Capacitors

High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation.
Tolerance -20%, +50%.
Size .63" dia. x 1.25" length.

High quality multi-section can capacitors from F&T. These capacitors are similar to the LCR caps found in many Marshall and Hiwatt amplifiers. The body has a 1-⅜" diameter and a 2" length. A 1-⅜" mounting clamp is required. Made in Germany.

Clamp for mounting electrolytic can capacitors in vertical position. Supplied with #6-32 screw and nut.

SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. This cap is used in the Fisher 500 C amplifier (capacitor C91).

• 40uF@500V, 40uF@450V, 40uF@400V, 20uF@300V.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 ⅜"D X 3"H.

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47µF ±20% @ 160 VDC. ⅞" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Blue, Red, Black):

• Blue to Black = 33 µF
• Red to Black = 47 µF

Rated for 85 degree operation. Tolerance ±20%

Mallory axial capacitors rated for 400V. The available values are smaller in size than the 630V versions for builds where less space is available. These are also a great choice for use as guitar tone capacitors over the larger 630V versions. The Type 150 series axial lead metallized polyester non inductive capacitors are available in bulk or on tape and reel for automatic insertion. Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications. Features

• Epoxy end fill meets UL94V-0
• Non inductively wound
• Flame retardant outer wrap meets UL510
• Non polar

Replacement electrolytic capacitor set.
Basic set includes:

• (1) C-EC20X3-450
• (3) C-ET25-25
• (1) C-ET10-50

Premium set includes:

• (1) C-EC20X3-450 (CE Manufacturing)
• (3) C-SA25-25 (Sprague Atom)
• (1) C-SA10-25 (Sprague Atom)

Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

• 47/47/47uF 350VDC Electrolytic.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 55°C Temperature Rating.
• 1 ⅜"D X 2.6"H.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

• 40/40/40uF 525VDC.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 55°C Temperature Rating.
• 1 3/8"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.

± 10% tolerance. Rated to 105°C. Non-inductive, polypropylene film axial lead capacitor with self healing windings. Made by Illinois Capacitor.

Made in the USA on Mallory's original machinery. Used in Marantz 10B tuner.

4700 µF @ 16 VDC polarized electrolytic capacitor with axial leads. 5/8" diameter x 1-1/16" length.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

• 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 55°C Temperature Rating.
• 1 3/8"D X 3"H.

Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.

Polypropylene film capacitor.

• Tolerance: ±10%
• Radial leads
• Voltage rating: 630VDC

Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:

• Non- inductively wound polyester film/foil construction
• Radial lead
• 10% tolerance
• 100v voltage rating
• Rated for 85°C operation
• Tinned copper-clad steel leads

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

• 40µF@450V, 10µF@450V, 10µF@450V, 250@25
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 55°C Temperature Rating.
• 1 ⅜"D X 3"H.

All CE manufactured can capacitors have a two year warranty against manufactured defects.

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 10/10 µF ±20% @ 450 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Orange, Orange, Black):

• Orange to Black = 10 µF
• Orange leads are the anodes
• Black lead is the common cathode

Non-inductive polyester and oil caps, these film capacitors use oil-soaked polyester as di-electric material and are smooth and natural in sound.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. Similar to Mallory FP417.26.

• 120/100/100/100uF 350VDC.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 ⅜" D X 3.5" H.
• All CE manufactured can capacitors have a two year warranty against manufactured defects.

Replacement electrolytic capacitor set.
Basic set includes:

• (3) C-EC50-50-500CE
• (2) C-ET10-160

Premium set includes:

• (3) C-EC50-50-500FT (F&T)
• (2) C-SA10-150 (Sprague Atom)

Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.

• 40/40/40/40uF 525VDC.
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 55°C Temperature Rating.
• 1-⅜" Dia. X 3.6" H.

JJ Electronic single-section electrolytic can capacitor, 47µF -10%+30% @ 385 V. 7/8" diameter x 1-5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications