Clearance Items

The Gotoh 404BO-4 is a solid bass bridge for bassists looking for the best performance available from their bridge. The thick hard zinc plate paired with brass saddles offers a balanced tone. The saddles feature two height adjustment screws to dial in the perfect action as well as a wide area of travel for a perfect intonation. The height adjustment screws sit in slots on the bottom plate for additional stability. This string through bass bridge comes with a mounting hardware and also includes a hex wrench for saddle adjustments.

A unique modern Tune-o-matic style locking bridge. Mounts on Allen height-adjustable studs in threaded bushings. For solid body guitars. Hardware included.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Standard mounting post style. Hardware included.

Set of 6 tuners - 3 per side with round knob. 1:15 gear ratio. Hardware included.

This is the recreation of the popular Kluson® #9 tailpiece. This particular model tailpiece was preferred for many vintage era arch-top guitar builds and is still one of the best choices available today. Fits large archtop instruments with a rim thickness of 2-7/8 in. or more. Machined brass.

For the ultimate in weight control, we offer the 143 series for Bass Guitar. With a plastic housing and aluminum string post, this lightweight bass key is perfect for the player who is concerned about the overall weight of the instrument. The 20:1 gear ratio provides the finest tuning available. 2 treble and 2 bass.

Vibramate V5-TEV Stage II with Shorty Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

A1837 Transistor - Fender. Power amplifier applications and Driver Stage Amplifier Applications.

• Primary 115 VAC, 60 Hz.
• Secondary 5 C.T.
• All secondaries center tapped, VAC (RMS)
• Enclosed, 4 hole chassis mount.
• Minimum 6" long leads.
• Dual bobbin design - no electrostatic shield required.
• Class B insulation (130 degrees C).
• Hi-Pot test of 2,000V RMS.
• UL listed (# E50394) & CSA certified (209651).

• Single Primary 115VAC
• Operates on 50/60 Hz.
• Combination solder or quick connect terminals.
• Split bobbin construction eliminates the need for an electrostatic shield.
• Hi-pot tested to 2 KV RMS.
• Economical open style, channel frame - chassis mount design
• UL recognized & CSA certified.

The GrooveTech bass player tech kit provides everything needed for basic work on your axe, and an Easy Setup Guide is included to take the mystery out of it. Tools are professional grade and lifetime guaranteed. Hex keys are USA made - color-coded gold for metric and black for inch - with ball-end tips on truss rod sizes. The 6-in-1 screwdriver has two Phillips and two slotted tips, including the size for vintage-style saddle screws, plus two nut drivers to fit Gibson and other headstock truss rod nuts. The GrooveTech string cutters will be the last set of cutters you'll ever need to buy, and precision measurement tools allow consistent results. The capo frees a hand during truss rod measurements, and there's a compartment behind the tools to store spare strings, your owner's manual, and the Setup Guide; plus another pocket to store picks.

Transmitting beam power amplifier.

Half-wave rectifier in the 7 pin miniature construction. Features of the tube are a 100mA. heater with 20 second warm-up time.

Subminiature pentode for use as an A.F. power amplifier in portable equipment.

XLR 3 pole male, stamped contacts, thermoplastic shell, jaws cable clamp. Plastic. Features:

• Thermoplastic shell
• Solder Bucket connections
• "Jaws" Cable Retention System
• Precision machined contacts
• Leading first mate last break socket contact
• Quick and easy assembly without screws

The OOD9 is the updated version of the original Maxon overdrive pedal, the OD880. This overdrive is equipped with NJM4558D op amps for a warm and low-noise overdrive that pairs perfectly with tube amplifiers and other distortion pedals. The OOD9 offers a dynamic response that preserves the tone of the input providing a smooth and clear overdriven sound.

Recommended for professional audio and bass guitar applications as a woofer/mid-bass or midrange in vented monitors, satellites and multi-way enclosures.

With a massive 100W power rating, this speaker sits perfectly in high-power or hybrid amplifiers. It voices a modern sound with a big bass presence.

Genuine Bigsby® replacement hinge for Gretsch by Bigbsy B3C and B6C vibratos.

Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.

Vibramate V5-TEV Stage II with Humbucker Ash-Tray bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Orange™ cabinet/combo covers. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo.

• Standard 1x12 fits RK30TC / CR60C / CVR-112 Combo
• Standard 2x12 fits AD30TC / RK50C / CR120

Original Fender® double fat pearloid, 4-ply, 2 Hum 11 Hole. NOTE: The humbucker route is not compatible with covered humbuckers. Only uncovered humbuckers will fit in this route without further modification. Humbucker mounting screw holes are NOT pre-drilled.

This McNelly Stagger Swagger pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.