Clearance Items

The Smooth BS 15N/350A is a 15" neodymium speaker with 350 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics. They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it. The 15'' bass speaker provides a full and warm low-end that will fill the room.

The Maxon AD9Pro is a high quality analog delay with up to 450ms of delay time using Maxon’s MC4107D BBD chip. With two delay modes and a wide range of control, the AD9Pro offers transparent analog delays that fit any genre. Features

• Switchable Single Head/Dual Head modes. In Dual Head mode, the midstream delay signal is mixed back into the delay.

Compactron beam power pentode primarily designed for RF power output applications. Features of the 8950 are dual cathode and grid connections for lower lead inductance, and a 13 volt heater.

The Tornado Stealth 80 is the Neodymium counterpart of the ceramic powered Electric Lightning. The Stealth 80 is extremely efficient, with slightly scooped mids, and it shines in the cleanest as well as in the heaviest tonal applications. It delivers exceptional punch and attack, retaining all the clarity needed for palm-muted riffs and power chords, as well as crystal clear clean rhythm playing.

The N12D is able to return the feel, the warmth and the character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar. The Neodymium magnet design allows a weight reduction to only 2.4kgs.

The 5881 is the electrical equivalent to types 6L6 and 6L6GC except that the plate and screen dissipation ratings have been increased approximately 20 percent.

Dual Triode, Gold Pins

The Maxon CP101 is a classic compressor pedal that offers up to 42dB of natural sounding compression for a controlled sound with plenty of sustain. The CP101 is designed to preserve the sound of the guitar with its transparent attack and clean tone. Features

• Clean and natural compression with little change to the original tone
• Limiter-like effects for consistent levels.
• Transparent pick attack and relaxed sustain for lead guitar
• Great for bass guitars and semi-acoustic guitars
• LED indicator for effect on/off
• DC power or 9V battery
• Made in Japan

Bushings, washers and screws for Grover® Machine Heads.

High-perveance beam power amplifier designed as a direct retrofit for the 6AR6 or 6098 in aircraft, military, and industrial applications

Hipshot 4 string Supertone 2 point bass bridge. A direct replacement for 1967 to 1973 Gibson 2 point bass bridges (e.g. Thunderbird, SG Bass, etc.) using the existing hole pattern. Features complete adjustability for precise intonation, independent string height and side-to-side string spacing. Includes: (2) 5/16-20 hex cap socket screws and (2) hex/allen keys: 1/16” and 5/64”

The C12D is able to return the powerful, organic, warm tone and character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar.

This McNelly Cornucopia pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.

Designed by pickup guru Tim Shaw, the robust-sounding Double Tap™ pickup is a revolutionary breakthrough in humbucking pickup technology. This unique, patent-applied-for design combines full-throated humbucking and articulate single-coil voices, while eliminating volume loss in single-coil mode. A special alnico 4 magnet creates an expressive, well-defined voice that’s highly musical and dynamic. A light wax potting controls runaway feedback without compromising response.
Features:

• No volume loss in single-coil mode
• Wax-potted to control feedback
• DC Resistance/Magnet Type:
• 8KΩ/alnico 4
• Includes installation hardware

Beam power pentode primarily designed for use in audio frequency power amplifier applications. The tube is a direct replacement for the 6V6Gt, but features additional controlled zero-bias characteristics.

The 8 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.

Grover 143 Series Lightweight Bass Guitar Machines. For the ultimate in weight control, Grover offers the 143 series for Bass Guitar. With a plastic housing and aluminum string post, this lightweight bass key is perfect for the player who is concerned about the overall weight of the instrument. The 20:1 gear ratio provides the finest tuning available. Several configurations and are offered, all with a black plastic bass plate and plated button and post. (Includes: four bushings having an outer diameter of 0.66” and internal M19 x 1.0 threading and four washers). 4 Treble, Set of 4

For the ultimate in weight control, we offer the 143 series for Bass Guitar. With a plastic housing and aluminum string post, this lightweight bass key is perfect for the player who is concerned about the overall weight of the instrument. The 20:1 gear ratio provides the finest tuning available. 2 treble and 2 bass.

Vibramate Left Handed V5 Adapter Mounting Kit, For Bigsby B5 Now you can install a Bigsby Vibrato on your guitar without drilling any holes! The Vibramate Left Hand V5 Model Quick Mount Kit is designed for a Bigsby B5 Original Vibrato and will fit most traditional style guitars that have a tune-a-matic style bridge and a stop-tailpiece. The kit installs in minutes with the included hardware and eliminates the need for drilling permanent holes in your instrument. Vibramate comes with 3 felt-pads secured to the bottom of the mounting plate for a soft touch to the top of your guitar. The unit automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance.

The Gotoh 404BO-4 is a solid bass bridge for bassists looking for the best performance available from their bridge. The thick hard zinc plate paired with brass saddles offers a balanced tone. The saddles feature two height adjustment screws to dial in the perfect action as well as a wide area of travel for a perfect intonation. The height adjustment screws sit in slots on the bottom plate for additional stability. This string through bass bridge comes with a mounting hardware and also includes a hex wrench for saddle adjustments.

Kent Armstrong “Jazzy Joe” jazz pickup with adjustable pole pieces, side-mount configuration. Nickel. Made in the style of Gibson’s early 1960’s Johnny Smith guitars with floating mini-humbucker pickups, this jazz pickup is perfect for use with traditional arch-top electric guitars. Its non-invasive mounting capabilities keep the guitar’s acoustic properties uninhibited. Magnet Type = Alnico 5 Magnet Dimensions = 55mm Long x 3mm Thick x 12.5mm Wide D.C. resistance = 7.9K (two solder lug connections on underside) Pickup Dimensions: 7/16 in. (11.1mm) Thick – not including pole pieces 1 7/64 in.

Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD510 series solves these problems by combining “Rock-solid"™ technology and the post collar or: “self-center guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD510 series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through it is use of the ideal materials selected for each component part you also obtain a far superior sound. 1:15 gear ratio.

Upgrade your tuners and improve the tuning accuracy and stability of your guitar with Hipshot's Tuner Upgrade Kit. With the patented UMP™ (Universal Mount Plate) included free in this kit, tuners will retrofit without drilling or screwing

Gotoh’s GB10 bass tuners are a classic bass tuner set that can be found on many basses, new and old. These tuners are used on both vintage Fender® guitars and new production models sold today. Please check dimensions below for compatibility. The clover shape tuning keys, 20:1 gear ratio, Gotoh’s inner friction free ring, and a solid footprint mount make these a great option for any bass guitar. Mounting screws and press fit bushings are included with this set.