Clearance Items

Designed for use on thin hollow body and semi-hollowbody guitars Bigsby B50 Specifications

• Model Name: B-50
• Series: Licensed Line
• Manufacturing Method: Die Cast
• Manufacturing Material: Aluminum
• Approximate weight: 290 grams/10.2 oz.
• Overall Length: 4 5/16" / 109.5 mm
• Overall Width: 3 13/16" /96.8 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Original Celestion Guitar Speaker Recone Kit. For 12" Celestion G12 Alnico Blue (our SKU's P-A-G12-8 and P-A-G12-15)

This McNelly Stagger Swagger pickup features a nickel plated cover, a braided-shield/single-conductor wire, and a 1 15/16" string spacing.

The N12D is able to return the feel, the warmth and the character of a classic guitar amplifier, but also the treble content and the complex harmonics of the overdrive, modulation, delay and reverb effects, as well as the crisp, natural tone of an amplified acoustic guitar. The Neodymium magnet design allows a weight reduction to only 2.4kgs.

• Primary: Universal - 100, 110, 120, 200, 220,230, 240 VAC 50/60 Hz.
  
  • NOTE: units are designed to operate with BOTH primary windings engaged.
  • See primary wiring information under resources.
• Bias Tap: 50 VAC tap from high voltage secondary C.T. (except part number P-T379WX - uses a separate 60VAC 0.2 Amp winding).
• Highpot tested: 2,000 VAC
• Faraday Copper Primary Shield: Our electrostatic shield reduces the capacitive coupling from the primary - greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell).
• Windings: Concentric wound for low stray field and low noise.
• Models: This series is an upgrade from our P-T263-X range of units PLUS 2 models designed specifically for 300B tubes (Part Number P-T300BX) and 2A3 tubes (Part Number P-T302AX).
• Finish: Black powder paint to match our P-T1650X series of output transformers Units can be run full wave bridge or full wave C.T.
• Conservative designs - CSA certified (209651).

A worthy successor to the Vintage 10, the G10 Vintage is a 10" speaker with bags of attitude. Using powerful ceramic magnets and the same voice coil design as the Vintage 30, the G10 packs an impressive punch with its 60W power handling. With the fast response of a 10" but with the strong and creamy vocal tones of a 12", the G10 is the ideal choice to add depth to hollow-sounding amps, or for players who want to get humbucker-type girth from single-coils. Can be used singly to add vocal warmth to small valve combos, or in quartets for a weightier but still lively attack.

The Raptor is one of the newest Jensen speakers, released after a long time in development refining the ideal qualities of a contemporary, sophisticated, touch responsive speaker. The result is a 100W ceramic speaker with a characteristic, vocal, rounded midrange and a silky-smooth top end, all based on a solid, fat and firm bass foundation. Eminently versatile, the Raptor is equally suitable to clean, crunch and lead tones. Guitarist Description: Powerful, smooth and warm. Excellent definition in the upper midrange. When presented with overdrive distortion, it exhibits a silky, full-sounding lead tone.

• Lows: Fat/Deep
• Mids: Firm/Vocal
• Highs: Subtle/Extended
• Overdrive: Smooth/Crunchy

Have you ever wondered if there is a better way to build a Bassman, Champ, Plexi, an 800, AC-30, Bulldog or Portaflex? Or you wanted to build an SVT with off-the-shelf parts? How about a master-volume amp that doesn't change tone with the master setting? Everything you need to know is right here, including: proper grounding techniques, wiring methods, and mechanical considerations. Eighteen chapters cover the "iconic" amps everyone knows and loves, with schematics and layouts for each, along with the technical history of the product.

The evolution of guitar amp circuits becomes a revolution! The Ultimate Tone, Volume 6 takes you through advanced DC Power Scaling methods; reveals the secrets of Dumble amps; explores the truth about high-gain preamps; demonstrates how to build Z-B-X push-pull power amps with a single power tube; simplifies the design of 400W+ tube amps - methods that can be applied to any power level; presents class-G tube amps where 100W of output has the same waste heat as a 25W amp; explores modern mains control and sustain circuitry.

The 7 string Hipshot Fixed Bridge is the ultimate marriage of performance, beauty and ergonomics. Each bridge base is hand polished before plating for a smooth, comfortable feel under your palm. The stainless steel saddles have a crisp string relief edge, eliminating dull tones and maximizing string vibration. The side walls lock your saddles in place no matter how hard you thrash.

30° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 3" (1” height at front)
• Top panels are 0.064” thick aluminum
• Powder coated top and bottom
• Wood sides are real walnut - each piece has a unique color & grain.
• Solid oiled walnut sides on a black, ventilated steel base.
• Comes with self adhesive rubber feet and required mounting hardware.

A smaller version of the regular size ROTO-GRIP® lockers for the in line and smaller headstocks or for those who prefer a lighter feel.

Every part of your system contributes to your Ultimate Tone, so every part is important. The Ultimate Tone, Volume 5 delineates, in clear language, the function of each electronic component in a circuit, and how alterations to the value of each part affect the final sound. Gain stage voicing, interstage attenuator optimization, sustain restoration for clean and distorted tones, power amp and preamp "tone generators", simple boost pedals, amp selectors and power conditioners are all covered, with designs using off-the-shelf parts. Like TUT3, this is a "project book" presenting design challenges and solutions, with a diversity of tube and solid-state circuits for bass, guitar and keyboards.

Triode, Double, Western Electric brand

Sovtek 6A3 power triode tube. Made in Russia.

Retrofits guitars equipped with Schaller® M6 Mini tuning machines. Take your music to a new low with the closed gear Xtender. With the flip of a lever, your low E string can go down to D, C or even B (depending on your string gauge).

• Primary 115 VAC, 60 Hz.
• Secondary 60 C.T.
• All secondaries center tapped, VAC (RMS)
• Enclosed, 4 hole chassis mount.
• Minimum 6" long leads.
• Dual bobbin design - no electrostatic shield required.
• Class B insulation (130 degrees C).
• Hi-Pot test of 2,000V RMS.
• UL listed (# E50394) & CSA certified (209651).

Vibramate V5-TEV Stage II with FilterTron - TV Jones Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Vibramate V5-TEV Stage II with Shorty Ash-Tray Bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

Vibramate V5-TEV Stage II with Humbucker Ash-Tray bridge option. Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.

The 505FV series design allows you to upgrade your vintage Fender® tuners to a more modern style locking tuner without making ANY modifications to your guitar. The overlapping ear design allows you to utilize the existing screw holes and the use of push in bushings, rather than screw in, means no modifications have to be made to the post holes. These inline tuners feature the famous 18:1 ratio and thumb screw locking mechanism.

• Vertical Mount. For Horizontal Mount, see P-T263-Z
• Primary 115 VAC, 60 Hz. - except as noted
• Enclosed, 4 hole, chassis mount.
• Minimum 6" long leads.
• Units can be run full wave bridge or full wave C.T.
• Class A insulation (105 degrees C).
• Hi-Pot test of 2,000V RMS.
• Conservative designs - CSA certified (209651).

This model offers the same specs and styling as the Original “Milk Bottle" style 102 Series, but with Pearloid Buttons and button retainer. 18:1 ratio.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Threaded thumbwheel style studs and anchor bushings. Hardware included.