Clearance Items

Beam power tube - high power sensitivity RCA "Dark Heater" with 12 to 15 volt range.

The N12D is able to return the feel, the warmth and the character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar. The Neodymium magnet design allows a weight reduction to only 2.4kgs.

Beam power pentode primarily intended for use as an audio frequency power amplifier. It is particularly useful in applications where the available supply voltage is relatively low.

Like its 12” version, the Tornado 10 is remarkably versatile, with evenly balanced tone, excellent articulation, and a detailed, dynamic response with a hint of a very musical, sweet dynamic compression. The powerful Neodymium magnet and the 2” voice coil allow for 100W of power handling in a featherlight weight of just 1.7kgs (3.75lbs)

Miniature power pentode primarily designed for use as the video output amplifier in television receivers. Features of the tube include high transconductance, low interelectrode capacitances, and high power sensitivity.

Amphenol "T-Series (Pro Range)" Phone Plug. 1/4" Mono straight plug with large Jaws cable clamp, metal backshell and black finish. Internal cable clamp fits cable outer diameters ranging from 0.236” to 0.295” (6 mm to 7.5 mm).

Eddystone 26827PSLA enclosure with similar dimensions to the Hammond 1590D enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590D style builds.

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Aluminum alloy to BS1490, LM2M - supplied in natural finish.
• Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
• Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
• Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
• Countersunk lid holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

• Primary: Universal - 100, 110, 120, 200, 220,230, 240 VAC 50/60 Hz.
  
  • NOTE: units are designed to operate with BOTH primary windings engaged.
  • See primary wiring information under resources.
• Bias Tap: 50 VAC tap from high voltage secondary C.T. (except part number P-T379WX - uses a separate 60VAC 0.2 Amp winding).
• Highpot tested: 2,000 VAC
• Faraday Copper Primary Shield: Our electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell).
• Windings: Concentric wound for low stray field and low noise.
• Models: This series is an upgrade from our P-T263-X range of units PLUS 2 models designed specifically for 300B tubes (Part Number P-T300BX) and 2A3 tubes (Part Number P-T302AX).
• Finish: Black powder paint to match our P-T1650X series of output transformers Units can be run full wave bridge or full wave C.T.
• Conservative designs - CSA certified (209651).

Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12 Alnico Blue (our SKU's P-A-G12-8 and P-A-G12-15)

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Standard mounting post style. Hardware included.

The Smooth BS 15N/350A is a 15" neodymium speaker with 350 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics. They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it. The 15'' bass speaker provides a full and warm low-end that will fill the room.

Vintage style stamped tuning machine set with solid metal oval buttons mounted on a plate. These nickel finished tuners look great on vintage and Fender® style guitars. The gear ratio is 15:1. All mounting hardware is included in this six on a plate tuner set.

Two button Fender®, ¼" plug (channel & chorus).

High-mu power output triode designed for service in dynamic coupled circuits using a type 76, 6P5GT/G or 6J5GT/G as a driver. Two 6AC5Gs may be used as a zero bias class B amplifier.

This McNelly Stagger Swagger pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.

XLR 3 Pole female audio cable connector. Musician range. Black finish, silver contact plating. "Jaws" cable retention system.

Designed for use on arched top electric guitars Bigsby B16 Specifications

• Model Name: B-12
• Series: Original Kalamazoo Line
• Manufacturing Method: Sand Cast
• Manufacturing Material: Aluminum
• Approximate weight: 344 grams/12.1 oz.
• Overall Length: 8 3/8" / 212.7 mm
• Overall Width: 3 5/8" / 92.1 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Variable-mu pentode amplifier in the octal glass construction. It is suitable for use with AVC in RF and IF amplifier and minimizes cross modulation.

The Tornado Stealth 100 is the original Tornado 12, the first of the new generation of Neodymium speakers in the Jensen offering with an added stylish bell cover over the magnet. Possibly the most versatile Jensen speaker ever, it has clear, almost HD top end, well-balanced midrange and powerful bass end. It lends itself to a wide range of musical genres, with a smooth, never aggressive personality, from fast solo runs, to complex chordal harmonies, to soulful lead tones.

Black Cliff K5 knob with short indicator line. ¼" shaft with set screw. Replacement for Marshall. Measures 0.75" in height. See P-K342-NOI for a version with no indicator line.

Genuine Marshall™ output transformer for JCM900 and JCM2000.

Genuine Bigsby® replacement handle stud.

This is the left-handed version of the Bigsby B3 designed for use on thin electric hollow and semi-hollow guitars. Mounting screws, arm spring, and washer included.

1/4" phone plug, jaws cable clamp, thermoplastic backshell. Features:

• Stylised Shell design with ergonomic grip
• Robust diecast keyed shell
• Great solderability with increased solder area
• Precision machined contacts
• "Jaws" cable retention system
• Quick and easy assembly
• Nickel-plated contacts