Clearance Items

Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
Chassis box perfectly suited for effects pedals and other DIY projects.
Please Log In to view prices
Patch Cables - 3.5mm, Mono
Colors Available:
Low cost, high quality 3.5mm patch cables in a variety of lengths and colors. The cables are super flexible, have a great droop, and are shipped coiled so no permanent kinks are formed. With the large selection of lengths and colors, these cables are the perfect choice for any sized system.
Please Log In to view prices
Bridge - Gotoh, Tune-O-Matic, Standard Post
Colors Available:
Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.
Please Log In to view prices
Tailpiece - Gotoh, Height Adjustable
Colors Available:
This zinc diecast height adjustable stop tailpiece from GOTOH features threaded adjustable studs and knurled bushings. Hardware included. Anchor bushings: M8x1.25, 25mm height.
Please Log In to view prices
Potentiometer - Precision Electronics, Audio, Slotted Shaft
Audio, 28mm potentiometer with slotted solid shaft, made by Precision Electronics. 10% tolerance. 2 watts.
Please Log In to view prices
Nut Files - Double Edge, for guitars, 3 sizes
Package of 3
Double edge nut files featuring popular guitar gauges specially designed for slotting nuts. Each set of files is specifically designed for guitars of a particular type. This set of three files will cover the work of six and cuts a smooth round bottom slot. Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.
  • 4” cutting edge
  • Set of 3 files
  • Made In Japan
Please Log In to view prices
Coil - Miniature adjustable coil, 70, oscillator
Coil is similar to Miller number 70-OSC oscillator coil. Their small physical size and the fact that they can be adjusted to the inductance required make these coils ideally suited for replacement in broadcast band receivers. The 70 Oscillator coil has a primary and a tapped secondary. These coils are for use in all common padded and unpadded oscillator circuits.
Please Log In to view prices
Capacitor - Peavey, 55V, 4700µF, Axial Lead
Peavey 4700 µF @ 55V polarized electrolytic capacitor with axial leads. 7/8" diameter x 2" length.
Please Log In to view prices
XLR Plug - Amphenol, Machined Contacts
Colors Available:
XLR 3 pole male, machined contacts, jaws cable clamp. Features:
  • Zinc Diecast Shell
  • Solder Bucket connections
  • "Jaws" Cable Retention System
  • Leading first mate last break socket contact
  • Quick and easy assembly without screws
  • Precision machined contacts
Please Log In to view prices
Vacuum Tube - 6S4A, Triode, Medium MU
Miniature medium-mu triode for use as the vertical-deflection amplifier in television receivers. The tube features relatively high plate current at low plate voltages
Please Log In to view prices
Soldering Iron Tip - Weller, screwdriver type, ST Series
Genuine Weller screw driver (chisel) style tips for use with all ST Series compatible soldering irons. The screwdriver style is great for soldering through hole components and many other situations. The flatted tip makes it easy to make contact with both the solder pad and component lead. These tips are an excellent choice for use with the S-TWLC100 soldering station.
For use with Weller Irons: SP40N, WP25, WP30, and WP35; and WLC100 station
Please Log In to view prices
Bridge Rectifier - Single-phase, 2A, In-line
2A bridge rectifier in an inline package ideal for PCB use. Features:
  • Low reverse leakage
  • Low forward voltage
  • High forward surge current capability
Please Log In to view prices
Cord - Power, for United Kingdom plugs, 8 feet
Detachable 3 conductor power cord for United Kingdom wall outlets. Cord end is IEC connected. GTSA-3 (Marshall™ type) 18 AWG. 2-1/2 meters (about 8 feet) length, 1/4” outer diameter.
Please Log In to view prices
Vacuum Tube - 6J6A / ECC91, Dual Triode, Medium MU
Twin triode in the 7 pin miniature construction. It can be operated in parallel or push-pull.
Please Log In to view prices
Transformer - Fender® Replacement, Output, 50 W, 4 Ohm
Replacement for Bassman heads. Equivalent to #125A13A & #022871.
Please Log In to view prices
XLR Jack - Amphenol, 3-Pole, Female, D Flange
Colors Available:
Amphenol AC "Z" series XLR metal chassis mount connector. 3 pole female, D Flange, machined, black finish. The metal chassis mount "Z" series connectors are designed for the audio user where durability, reliability and strength across a wide range of applications are important. All AC products are manufactured to the highest quality standards and will withstand the harshest environments. Features
  • The “D” size housing can be either front or rear mounted using the same panel cutout
  • A leading first mate last break socket contact is standard on all female connectors (Pin 1)
  • Solder cup
  • Connectors are fitted with a grounding system for RFI shielding applications
  • Compatible with all other XLR brands

Note: A ground tag is standard on all AC "Z" series connectors.
Please Log In to view prices
Terminal Strip - Kulka, 599 Series, Barrier Strip, 7 Pole
High quality seven pole barrier strips made by Kulka / Marathon. These terminal blocks have a solid phenolic base with plated brass terminals and combination head screws. Features:
  • Base, Phenolic, 150° C
  • Open Back Design (Insulator Strip Required for Voltage Rating)
  • Screws, #5-40 Binder Head, Phil-Slot
  • Terminals, Plated Brass
  • 7 Poles
  • 3/8” Centers
  • Wire Range With Wire Binding Screw #16-#22 AWG – 15 Amps
  • UL Recognized File No. E47811
  • CSA Certified File No. LR19766
Please Log In to view prices
Tube Base - 4 pin, ceramic, 1.25" diameter
4 pin, ceramic tubes base, 1 ¼" diameter - 1 1/16" tall.
Please Log In to view prices
Vacuum Tube - 0B3 / VR90, Voltage Regulator
The 0B3 is a two-element gas-filled, cold cathode voltage regulator. It is designed to provide regulated outputs of approximately 90 volts.
Please Log In to view prices
¼" Plug - Amphenol, Right Angle, Mono, Gold Contacts
2-pole 1/4" professional right-angle phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.
Please Log In to view prices
Pickguard - Fender®, for American Stratocaster, 11-hole
Colors Available:
Fits most American and Mexican stratocasters. 3 ply standard 11 hole pickguard. Fits 3 single coil pickukps.
Please Log In to view prices
Vacuum Tube - 6Y6GT, Beam Power Amplifier
Beam power pentode primarily intended for use as an audio frequency power amplifier. It is particularly useful in applications where the available supply voltage is relatively low.
Please Log In to view prices
¼" Plug - Amphenol, Mono, Phone, Gold
Amphenol "Musician Series II" Phone Plug. 1/4" Mono straight plug with diecast shell, black finish, gold plated contacts and flexible grommet cable protection. Internal cable clamp fits cable outer diameters ranging from 0.256" to 0.315" (6.5 mm to 8 mm).
Please Log In to view prices
¼" Plug - Amphenol, mono, Satin Finish
1/4" Mono phone plug, diecast shell, satin finish, flexible grommet. Features:
  • Stylised Shell design
  • Robust diecast shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • Flexible grommet cable protection
  • Quick and easy assembly
  • Large cable O.D. Entry to 8mm (0.315”)
Please Log In to view prices