Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Cap Set - for Fender Bassman 5F6A
Replacement electrolytic capacitor set. Basic set includes:
  • (4) C-ET22-500-FT
  • (1) C-ET10-450
  • (2) C-ET10-160
  • (1) C-ET220-50

Mod set includes:
  • (4) C-ET20-500-MOD
  • (1) C-ET8-475-MOD
  • (2) C-ET8-150-MOD
  • (1) C-ET250-25-MOD

Premium set includes:
  • (4) C-SA20-500 (Sprague Atom)
  • (1) C-SA8-450 (Sprague Atom)
  • (2) C-SA8-150 (Sprague Atom)
  • (1) C-SA250-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
package of 8
Please Log In to view prices
Capacitor - Jupiter, Red Astron Capacitors, Tin Foil, Axial Lead
Modeled after the legendary capacitors, the Jupiter Red Astron capacitors have a similar style to the vintage capacitors to give a very authentic tone and look, yet with high reliability and longevity. This phenolic case potted tin foil and mylar capacitor yields a uniquely vintage tone perfect for guitar amplifiers and vintage audio amplifiers alike.
  • Construction: Polyester/Tin Foil
  • Case: Potted Phenolic Paper
  • Tolerance: +/-10%
  • Operating temperature: -55C – 85C, derate 50% at 125C.
  • Leads: 20AWG Tinned Copper
  • Application: Guitar Amplifier, Guitar Tone Control, Vintage Audio Amplifier
  • Made in the USA of US-made materials.
Please Log In to view prices
Capacitor - Fender, 150V, Wax Paper
Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses.
Please Log In to view prices
Capacitor - CE Mfg., 800V (900V Surge), 16µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 16 µF ±20% @ 800 VDC. 1-1/16" diameter x 4-½" length. Includes zip-tie and mount square. Great for antique radio restoration. Two wires (Blue, Black)
Please Log In to view prices
Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
Please Log In to view prices
Capacitor - JJ Electronics, 500V, 100/100µF, Electrolytic
Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2 7/8" height. S-H122 is a good mounting clamp for this can
Please Log In to view prices
Capacitor - CE Mfg., 800V (900V Surge), 25µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 25 µF ±20% @ 800 VDC. 1-1/16" diameter x 4-½" length. Includes zip-tie and mount square. Great for antique radio restoration. Two wires (Red, Black)
Please Log In to view prices
Cap Set - for Fender Deluxe Reverb AB763 (Black face)
Replacement electrolytic capacitor set. Basic set includes:
  • (5) C-ET16-475-FT
  • (1) C-ET25-50
  • (7) C-ET25-25

Mod set includes:
  • (5) C-ET16-475-MOD
  • (8) C-ET25-50-MOD

Premium set includes:
  • (5) C-SA16-475 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)
  • (7) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
package of 13
Please Log In to view prices
Cap Set - for Fender Bassman AA864 (Black face)
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (1) C-ET25-50
  • (4) C-ET25-25

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (5) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)
  • (4) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
package of 10
Please Log In to view prices
Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
Please Log In to view prices
Cap Set - for Fender Showman AA763 / AB763, Black / Silverface
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (1) C-ET25-50
  • (5) C-ET25-25

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (6) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)
  • (5) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
package of 11
Please Log In to view prices
Capacitor - JJ Electronics, 385V, 550µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end electronics, and industrial electronics. The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck.
Please Log In to view prices
Cap Set - for Fender Twin Reverb AB763 (Black face)
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (1) C-ET50-50
  • (7) C-ET25-25

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (1) C-ET50-50-MOD
  • (7) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (1) C-SA50-50 (Sprague Atom)
  • (7) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
package of 13
Please Log In to view prices
Cap Set - for Fender Super Reverb AB763 (Black face)
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (1) C-ET25-50
  • (7) C-ET25-25

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (8) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500
  • (2) C-SA80-450
  • (1) C-SA25-50
  • (7) C-SA25-25

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
package of 13
Please Log In to view prices
Cap set - for Fender Pro Reverb AA165 (Black face)
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (7) C-ET25-25
  • (1) C-ET25-50

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (8) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (7) C-SA25-25 (Sprague Atom)
  • (1) C-SA25-50 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
package of 13
Please Log In to view prices
Capacitor - JJ Electronics, 385V, 800µF, Electrolytic
1 3/8" diameter x 3 1/2" height. Similar to LCR
Please Log In to view prices
Capacitor - JJ Electronics, 500V, 40/20/20/20µF, Electrolytic
JJ Electronic multi-section electrolytic can capacitor, 40/20/20/20 µF -10%+30% @ 500 V. 1-1/2" diameter x 2" height (40 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
Please Log In to view prices
Capacitor - JJ Electronics, 500V, 500µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 500 µF -10%+30% @ 500 V. 1 3/8" diameter x 3 1/2" height (35 x 88 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
Please Log In to view prices
Cap Set - for Marshall JCM800 2204, 4010, 4104 (50W Volume)
Replacement electrolytic capacitor set.
Basic set includes:
  • (3) C-EC50-50-500CE
  • (2) C-ET10-160
Premium set includes:
  • (3) C-EC50-50-500FT (F&T)
  • (2) C-SA10-150 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
package of 5
Please Log In to view prices
Cap Set - for Later 80s Marshall JCM800 2203, 4103 (100W Master)
Replacement electrolytic capacitor set.
Basic set includes:
  • (3) C-EC50-50-500CE
  • (2) C-ET10-160
Premium set includes:
  • (3) C-EC50-50-500FT (F&T)
  • (2) C-SA10-150 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
package of 5
Please Log In to view prices
Capacitor - Jupiter, Bumblebee, Paper in Oil, 400V, Axial Lead
Jupiter Condenser 400V Bumblebee capacitors made with aluminum foil paper-in-oil. As one of the earliest construction types, featuring a pure paper/oil construction complete with a true hermetic seal. The tone you crave and love, in the most accurate reproduction. Made in the USA of US-made materials. Construction is accurate to the original materials used in the Bumblebee Capacitors, featuring a true hermetic seal, Aluminum Foil, Paper-in-Mineral Oil with tinned copper leads. Hand painted to reproduce the look and feel of the original Bumblebees.
  • Voltage: 400VDC
  • Dielectric: Paper in Mineral Oil
  • Tolerance: +/- 10% Operating
  • Temperature: 85°C
  • Leads: 20awg Tinned OFC Copper
  • RoHS Compliant
  • Made in USA
Please Log In to view prices
Capacitor - Fender, .05 µF at 150V, Vintage '50s, Mylar & Tin
Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including the American Vintage series of guitars and basses.
Please Log In to view prices
Capacitor - 365pF, Variable, Single Section
Single section 365 pf variable capacitor, also referred to as a tuning capacitor. A compact, rugged, economical unit used in wide variety of low-voltage applications. This capacitor's almost cubical shape makes more efficient use of space and delivers a remarkable amount of capacitance for its volume.
Please Log In to view prices
Cap Set - for Orange Graphic MK II (120 watt)
Replacement electrolytic capacitor set.
Basic set includes:
  • (2) C-EC100-385
  • (2) C-ET33-450
  • (2) C-ET22-450
  • (2) C-ET10-160
  • (2) C-ET47-50
Premium set includes:
  • (2) C-EC100-385 (JJ)
  • (2) C-SA40-500 (Sprague Atom)
  • (2) C-SA16-475 (Sprague Atom)
  • (2) C-SA10-150 (Sprague Atom)
  • (2) C-SA50-50 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time.
package of 10
Please Log In to view prices