Circuit Design

Genuine Weller long screw driver (chisel) style tips for use with all ET Series compatible soldering irons. The long screwdriver style is great in situations where additional length is required or for narrow places. These tips are an excellent choice for use with the S-TWE1010 soldering station.

Genuine Weller single flat style tips for use with all ET Series compatible soldering irons. The single flat style is versatile tip style that works great in situation where precision is required as well as situations where heat needs to be spread efficiently. These tips are an excellent choice for use with the S-TWE1010 soldering station.

• Sensor hole in the base of tip is fitted with a stainless steel liner
• Prevents the tip from seizing to the sensor

9V battery clip with a fiberboard frame. This high quality battery snap features tinned brass eyelets that secure the nickel-plated steel contacts to the fiberboard. Wires can be soldered directly to the eyelets allowing for custom length battery connections. This fiberboard style is similar to the 9V battery connectors in vintage electronics such as the Arbiter Fuzz Face.

300mm x 56mm tagboard with two rows of 28 tags. Each connector features two lugs, one facing inward and one facing outward. This can be helpful when connecting components using the inner lugs which leaves the outside lugs open for wiring. A center row of holes can be used for running wires beneath the board as well as for standoffs.

Stripboard featuring a 0.15” vintage spacing. This spacing is great for vintage-style builds and more easily accommodates axial capacitors and other larger sized vintage parts like resistors and transistors. The board has a 20x10 grid (10 strips) and easily fits into 1590BB style enclosures and larger vintage-style fuzz enclosures. Each strip is HASL coated making soldering easier than most protoboards and also ensures a long shelf life. Features:

• High-quality 1.6mm FR4 glass-epoxy circuit board
• 1oz/ft2 copper weight
• HASL coated strips
• 20 x 10 holes (10 strips)
• 3.04” x 1.55”

Prototyping circuit board with a standard long strip pattern where tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads and the board has 0.1" hole spacing for DIP integrated circuits/ headers as well as other parts. Higher quality than traditional stripboard, the holes are drilled, not punched.

Genuine Weller single flat style tips for use with all ST Series compatible soldering irons. The single flat style is versatile tip style that works great in situation where precision is required as well as situations where heat needs to be spread efficiently. These tips are an excellent choice for use with the S-TWLC100 soldering station.
For use with Weller Irons: SP40N, WP25, WP30, and WP35; and WLC100 station

Genuine Weller narrow screw driver (chisel) style tips for use with all ET Series compatible soldering irons. The narrow screwdriver style is great for soldering in hard to reach and narrow spots. These tips are an excellent choice for use with the S-TWE1010 soldering station.

• Sensor hole in the base of tip is fitted with a stainless steel liner
• Prevents the tip from seizing to the sensor

High quality Phillips head truss rod wrench. This Japanese made wrench is the perfect tool for cross slotted truss rod nuts found on many Fender® necks. The compact 9mm diameter head has a thin 11mm width allowing for adjustments without removing the neck

Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10

Stripboard featuring standard 0.1” (2.54mm) spacing. The board has a 30x15 grid (15 strips) and easily fits into 1590BB style enclosures and larger vintage-style fuzz enclosures. Each strip is HASL coated making soldering easier than most protoboards and also ensures a long shelf life. Features:

• High-quality 1.6mm FR4 glass-epoxy circuit board
• 1oz/ft2 copper weight
• HASL coated strips
• 30 x 15 holes (15 strips)
• 3.04” x 1.55”

Prototyping circuit board (PCB) designed to fit the Hammond 1590BB die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590BB enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190). Features:

• Single-sided high-quality FR4 glass-epoxy circuit board.
• Convenient 2-hole pattern provides an easy way to connect parts.
• 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
• 0.042" holes are drilled on 0.1" (2.54mm) centers. 4 mounting holes.
• PCB Size 3.20 x 4.25 in (81.3 x 108.0 mm)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers. Vertical mount.

Variety pack, 10 feet for each color. Great for color-coded wiring with smaller quantities. 600V stranded. Strands are tinned individually. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment. 6 Pack (6 colors, 60 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue

​​9 Pack (9 colors, 90 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue
• Orange
• Brown
• Purple

See S-W22 for 50 foot rolls of individual colors.

Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWTCP

• PT Series Screwdriver Tip for TC201 Series Iron
• PTA7 - 1.6mm / 0.063" diameter screwdriver tip
• Solid copper, plated with iron all over
• Designed to provide maximum heat transfer from the heater to the tip
• Tinned with lead-free solder
• Use only genuine Weller tips

Metal frame AA battery holder. This battery holder fits a single AA battery and is a great option for electronics that run on 1.5V. It features two solder lugs for connecting wires to the positive and negative ends. The battery holder in the original FZ-1A fuzz pedals looks nearly identical to this holder.

Eyelets, bag of 10 (mounts in 1/8" hole).

High quality 5 pole dual barrier strip. These terminal blocks have a solid PBT base with plated brass terminals and combination head screws. Features:

• PBT Base
• Closed Back Design
• Combo Phil-Slot Nickel-plated Steel Screws
• Plated Brass Terminals
• 5 Poles
• 10 Lugs
• 57.2mm Mounting Centers
• UL 94V-0

Prototyping circuit board that has a general purpose pad-per-hole pattern making it great for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be easily soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. An anti-tarnish coating protects the copper for a long shelf-life and provides easy soldering.
For fastening your project to a surface see our adhesive standoffs (S-H190)
Features:

• Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
• Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
• 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
• 31 x 19 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
• Size 1 = 1.97 x 3.15in (50 x 80mm), 1/16" thick (1.6mm)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.

Variety pack, 10 feet for each color. Great for color-coded wiring with smaller quantities. 600V rating. Tinned copper. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment. 6 Pack (6 colors, 60 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue

​​9 Pack (9 colors, 90 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue
• Orange
• Brown
• Purple

See S-W33 for 50 foot rolls of individual colors.

Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.

• ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
• Precision ground copper tips are plated with iron, nickel and chromium
• ST7 - .031" / 0.79 mm diameter Conical tip
• Tinned with Lead Free alloy

Stripboard made with a phenolic substrate. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This stripboard features a 0.15” vintage spacing. This spacing is great for vintage-style builds and more easily accommodates axial capacitors and other larger sized vintage parts like resistors and transistors. The board has a 40 x 20 holes (20 strips). Each strip is surface treated making soldering easier than most protoboards and also ensures a long shelf life. Features: High-quality 1.6mm phenolic circuit board Corrosion resistant, surface treated copper strips 40 x 20 holes (20 strips) 6.14” x 3.15” Looking for projects? See our Wide Stripboard projects in our Pedal Layouts & Build Guides section for ideas.

Turrets for use on boards measuring 3mm thick, such as P-HTUR-189-3BK or P-HTUR-189-3R. For 2mm boards, see S-HTUR-SG-2X
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET