Clearance Items

Cover Plate - Hammond, Aluminum, 8" x 6"
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
Please Log In to view prices
Footswitch Box - Fender, Two Button (Channel, Chorus)
Two button Fender®, ¼" plug (channel & chorus).
Please Log In to view prices
Footswitch Box - Fender, for Champion Amps
One button, ¼" plug, Champion channel.
Please Log In to view prices
Amp Cover - Orange, for Cabinets and Combos
Orange™ cabinet/combo covers. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo.
  • Standard 1x12 fits RK30TC / CR60C / CVR-112 Combo
  • Standard 2x12 fits AD30TC / RK50C / CR120
Please Log In to view prices
Speaker Grill - Peavey, with mounting hardware
Peavey Grill Kit (for speaker cone and dust cap protection)
  • Manufactured from 1.2mm steel
  • Matte black powder coated paint finish
  • Surrounded with rubber trim insulator to reduce rattle
  • Four 90 degree mounting brackets and 1/4-20 hardware included
Please Log In to view prices
Pickguard - Fender®, for Standard Stratocaster, 11-hole
Colors Available:
Original Fender® double fat pearloid, 4-ply, 2 Hum 11 Hole. NOTE: The humbucker route is not compatible with covered humbuckers. Only uncovered humbuckers will fit in this route without further modification. Humbucker mounting screw holes are NOT pre-drilled.
Please Log In to view prices
Pickup - Kent Armstrong, Icon 57, Strat (Alnico 3)
Slightly hotter than the 54 models, these recreations of the 1957 Strat® single coil pickups deliver a true vintage tone not available until now. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.
  • Magnet Type = Alnico 3 pole pieces
  • D.C. Resistance = 5.92k Ohms
  • Inductance (henrys) = 3.61
  • Wire Type = Formvar AWG 42
  • Lead Type = cloth insulated 2 conductor
  • Polarity = normal
Please Log In to view prices
Pickup - Kent Armstrong, Icon 62 Neck, Strat (Alnico 3)
Slightly hotter even than the 57 models, these recreations of the 1962 Strat® single coil pickups deliver a true vintage tone that is a blast from the past. Middle position reverse wound/reverse polarity to achieve noise cancellation when utilizing a 5 way switch. 42 gauge Formvar wire and Alnico III magnets. White covers.
  • Magnet Type = Alnico 3 pole pieces
  • D.C. Resistance = 6.19k Ohms
  • Inductance (henrys) = 2.63
  • Wire Type = Formvar AWG 42
  • Lead Type = cloth insulated 2 conductor
  • Polarity = normal
Please Log In to view prices
Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
Please Log In to view prices
Transformer - Hammond, Low Voltage / Filament, Open, 10 VCT
  • Open style, chassis mount transformers with a 115V 60Hz primary and a 10V center tapped secondary
Please Log In to view prices
Transformer - Hammond, Low Voltage / Filament, Enclosed, 60 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 60 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).
Please Log In to view prices
Transformer - Hammond, Low Voltage / Filament, Enclosed, 12.6 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 12 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).
Please Log In to view prices
Transformer - Hammond, Low Voltage / Filament, Enclosed, 5 VCT
  • Primary 115 VAC, 60 Hz.
  • Secondary 5 C.T.
  • All secondaries center tapped, VAC (RMS)
  • Enclosed, 4 hole chassis mount.
  • Minimum 6" long leads.
  • Dual bobbin design - no electrostatic shield required.
  • Class B insulation (130 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • UL listed (# E50394) & CSA certified (209651).
Please Log In to view prices
Transformer - Hammond, Global Use, Dual Primary 115/230 VAC
  • Dual primary 115/230 VAC
  • 50/60 Hz. operation
  • Dual secondaries for series or parallel connections
  • 4,000 V RMS Hipot test
  • Class F insulation (155 degrees, C)
  • Chassis mount
  • Dual bobbin construction
  • Dual use terminals
  • C UL US recognized (E207860)
  • TUV Type Approved
  • CE certified to IEC 950 (Approved to EN 60-742 Safety Isolating Transformers)
Please Log In to view prices
Vacuum Tube - 11MS8, Triode, Pentode
Miniature type used in combined vertical-deflection-oscillator and vertical-deflection-amplifier applications in black and white television receivers. Requires miniature 9-contact socket.
Please Log In to view prices
Vacuum Tube - 12BL6, Pentode
Miniature remote-cutoff pentode intended for use as a radio-frequency or intermediate frequency amplifier in automobile radio receivers.
Please Log In to view prices
Vacuum Tube - 12DQ7, Pentode, Sharp Cut-Off
Miniature power pentode primarily designed for use as the video output amplifier in television receivers. Features of the tube include high transconductance, low interelectrode capacitances, and high power sensitivity.
Please Log In to view prices
Vacuum Tube - 19J6, Triode, Dual
Miniature type of medium-mu twin triode intended especially for coverter service in ac/dc FM and AM receivers. In such service, one triode unit may be used as a mixer, and the other as an oscillator.
Please Log In to view prices
Vacuum Tube - 26HU5, Beam Power Amplifier
Glass octal type used as horizontal-deflection amplifier in color television receivers.
Please Log In to view prices
Vacuum Tube - 36AM3B, Rectifier, Half Wave
Half-wave rectifier in the 7 pin miniature construction. Features of the tube are a 100mA. heater with 20 second warm-up time.
Please Log In to view prices
Please Log In to view prices
Vacuum Tube - 5902, Tetrode, Beam Power
The premium subminiature type 5902 is a beam power pentode designed for use as an audio amplifier. It is intended for operation under conditions of severe shock, vibration, high temperature, and high altitude.
Please Log In to view prices
Vacuum Tube - 6550A, Beam Power Amplifier, Tubular Glass
Beam-power pentode primarily designed for use in audio-frequency power-amplifier applications. It carries a 42 watt plate dissipation rating which provides for push-pull amplifier designs up to 100 watts output.
Please Log In to view prices
Please Log In to view prices