  • Also includes 2 microfiber cleaning cloths, a micro fine fret polishing cloth, and a string winder

Step up and give that grimy guitar a fresh start!
package of 3
Please Log In to view prices
Corona Dope - GC Electronics, lacquer coating, 2 oz.
Corona Dope is useful for insulating components, circuits and assemblies. It has high dielectric strength and is especially useful where high voltages are involved. Also has excellent arc and corona resisting properties and protects surfaces against moisture. Cures in 20 minutes at room temperature. GC Electronics Corona Dope is commonly used to reseal flyback transformers and other parts on CRT monitors and displays.
  • Color: Black
  • Specific Gravity: 0.9
  • Dielectric Strength: 3800 V/Mil
  • Softening Point: 180°C to 190°C
  • Temperature Range: Up to 340°F
  • Viscosity @ 25°C: 220 cps
Please Log In to view prices
Membrane repair - Caig, Caikote 44 carbon coating
Conductive Carbon Coating for most surfaces (rubber, epoxy, glass, plastic). It is ideal for repairing membrane buttons, keyboard buttons, and other carbon based surfaces. It may also be used as a coating for shielding (EMI) of electronics. Similar products on the market are more expensive, and have multiple containers requiring mixing prior to application. The CaiKoteTM 44 is applied in one step, allowed to dry and is ready for service.
Please Log In to view prices
Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
Please Log In to view prices
DeoxIT® Gold - Caig, Electronic Maintenance Kit
Special Order Item
Chemically improves ALL metal to metal connections and contacts for clearer audio, clearer video, and reliable data. Includes: DeoxIT® brush applicator (#D100L-2DB), (Applications = 500 ± brush strokes, 10mm long) DeoxIT® GOLD brush applicator (#G100L-2DB), (Applications = 500 ± brush strokes, 10mm long) Lint-free swabs, brushes and cloths
package of 2
Please Log In to view prices
DeoxIT® - Caig, Shield SN5 Spray, 5% solution
DeoxIT® SHIELD S5 Spray (formerly PreservIT P5S-6), 5% solution, flushing action, 142 g, (Applications = 1200 ±). Seals, lubricates and protects metal surfaces against oxidation and contamination. Use on clean/new surfaces or those precleaned with DeoxIT® D-Series contact cleaner.
Please Log In to view prices
DeoxIT® Shield Wipes - Caig, 100% solution, 50 count
Special Order Item
Protects and lubricates electronic connections. Ideal for severe environments; humidity, salts, pllutants, sulfer, etc. Safe on plastics.
  • Cleaner Audio
  • Clearer Video
  • Reliable Data
package of 50
Please Log In to view prices
DeoxIT® - Caig, D5 Spray, Low-Medium-High Spray
DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion.
Please Log In to view prices
Lubrication - Dr. Duck's, Ax Wax & String Lube, Organic
For use on the entire fretboard, headstock, front,sides, back and pickguards. Also cleans and lubes bridge saddles, fine tuners on locking tremolo systems, tuning machine knobs and posts. US made with US materials, 4 oz.
Please Log In to view prices
Tool - Potentiometer Cleaning Cap, Aluminum
Potentiometer cleaning caps for use with aerosol cleaners such as DeoxIT. This is a great tool for difficult to clean potentiometers such as those on hollow body guitars and certain amp chassis. The design pushes the spray in through the bushing of the potentiometer removing the need to access the back of the potentiometer. To use: Remove the knob and thread the cleaning cap onto the potentiometer. If there is enough bushing, attach the rubber o-ring first. If not, simply thread the cleaning cap onto the bushing and place a rag around it. Using a rag is recommended with and without the o-ring. Insert the DeoxIT straw into the small hole on the side of the cleaning cap. Cover the open end with your finger and spray. The cleaning solution is directed to the shaft of the pot where it can seep in. You can turn split shaft pots with a screwdriver through the open end to help move the cleaner around inside the pot.
Please Log In to view prices
DeoxIT® Fader F5 - Caig, 5% solution
This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
Please Log In to view prices
Adhesive - Bob Smith Industries, Insta-Cure Super Thin
Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers! Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam. For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.
  • Water-thin consistency
  • 1-3 second cure time
  • For tight fitting applications
  • Available in 1oz. and 2oz. sizes

WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!
Please Log In to view prices
Cleaner - Caig, Contact Cleaner Wash
Contact Cleaner Wash, Val-U Series Spray, adjustable valve, 5.5 oz., fast evaporating and safe on plastics.
Used for switches/relays, contacts/connectors, and parts/components.
Please Log In to view prices
Adhesive Applicator - Bob Smith Industries, 6” long, Non-clog
Non-clog 6" long pipette for CA glue application. The regular tip is recommended for gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper The fine tip is recommended for the application of thin CAs. It can also be used for the fine application of Insta-Set accelerator and for applying fine lubricating oils. CA can be kept in the applicator for two weeks.
Please Log In to view prices
Polish - Lizard Spit, for guitar cleaning / polishing
Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.
Please Log In to view prices
Adhesive - Bob Smith Industries, Insta-Cure Gap Filling
Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!
Please Log In to view prices
Container - Jar, Clear Round Mouth, White Cap, 2 oz
2 oz clear jar with a white cap. Instant identification for your parts, liquids or dry goods. Super wide mouth for easy filling.
  • Durable polystyrene jars.
  • FDA compliant.
  • Caps included.
Please Log In to view prices