Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - Orange Drop, 100V, Polyester
Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:
  • Non- inductively wound polyester film/foil construction
  • Radial lead
  • 10% tolerance
  • 100v voltage rating
  • Rated for 85°C operation
  • Tinned copper-clad steel leads
Please Log In to view prices
Capacitor - CE Mfg., 525V, 30/30/20 μF
CE Manufacturing USA Made Multi section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/20uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 ⅜"D X 3"H.
Please Log In to view prices
Capacitor - CE Mfg., 475V, 40/20/20/10µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40/20/20/10 capacitors like this can be found in Seeburg HF-R & HF-J jukebox amplifiers.
  • 40/20/20/10uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 ⅜"D X 2 ½"H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
Please Log In to view prices
Capacitor - 160V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%.
Please Log In to view prices
Capacitor - CE Mfg., 60µF@525V, 40@525, 10@450, 25@50
Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50
Please Log In to view prices
Capacitor - CE Mfg., 475V, 20/20/20/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/20uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2"H.

Great replacement for the can capacitor in the Princeton AA964, Princeton AB1270, Princeton Reverb AA1164, Princeton Reverb AA760 and Princeton Reverb AB1270.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
Please Log In to view prices
Capacitor Clamp - 1.5" Diameter, for vertical mounting
Clamp for mounting electrolytic capacitor cans in vertical position. Supplied with #6-32 screw and nut. 1-½" diameter.
Please Log In to view prices
Capacitor - CE Mfg., 525V, 30/30/30/10uF, Electrolytic
CE Manufacturing USA made multi section can capacitor. Reproduced to exact Mallory specs using original Mallory machinery. 30/30/30/10 uF @ 525 VDC, FP / Twist Lock Style. Solder Tabs. -10%, +50% Tolerance, 55°C Temperature Rating. 1-3/8" dia. x 2-1/2" tall. All CE manufactured can capacitors have a two year warranty against manufactured defects.
Please Log In to view prices
Capacitor - CE Mfg., 350V, 80/50/20/20µF, Electrolytic
Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.
Please Log In to view prices
Capacitor - F&T, 450V, Axial Lead Electrolytic
F&T axial lead electrolytic capacitor. Operating temperature range -40°C to 85°C. Made in Germany
Please Log In to view prices
Cap Set - for Early 80s Marshall JCM800 2203, 4103 (100W Master)
Package of 8
Replacement electrolytic capacitor set.
Basic set includes:
  • (6) C-EC50-50-500CE
  • (2) C-ET10-160
Premium set includes:
  • (6) C-EC50-50-500FT (F&T)
  • (2) C-SA10-150 (Sprague Atom)
Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Please Log In to view prices
Capacitor - CE Mfg., 50µF@300V, 30µF@25V x2, 10µF@350V
Multi-section twist lock capacitor, four sections - 50uF @ 300 VDC, 30uF @ 25 VDC, 30uF @ 25 VDC and 10uF @ 350 VDC. Manufactured to Mallory specs on original Mallory machinery.
Please Log In to view prices
Capacitor - JJ Electronics, 500V, Axial Lead Electrolytic
Electrolytic axial capacitor rated at 500 Volts. These capacitors have special features which enable them to excel in music industry applications. Low impedance, Low ESR, Wide frequency range.
  • Operating temperature: -25°C to 70°C
  • Nominal Voltage: 500Vdc
  • Rated Capacitance: 30µF - 100 µF (depending on capacitor)
  • Capacitance tolerance (at 100Hz, 20°C): -10%+30%
  • Dissipation factor (at 100Hz, 20°C): 0.18
  • Leakage current (after 5 minutes application of rated voltage): 0.004 C.U.

1.66" length x 0.99" diameter 1.70" lead length.
Please Log In to view prices
Capacitor - F&T, 500V, Type A, Axial Lead
Operating temperature range -40°C to 85°C. Axial lead electrolytic. Made in Germany. Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
Please Log In to view prices
Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
Please Log In to view prices
Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
Please Log In to view prices
Capacitor - Mallory, 630V, 150s, Axial Lead
  • Tubular metalized polyester film construction
  • ±10% tolerance
  • Axial leads
  • Non-Inductive, Self Healing

Please Note: Color of capacitor may vary from one production run to another.
Please Log In to view prices
Capacitor - CE, 40/40/40/40µF, 525VDC, Electrolytic, PC Mount
  • CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/40/40uF 525VDC.
  • FP / Twist Lock Style. PCB Mount.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1-⅜" Dia. X 3-½" H.
Please Log In to view prices
Capacitor - Illinois, 50V, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation. Tolerance -20%, +50%. Axial leads. Rated for 50V max.
Please Log In to view prices
Capacitor - Solen, 1000V, "Fast", Metalized Polypropylene
Made of the highest quality aluminum metalized polypropylene film available.Made in France.
Please Log In to view prices
Cap Set - for Marshall JCM800 2204, 4010, 4104 (50W Volume)
Package of 5
Replacement electrolytic capacitor set.
Basic set includes:
  • (3) C-EC50-50-500CE
  • (2) C-ET10-160
Premium set includes:
  • (3) C-EC50-50-500FT (F&T)
  • (2) C-SA10-150 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Please Log In to view prices
Capacitor - 500V, 50/50μF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR.
Please Log In to view prices
Capacitor - CE Mfg., 475V, 30/30/30/30µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - 30µF all at 475V
  • -10%, +50% tolerance
  • 55° temperature rating
  • 1-3/8" diameter x 2-5/8" tall
Please Log In to view prices
Capacitor - F&T, 100V, 100µF, Axial Lead
0.41" dia. x 1.21" long. Operating temperature range -40°C to 105°C.
Axial lead electrolytic. Made in Germany.
Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability.
Please Log In to view prices