Clearance Items

This McNelly Stagger Swagger pickup features an open nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.

9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:

• Center PCB hole diameter -0.73"
• Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")

Deep-drawn steel case with tin plated finish, with two convenient 6-32 mounting studs with mounting hardware. Sealed case and wax potted core internally for stable characteristics and long life. Wide frequency response +/- 0.5 db max. from 20 Hz. to 20 Khz. (except units over 5K ohms impedance, may be down 1 db @ 20 Khz.) Insertion loss of apx. 1 db.

The oscillation frequency range of this audio generator is between voice frequency band and super voice frequency band. Square and sine wave. 10K ohm input impedance, 10 V rms maximum input voltage. 600 ohm output impedance. Equipped with synchronized input terminals, enabling the high power output signas to be accurately controlled by small signals. comes with test lead and ground lead. 5.9" high x 9.8" wide x 5.1"deep.

Miniature power pentode primarily designed for use as the video output amplifier in television receivers. Features of the tube include high transconductance, low interelectrode capacitances, and high power sensitivity.

Sharp cut-off general purpose amplifier. With the exception of heater and capacitance ratings, the electrical characteristics are similar to those of the 6C6.

Miniature sharp cutoff pentode designed for use where only low plate and screen voltages are available. The 6AJ5 is especially suitable for operation at high frequencies.

High vacuum full wave rectifying tube.

The Smooth BS 15N/350A is a 15" neodymium speaker with 350 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics. They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it. The 15'' bass speaker provides a full and warm low-end that will fill the room.

• 1" exit lightweight and compact ferrite magnet compression driver with 1.4" copper clad aluminium voice coil
• 20Wrms power handling (AES standard) and 106dB sensitivity
• One piece PETP diaphragm and surround
• Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design
• Suitable for 2-way and 3-way systems

The Mod 12-110 is a 12" ferrite speaker with 110 watts of power. Strong, punchy, and articulate with emphasis on the mids. It responds to overdrive distortion with a tight and balanced fuzz that remains strong and straightforward. The MOD® Speakers lineup is a collaborative effort with MOD® Electronics that provides musicians with a classic sounding speaker voicing that doesn't shy away from new technologies and modern advancements. Unbound from the restraints of producing an authentic reissue, Jensen® and MOD® have developed a new series of speakers that carefully blends the clarity of the vintage Americans with the forward, driving tone of their vintage British counterparts. The result is an extremely versatile sound that sits well in any mix, be it classic rock, blues, jazz, or contemporary genres. Guitarist Description: Strong, punchy, and articulate with emphasis on the mids.

Hipshot 4 string Supertone 2 point bass bridge. A direct replacement for 1967 to 1973 Gibson 2 point bass bridges (e.g. Thunderbird, SG Bass, etc.) using the existing hole pattern. Features complete adjustability for precise intonation, independent string height and side-to-side string spacing. Includes: (2) 5/16-20 hex cap socket screws and (2) hex/allen keys: 1/16” and 5/64”

Original, made in USA, covers for mini humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.

Genuine Bigsby® conventional Telecaster bridge for use with Bigsby vibrato. This is the stock bridge assembly used in B16 vibratos.
2 13/16” stud spacing.

Genuine Bigsby® replacement handle stud.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Threaded thumbwheel style studs and anchor bushings. Hardware included.

Direct replacement for most Fender 5 String P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included. Hardware included.

A modern version of the Tune-o-matic ABR-1 style bridge for guitars, chrome. This style of bridge was used on classic guitars from the 50s through the 70s. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle.

Machine heads without a sealed gear are criticized for not having the same smooth performance, efficiency and durability that sealed gear tuners have. The SD510 series solves these problems by combining “Rock-solid"™ technology and the post collar or: “self-center guide", found on enclosed gears in the base plate of the gear allowing the post to perfectly align itself with the bushing which attaches the gear to the headstock. The SD510 series uses a torque balancer to ensure steady rotation of the tuner button giving high quality sound performance as well as great functionality. Through it is use of the ideal materials selected for each component part you also obtain a far superior sound. 1:15 gear ratio.

Set of 6 tuners - 3 per side with keystone knob. 1:15 gear ratio. Hardware included.

Upgrade your guitar with the sleek, precision built Classic Guitar Tuning Machines from Hipshot. With it's open gear design and sleek look, the Hipshot Classic Open Guitar Tuning machine is simultaneously vintage and modern. Smooth 18:1 gear ratio. Sold individually.

Hipshot's New Classic Closed (enclosed gear) Guitar Tuners posses the precision, craftsmanship and technology you have come to expect from Hipshot Products.

• 16:1 gear ratio for finer tuning
• Schaller M6L Mini footprint.
• The option for staggered post configuration means you can increase your headstock's break angle, remove buzz at the nut and ditch your pesky string tree!

The 8 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.

Hollow Point® Intonation System for Double Locking Tremolos. For 6 string guitar. The Hollow Point® Intonation System is designed for use with most Floyd Rose® style/licensed and Ibanez® Edge double locking tremolos where the fine tuner makes direct contact with the string lock screw. Multiple color options available.