Clearance Items

Speaker - Jensen Smooth Bass, 10", BS10N250A, 250W, 8Ω
The Smooth BS 10N/250A is a 10" neodymium speaker with 250 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics.
They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it.
The 10'' bass speaker provides good projection with minimal effort especially in a two or four 10'' cabinet. The sound is powerful in either a single or multi speaker combination.
Please Log In to view prices
Speaker - Peavey, 15", Black Widow 1505-8 DT BW, 700W, 8Ω
The 1505DT is an 8 ohm, 15" Black Widow/Super Structure speaker with a curvilinear cone for extended bandwidth. Offering a rare combination of usable frequency response into the mid-range with a smooth powerful low end, the 1505DT, Kevlar cone and long voice coil provide excellent linearity at high drive levels. Excellent as a woofer in multi-way enclosures or as the bottom end in a two-way system.
Please Log In to view prices
Speaker - Jensen® MOD®, 15", MOD15-200, 200 watts
The Mod 15-200 is a 15" ferrite speaker with 200 watts of power. Tight low-end with clear bright highs. It responds to overdrive distortion with a rhythm crunch and fuzz lead voice.
Please Log In to view prices
Knob - Peavey, Hi / Rev and Low / Mid Control Bottom for KB-300
Hi/Rev and Low/Mid control bottom for concentric potentiometers on Peavey KB-300 keyboard amp. Peavey part: 70902035
Please Log In to view prices
Reverb Tank - Tube Amp Doctor, 4BB3C1B, Long Decay, 2-Spring
  • Replaces: 4BB3C1B
  • Solid, sturdy construction
  • Type: Long (2 Spring) tank
  • Decay: long decay
  • Input: 150 Ω
  • Output: 2,250 Ω
  • Connectors: Input insulated/output grounded
  • Locking: No lock
  • Mounting: Horizontal/open side down


Compatible amps include Fender® Blues Deluxe (original version), Blues Deville (original version), London Reverb, Studio Lead, Harvard Reverb II, Showman 115 (80’s version), Rivera™ Rake, Jake Studio Combo, and Fandango models, Laney™ VC30, Crate™ V-32 Palomino.
"TAD redefines Spring Reverberation. When the manufacturing of Accutronics Reverb cans in the USA has been announced to close down in 2008 TAD started the research for an own high quality production of the classic spring reverberation units. The goal was to create a drop-in replacement bringing back that stunning reverb sound that Fender made so popular since the early 1960s.
The TAD Reverb Cans achieve this goal and even more: deep and smooth reverb, no fluttering but wide frequency response with airy top end instantly inspiring to enjoy guitar playing. The rock solid mechanical design assures a very dependable and consistent quality performance exceeding any expectation. A drop-in replacement and upgrade as well for vintage as for modern reverb cans by size, performance and tone."
-Tube Amp Doctor
Questions about reverb tanks? See our tech articles for more information.
Please Log In to view prices
Reverb Tank - Tube Amp Doctor, 4EB3C1B, Long Decay, 2-Spring
  • Replaces: 4EB3C1B
  • Solid, sturdy construction
  • Type: Long (2 Spring) tank
  • Decay: long decay
  • Input: 600 Ω
  • Output: 2,250 Ω
  • Connectors: Input insulated/output grounded
  • Locking: No lock
  • Mounting: Horizontal/open side down

Compatible amps include Fender® Hot Rod Deville, Hot Rod Deluxe, Blues Deluxe (reissue only), Blues Deville (reissue only). Replaces Fender® Part Number 0050394000. Also, fits Traynor™ YCV50 as well as some Music Man™ and Peavey™ models. Suitable upgrade/ replacement for the Vox™ AC30CC series amp.
"TAD redefines Spring Reverberation. When the manufacturing of Accutronics Reverb cans in the USA has been announced to close down in 2008 TAD started the research for an own high quality production of the classic spring reverberation units. The goal was to create a drop-in replacement bringing back that stunning reverb sound that Fender made so popular since the early 1960s.
The TAD Reverb Cans achieve this goal and even more: deep and smooth reverb, no fluttering but wide frequency response with airy top end instantly inspiring to enjoy guitar playing. The rock solid mechanical design assures a very dependable and consistent quality performance exceeding any expectation. A drop-in replacement and upgrade as well for vintage as for modern reverb cans by size, performance and tone."
-Tube Amp Doctor
Questions about reverb tanks? See our tech articles for more information.
Please Log In to view prices
Reverb Tank - Tube Amp Doctor, 8EB2C1B, Medium Decay, 3-Spring
  • Replaces: 8EB2C1B
  • Solid, sturdy construction
  • Type: Short (3 Spring) tank
  • Decay: medium decay
  • Input: 800 Ω
  • Output: 2,575 Ω
  • Connectors: Input insulated/output grounded
  • Locking: No lock
  • Mounting: Horizontal/open side down


Compatible amps include Fender® Blues Jr., Deluxe 90, Princeton 65, Stage Series, Acoustasonic Junior, Vaporizer, Ultimate Chorus, Ultra Chorus, Sidekick Keyboard 60, Sidekick Reverb 35, Super 60, Super 112, Frontman 65R, Eighty-Five, Tech 21® Trademark 30, Epiphone® Valve Junior Hot Rod, Vox® AC15CC, AC15C, Ultra 60/120, Backstage, Valveking, plus others.
"TAD redefines Spring Reverberation. When the manufacturing of Accutronics Reverb cans in the USA has been announced to close down in 2008 TAD started the research for an own high quality production of the classic spring reverberation units. The goal was to create a drop-in replacement bringing back that stunning reverb sound that Fender made so popular since the early 1960s.
The TAD Reverb Cans achieve this goal and even more: deep and smooth reverb, no fluttering but wide frequency response with airy top end instantly inspiring to enjoy guitar playing. The rock solid mechanical design assures a very dependable and consistent quality performance exceeding any expectation. A drop-in replacement and upgrade as well for vintage as for modern reverb cans by size, performance and tone."
-Tube Amp Doctor
Questions about reverb tanks? See our tech articles for more information.
Please Log In to view prices
Terminal Board - two 8 Pin sockets, 2 x 12 lugs
Dual socket. 2 rows/12 lugs per row, 4 mounting holes. Board dimensions 5 ¼" x 3". Terminals are not pre-wired.
Please Log In to view prices
Polish - Lizard Spit, VIP Vintage for Instruments, 4 oz.
Lizard Spit vintage polish for all paint surfaces. Removes: Old wax build-up without causing chemical reactions commonly associated with other products. Produces: Brilliant Shine.
Please Log In to view prices
Tolex - Marshall, Red Elephant, 53.5" Wide
Sold by the yard
Genuine Marshall™ Red Elephant tolex. 53.5" wide. Sold per yard. Product will be in one continuous segment, cut to the ordered length.
Please Log In to view prices
Vacuum Tube - 6CT7 / EAF42, Pentode
Single diode, remote cut-off R.F. pentode.
Please Log In to view prices
Vacuum Tube - 8068, Pentode, Beam
Beam pentode designed for use as a series regulator in high-voltage power supplies.
Please Log In to view prices
Strap locks - Grover, 5-pointed Star style
Package of 2
Colors Available:
These new buttons offer players the opportunity to attach their strap with style. They keep the players' strap locked without the hassles or expense of traditional strap locks. The two-piece screw on design lets the player change styles easily while the oversized die-cast buttons and custom-fitted o-rings safely secure the strap. All hardware is provided and the installation process is simple. Replaces original strap button with no modification or damage to the instrument.
Please Log In to view prices
Nut - Gold Tone, Zero Glide Blank (Unslotted)
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Intonation Large pitch deviation in early frets. (See intonation graph below) Minimal pitch deviation in early frets.
Please Log In to view prices
Vibramate - V5 JAM Mounting, For Jazzmaster and Jaguar
Colors Available:
Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.
Please Log In to view prices
Socket - 4 Pin, Ceramic, Bayonet, China
4-pin ceramic bayonet socket used for 300B and 811 tubes.
  • Top mount
  • 2" mounting centers
Please Log In to view prices
Terminal Board - two 9 Pin sockets, for Dynaco Mark III
For Dynaco Mark III. Dual socket, 2 rows/11 lugs per row, 4 mounting holes. Board dimension 4.25" x 3.45". 0.125" thickness.
Please Log In to view prices
Neck Support - 2-Way, for guitar work
2-Way Neck Support for guitars. This natural wood, swing design neck support is great for any guitar shop front counter or repair bench and can be used for inspection or repairs of different sized guitars/basses with ease. No need for separate neck supports when switching between acoustic and electric guitars!
  • 2 way adjustable height is compatible with acoustic and electric guitars/basses
  • Large (15cmx15cm) square base keeps the guitar stable and steady during repair
  • Natural cork used at guitar contact points.
Please Log In to view prices
Vacuum Tube - 8950, Pentode, Power Amplifier
Compactron beam power pentode primarily designed for RF power output applications. Features of the 8950 are dual cathode and grid connections for lower lead inductance, and a 13 volt heater.
Please Log In to view prices
Effects Pedal Kit - MOD® Kits, Tone Attack, Active Tone Stack
Shape your sound with the Tone Attack. 12 o'clock settings give an approximate unity gain with the pedal. Rotate the treble or bass knob counterclockwise to cut the corresponding frequencies. Rotate these same knobs clockwise to boost the frequency bands. The master boost knob can be used to attenuate your signal or push your tone to screaming loud volumes. MOD® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. The Tone Attack operates on a 9V battery or AC adapter, which is not included. The Godlyke 9-volt adapter (M-PAS-S) may be purchased separately to power your new pedal.
Please Log In to view prices
Footswitch Box - Marshall, Two Button w/ LED (Multiple Decals)
Original Marshall two-button LED footswitch with eight decals for various uses. This pedal is hardwired with a TRS plug.
Please Log In to view prices
Amp Cover - Orange, for Amplifier Heads
Orange™ amp head cover. An essential purchase for when flight casing your cab or combo isn’t possible. Protect your Orange rig with a tough and durable vinyl fabric cabinet cover displaying the Orange logo. Versions available for:
  • CR120H
  • Large Amp Heads (Thunderverb / Rockerverb / AD200)
  • Small Amp Heads (AD30HTC / Custom / RK30H)
Please Log In to view prices
Choke - One Electron, Audio, PRC-2, for Shunt Feed SE Output
The PRC-2 audio choke from One Electron was designed for shunt-feed single-ended output applications, but is also useful where quality inductive loads are needed or as high-quality filter chokes.
Please Log In to view prices
Attenuator - Recycled Sound, Power Plug 100, -10 dB to -30dB
The Power Plug 100 offers the same -10db as the Power Plug Lite (M-PPLITE) but adds another "Bedroom Level" pot for further attenuation of up to -30dB AND is suitable for amps up to 100 watts! Turn your tube amp UP to drive your power tubes. This is where tube amps blossom and where players get in trouble. Use the attenuator to drop your overall volume to more tolerable levels. You can dial in your breakup, which may be too loud, then attenuate to lower the overall volume. So you can adjust your amp as usual and use the attenuator as an overall Master volume.
Please Log In to view prices