Clearance Items

T-Shirt - Black, Tube Amp Doctor, 25 Years
Black t-shirt from Tube Amp Doctor celebrating their 25th anniversary. Printed on a 100% cotton Fruit of the Loom shirt.
Please Log In to view prices
Speaker - Jensen Punch Bass, 15", BP15/250, 250W, 8Ω
The Punch BP 15/250 is a 15" ferrite speaker with 250 watts of power. Punch Sound speakers offer great dynamics and super-fast response, giving the player an extremely solid bass sound. Equipped with ferrite magnets and steel baskets, they are ideal for classic styles where a clean, tight and bright sound is required.
The 15'' bass speaker provides a full and warm low-end that will fill the room.
Please Log In to view prices
Speaker - Jensen® D-Series, 12", C12D, 150W
The C12D is able to return the powerful, organic, warm tone and character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar.
Please Log In to view prices
Speaker - Jensen® MOD®, 15", MOD15-120, 120W
The Mod 15-120 is a 15" ferrite speaker with 120 watts of power. Full bodied bass speaker with enough highs for both organs and "heavy" guitar players. The MOD15-120 has a full, boomy low-end focus with subtle highs and responds to overdrive distortion with a gritty edge
Please Log In to view prices
Transformer - Fender® Replacement, Output, 50 W, 4 Ohm
Replacement for Bassman heads. Equivalent to #125A13A & #022871.
Please Log In to view prices
Transformer - One Electron, Output, 1600 Ω to 16/8/4 Ω
The UBT-1 from One Electron is a low-impedance single-ended output transformer intended for parallel combinations of tubes running a B+ voltages of 250 to 325 volts, such as: two or three EL34s (triode connected), three 2A3s, two 300Bs, two 6AS7s, etc., as well as single sweep tubes run in 'enhanced-triode' mode, resulting in 10 to 15 watts of output power.
Please Log In to view prices
Shirt - Black with MOD® Kits DIY Pedal
MOD® Kits DIY project guts graphic screen printed in white. Printed on the front of a black t-shirt.
Please Log In to view prices
Speaker - Jensen® D-Series, 12", N12D, 150W
The N12D is able to return the feel, the warmth and the character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar. The Neodymium magnet design allows a weight reduction to only 2.4kgs.
Please Log In to view prices
Speaker - Jensen® Vintage Alnico, 15", P15N, 50W
One of the first speakers ever used in a guitar amplifier, the P15N was loaded in the earliest Fender Bassman® and Bandmaster® amps, setting the milestone for those classic tones. The P15N delivers a warm, full bodied tone, with deep basses, and a nice, extended top end. Excellent for all different shades of clean and pushed clean tones.
Please Log In to view prices
Reverb Tank - Tube Amp Doctor, 9AB2C1B, Medium Decay, 3-Spring
  • Replaces: 9AB2C1B
  • Solid, sturdy construction
  • Type: Long (3 Spring) tank
  • Decay: medium decay
  • Input: 10 Ω
  • Output: 2,575 Ω
  • Connectors: Input insulated/output grounded
  • Locking: No lock
  • Mounting: Horizontal/open side down


Compatible amps include select Fender® models, plus others.
"TAD redefines Spring Reverberation. When the manufacturing of Accutronics Reverb cans in the USA has been announced to close down in 2008 TAD started the research for an own high quality production of the classic spring reverberation units. The goal was to create a drop-in replacement bringing back that stunning reverb sound that Fender made so popular since the early 1960s.
The TAD Reverb Cans achieve this goal and even more: deep and smooth reverb, no fluttering but wide frequency response with airy top end instantly inspiring to enjoy guitar playing. The rock solid mechanical design assures a very dependable and consistent quality performance exceeding any expectation. A drop-in replacement and upgrade as well for vintage as for modern reverb cans by size, performance and tone."
-Tube Amp Doctor
Questions about reverb tanks? See our tech articles for more information.
Please Log In to view prices
Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
Please Log In to view prices
Generator - Lodestar, RF Signal generator
Compact solid state RF signal generator designed for the hobbyist, service bench and technical instruction. The generator is most suited for checking and aligning the IF circuit and tuners in AM, FM, and TVs. 100 kHz to 150 MHz in 6 bands and up to 450 MHz on third harmonics.
Features:
  • Wide frequency range- 100 Khz to 150 MHz
  • With 1 KHz oscillator purpose of modulation
  • High Stability
  • Output control- 0dB/-20dB/-40dB and fine adjuster
  • Frequency accuracy + or - 5%
  • RF output- 100mV rms appx. (up to 35MHz unloaded)
  • Output control- High-low switch, fine adjust
  • Audio output 1 KHz min., 2V rms
  • Modulation: Internal: 1 KHz (AM) 30% appx., External: 50 Hz ~ 20 KHz at <1V rms input
Please Log In to view prices
Vacuum Tube - 6CN7, Dual Diode, Triode
Duplex-diode high-mu triode in which separate cathodes are provided for the diode and triode sections. The tube is primarily intended for service as a combined horizontal phase detector and reactance tube in television receivers.
Please Log In to view prices
Effects Pedal - TWA, Flyboys FB-03, Echo
The TWA Flyboys FB-03 is a massive sounding delay pedal in a tiny package. This pedal takes you from the snappiest slapback sounds to big spacious delays with over 600 milliseconds of delay time. The bright and articulate delay signal keeps the mix crisp and transparent while the repeats add a touch of modulation for a warm tape like sound as the signal decays. The FB-03 Echo can go from one repeat to infinite repeats putting the pedal into self oscillation for wild feedback effects. The FB-03 Echo also features a true bypass footswitch and comes with a DC jack to battery clip converter cable.
  • 9VDC 2.5mm Barrel Connector
  • 42mA maximum current draw
  • True bypass switching
  • 20 – 620 ms delay time
  • Self oscillating
  • Extruded aluminum chassis
  • Quality components
  • 1.75” x 3.75” footprint
Please Log In to view prices
Potentiometer - Dunlop, 20 kΩ, Custom Taper, Wah Pot, for Bass
Custom taper 20k Dunlop potentiometer used in 105Q Crybaby Bass Wah. 1 million cycles, maintenance free.
Please Log In to view prices
Switch - Korg, Momentary Tactile Switch, Medium Length Actuator
Genuine Korg momentary switch used in many Korg products.such as the O5R/W, A1, i30, i30HD, OASYS, Trinity, Triton, Triton EX, Triton Studio, and X5DR.
Please Log In to view prices
Potentiometer - PEC Guitar, Audio, Split Shaft
Precision Electronic Components (PEC) Potentiometers are very high quality replacement and upgrade components. Hot molded Carbon element, gold-plated terminals, 24mm potentiometer with stainless steel split knurled shaft and one piece brass housing. Mechanical rotation: 300°, ¼" shaft diameter, 3/8" bushing diameter, 3/8" shaft length, ¼" bushing length. 1 watt.
Includes 1 nut and 1 lock washer.
Please Log In to view prices
Vacuum Tube - 12JT6A, Beam Power Amplifier
The 12JT6A is the same as the 6JT6A except for heater characteristics and ratings.
Please Log In to view prices
Vacuum Tube - 6SH7GT, Pentode, Sharp Cut-Off, RF
Triple grid sharp cut-off amplifier. It is designed for service in high gain RF and IF amplifier applications and for limited service in FM receivers. The double cathode connection is useful in reducing cathode circuit coupling.
Please Log In to view prices
Speaker - Jensen Smooth Bass, 8", BS8N250A, 250W, 8Ω
The Smooth BS 8N/250A is a 8" neodymium speaker with 250 watts of power. Smooth Sound speakers are extremely clean and round with superb headroom. Equipped with neodymium magnets and aluminium baskets, they offer great linear excursion and dynamics.
They are ideal for modern styles where extended low end is required. Neodymium magnets offer a 50% reduction in weight guaranteeing very light systems. The proprietary aluminium basket was specially designed to avoid sound wave reflections on the rear side of the cone, thereby allowing for faster and better cooling of both the voice coil and the air moved by it.
The 8'' bass speaker provides a tight bass tone with crisp mids. The tone is very clear overall.
Please Log In to view prices
Strap locks - Grover, Eagle, Chrome
Package of 2
These new buttons offer players the opportunity to attach their strap with style. They keep the players' strap locked without the hassles or expense of traditional strap locks. The two-piece screw on design lets the player change styles easily while the oversized die-cast buttons and custom-fitted o-rings safely secure the strap. All hardware is provided and the installation process is simple. Replaces original strap button with no modification or damage to the instrument.
Please Log In to view prices
Cable - Grover, Speaker, Nickel Plugs
Equipped with a ¼" nickel plated straight phone plug. Specifically designed cables prevent shocks and allows for minimum hum or noise providing 100% signal.
Please Log In to view prices
Drill Bit - two step, for installing vintage tuners
Two-step drill bit for drilling two-step holes. HSS material. Can be used to install vintage type tuners.
Please Log In to view prices
Vacuum Tube - 6BY7 / EF85, Pentode
R.F. pentode with variable transconductance for use as wide-band amplifier.
Please Log In to view prices