Clearance Items

New Old Stock (NOS)

Our new-old-stock tubes were made by the major U.S. manufacturers, along with a small number of European manufacturers and are tested and guaranteed.
Vacuum Tube - 6K7G, Pentode, Remote Cut-Off, RF
The 6K7G is an indirectly heated pentode of the vari-mu (remote cut-off) type for use in the RF or IF stages of radio equipment.
Please Log In to view prices
Please Log In to view prices
Vacuum Tube - 5726 / 6AL5W, Dual Diode
Twin diode miniature type intended for applications where dependable performance under shock and vibration is paramount. The 5726 is a "premium" version of the 6AL5W
Please Log In to view prices
Vacuum Tube - 6J6A / ECC91, Dual Triode, Medium MU
Twin triode in the 7 pin miniature construction. It can be operated in parallel or push-pull.
Please Log In to view prices
Vacuum Tube - 6AG5 / EF96, Pentode
Miniature type RF pentode having a sharp cut-off characteristic and a high value of transconductance. In compact, light-weight equipment it is useful as an RF amplifier up to about 400 megacycles.
Please Log In to view prices
Vacuum Tube - 6AS5, Tetrode, Beam Power
Miniature beam pentode designed primarily for use in the audio-frequency power output stage of automobile receivers. The tube is capable of delivering a relatively high power output at low plate and screen voltages.
Please Log In to view prices
Vacuum Tube - 6BK7-A-B, Dual Triode, HF
Miniature twin triode designed primarily for use as a cascode amplifier at frequencies below approximately 300 megacycles.
Please Log In to view prices
Vacuum Tube - 6HA5 / 6HM5, Triode, HI MU
Miniature triode designed particularly for service in VHF television tuners as a grounded-cathode RF amplifier.
Please Log In to view prices
Vacuum Tube - 5840 / 6225, Pentode, Sharp Cut-Off
The premium subminiature type 5840 is a sharp cutoff pentode characterized by long life and stable performance under conditions of severe shock, vibration, high temperature and high altitude
Please Log In to view prices
Vacuum Tube - 6CS6 / EH90, Heptode
Miniature dual control pentagrid tube intended for use in sync separator circuits. In these circuits it provides improved noise immunity. Both control grids have sharp cut-off characteristics.
Please Log In to view prices
Vacuum Tube - 6688 / E180F, Philips, Pentode, RF, Gold Pin
Special quality pentode designed for use as wide band amplifier.
Please Log In to view prices
Vacuum Tube - 6BJ7, Triple Diode
Miniature, triple diode primarily intended for use as a d-c restorer in each of the three signal channels of color television receivers. For flexibility in circuit design, each diode incorporates a separate cathode
Please Log In to view prices
Vacuum Tube - 6BN4A, Triode, HF
Miniature medium-mu triode designed for as a radio-frequency amplifier in a VHF television tuner.
Please Log In to view prices
Vacuum Tube - 6BN6 / 6KS6, Discriminator, Gated Beam
Heater-cathode type beam tube of miniature construction designed primarily to form the combined operations of the limiter, discriminator, and audio-voltage amplifier in FM and intercarrier television receivers.
Please Log In to view prices
Vacuum Tube - 6BS8, Dual Triode
Miniature, medium-mu twin triode designed for use as a VHF cascode amplifier. In this application, section two (pins 1, 2, and 3) is intended for the input section.
Please Log In to view prices
Vacuum Tube - 5763, Tetrode, Beam Power
Heater-cathode type transmitting beam power amplifier in the 9 pin miniature construction. It is intended for use in compact, low-power mobile transmitters and in the low-power stages of larger fixed station transmitters.
Please Log In to view prices
Vacuum Tube - 3Q4, Pentode, Power
The type 3Q4 is a miniature type power-amplifier pentode designed for use in the output stage of battery operated equipment.
Please Log In to view prices
Vacuum Tube - 5755 / 420A, Dual Triode
The 420A electron tube is a double-triode having separate indirectly heated cathodes. The heater is center-tapped to permit operation from a 6.3 or 12.6 volt filament supply.
Please Log In to view prices
Vacuum Tube - 6BY6, Heptode
Miniature dual-control heptode designed primarily for use as a combined sync separator and sync clipper in television receivers. Each of the two independent control grids exhibits a sharp cutoff characteristic.
Please Log In to view prices
Vacuum Tube - 6AB7 / 1853, Pentode, Remote Cut-Off, RF
High transconductance semi-remote cut-off amplifier tube designed for television RF and IF amplifier service. Precautions should be taken not to exceed dissipation rating with expected line-voltage fluctuations, especially with fixed-bias operation.
Please Log In to view prices
Vacuum Tube - 6JT6A, Beam Power Amplifier
Beam power tube for horizontal-deflection-amplifier service in black-and-white TV receivers.
Please Log In to view prices
Vacuum Tube - 6AU4GTA, Diode, Damper
Single heater-cathode type diode intended for service as the damping diode in the horizontal-deflection circuit of television receivers. High output current capabilities make the tube particularly well suited for autotransformer deflection systems
Please Log In to view prices
Vacuum Tube - 6CT7 / EAF42, Pentode
Single diode, remote cut-off R.F. pentode.
Please Log In to view prices
Vacuum Tube - 32, Tetrode
Sharp cut-off tetrode designed for use as a radio-frequency or intermediate-frequency amplifier or as a detector tube in battery operated receivers.
Please Log In to view prices