You are here

Circuit Design

Filter these results
Sort By:
products per page
View Mode: List View · Grid View
S-Z370Analog Multimeter - Volt-Ohm-Millimeter
Intermagnetic version to prevent interference from magnetic fields. Double protection of diode and fuse, transistor hFE test function. DCV: 0.25V, 0.5V, 2.5V, 10V, 50V, 250V 1000V. ACV: 10V, 50V, 250V, 500V,1000V. DCA: 50 uA, 2.5 mA, 25mA, 250mA. Ohms: x1, x10, x1k, x10k. Dimensions: 148mm x 98mm x 41mm
Please Log In to
view prices
Click to read more
S-TPTA8Soldering iron tip - Weller, screwdriver, for WTCPT, 800F
Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWTCP
  • PT Series Screwdriver Tip for TC201 Series Iron
  • Solid copper, plated with iron all over
  • Designed to provide maximum heat transfer from the heater to the tip
  • Tinned with lead-free solder
  • Use only genuine Weller tips
Please Log In to
view prices
Click to read more
S-T9005Solder - Kester 63/37, 1 lb spool, Diameter: 0.031"

(63/37 Rosin Core) - ..031" Diameter, 1 lb Spool, contains lead alloy. Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades. An outstanding performance feature of this flux is the “instant-action” wetting behavior.


Please Log In to
view prices
Click to read more
S-Z3220Digital Multimeter - YF-3220

Ergonomically designed. Uses one 9V battery, included.



  • 0.5% basic DC accuracy
  • audible continuity test
  • 3 1/2 digit LCD, 0.625" high
  • 10M ohm input resistance
  • 1.5" x 3" x 7.5"(w/o rubber case)
  • overload protection
  • voltage to 1000VDC, 750VAC
  • capacitance to 20 microfarads
  • polarity indicator
  • frequency to 10MHz
  • over range indicator
  • 10A (AC or DC)
  • low battery indicator
  • hFE and diode test
  • tilt stand and case
  • 1.6 lbs.

Please Log In to
view prices
Click to read more
S-T7805Bulb solder-off - Weller
Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning.
Begin by squeezing, then hold over the solder to be removed and release the bulb to allow the solder to be sucked into the bulb. This method of solder removal is very basic and inexpensive. The bulb takes up very little space in your tool kit. Made in Taiwan.
Please Log In to
view prices
Click to read more
P-HTAG-40Tagboard - 40 Turret Pins, High Quality
200mm x 45mm, 2 x 20 turrets.
Please Log In to
view prices
Click to read more
S-TSP40LSoldering Iron - Weller, Marksman, 40 watts
  • Weller Consumer Soldering Irons with 3 LEDs
  • Three LED lights for limited application shadowing
  • Round Co-molded soft grip handle design for easy tip positioning
  • Triangular handle area for maximum tip control
  • Stainless steel heater construction
  • Excellent quality consumer iron
  • Input Voltage: 120
  • Power Consumption: 40 watts
  • Tip Temperature: 900ºF
  • Heating Element Type: Nichrome Wound
  • Fiberglass and ceramic insulated

Please Log In to
view prices
Click to read more
P-HTAG-16Tagboard - 300mm x 16mm, 26 Tags
300mm x 16mm, 26 tags.
Please Log In to
view prices
Click to read more
S-TWES51Solder Station - Weller, WES51, analog
The Weller WES51 Analog Soldering Station, with included soldering pencil, stand, and sponge, is the perfect choice for a variety of soldering applications, including industrial manufacturing, rework, repairs, and more. The comfortable foam-grip pencil and variable temperature controls give you complete command of your work for precise results. Plus, with a non-burnable silicone rubber cord, ESD safety, and automatic shut-off technology, the WES51 is safe enough to use in a continuous production environment.
Please Log In to
view prices
Click to read more
S-TWP35Soldering iron - Weller, WP35, controlled output
  • Input Voltage: 120
  • Power Consumption: 35 watts
  • Tip Temperature: 850ºF
  • Heating Element Type: Nichrome wound, fiberglass and ceramic insulated
  • Lightweight handle with cushion grip for ease of use and comfort
  • Comes with 1/8" screwdriver tip
  • Stand (S-TPH60) sold separately
  • Three wire grounded power cord for your safety
  • UL listed
Stand sold separately (S-TPH60)
Please Log In to
view prices
Click to read more
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Circuit Design