Capacitors
Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled.
Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - JJ Electronics, 385V, 220µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.
Please Log In to view prices
Capacitor - 50V, 680pF, Ceramic Disc
Ceramic disc capacitor, 680 pF (.00068µF) rated for up to 50 V.
Non linear temperature coefficient of capacitance
Non linear temperature coefficient of capacitance
Please Log In to view prices
Capacitor - CE Mfg., 475V, 20/20/10/10µF, Electrolytic
Made in the USA on Mallory's original machinery.
- 4 sections - (2) 20μF at 475V and (2) 10μF at 475V
- -10%, +50% tolerance
- 65° temperature rating
- 1-3/8" diameter x 3" tall
Please Log In to view prices
Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
- Rated voltage: 16/16µF
- Operating temperature: -25°C - 70°C
- Rated voltage: 500VDC
- Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
- Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25
The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
Please Log In to view prices
Capacitor - CE Mfg., 160V, 33/47µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47µF ±20% @ 160 VDC. ⅞" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Blue, Red, Black):
- Blue to Black = 33 µF
- Red to Black = 47 µF
Please Log In to view prices
Capacitor - CE Mfg., 450V, 10/10/10/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 10/10/10/10uF 450VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
Please Log In to view prices
Capacitor - JJ Electronics, 500V, 250µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 250 µF -10%+30% @ 500 V, 1 3/8" diameter x 2 3/4" height (35 x 68 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
Please Log In to view prices
Capacitor - CE Mfg., 450V, 40/40/40/40µF, Electrolytic
CE Manufacturing USA made multi section can capacitor. Reproduced to Mallory specs using original Mallory machinery. 85°C temperature rating.
Please Log In to view prices
Capacitor - CE Mfg., 60µ[email protected], [email protected], [email protected], [email protected]
Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50
Please Log In to view prices
Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
Please Log In to view prices
Capacitor - 250V, 47µF, Axial Lead Electrolytic
High quality low leakage tubular electrolytic capacitor. Rated for 85° C operation.
Tolerance -20%, +50%.
Size .63" dia. x 1.25" length.
Tolerance -20%, +50%.
Size .63" dia. x 1.25" length.
Please Log In to view prices
Capacitor - 250V, .068µF, Metal Film, ±10%
0.068uF Metal Film capacitor. ± 10% tolerance. Non-inductive self healing windings. Polyester film axial lead capacitor. 250 Volts.
Please Log In to view prices
Capacitor - CE Mfg., 525V, 30/30/30 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 30/30/30uF 525VDC Electrolytic.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 55°C Temperature Rating.
- 1 3/8"D X 3"H.
Please Log In to view prices
Capacitor - CE Mfg., 160V, 47/80µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/80 µF ±20% @ 160 VDC. 1-1/16" diameter x 3-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Orange, Black):
- Red to Black = 47 µF
- Orange to Black = 80 µF
Please Log In to view prices
Capacitor - CE Mfg., 800V (900V Surge), 25µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 25 µF ±20% @ 800 VDC. 1-1/16" diameter x 4-½" length. Includes zip-tie and mount square. Great for antique radio restoration. Two wires (Red, Black)
Please Log In to view prices
Capacitor - CE Mfg., 160V, 33/33/47 µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). Made in the USA. Three sections 33uf, 33uf, 47uf at 160VDC. Measures 1" (diameter) x 3.7" (length).
Please Log In to view prices
Capacitor - CE Mfg., 450V, 20/10/10/10 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
*C-EC20-10-10-10 does contain all four values. This note is indicating that the four tabs for each capacitor section are not marked according to the standard method. The three 10 uF section are marked by D, square and triangle. The one 20 uF section is not marked with a symbol (i.e. blank).
- 20/10/10/10uF 450VDC. Used In Dynaco PAM-1 Preamplifiers. This is not a standard design of FP Cap, as the 20 Mfd is B(lank). Standard rolling would be D(iamond) as the high cap section.*
- FP / Twist lock style, Solder tabs.
- -10%, +50% Tolerance
- 85°C temperature rating.
- 1 3/8"D X 2 1/2"H.
*C-EC20-10-10-10 does contain all four values. This note is indicating that the four tabs for each capacitor section are not marked according to the standard method. The three 10 uF section are marked by D, square and triangle. The one 20 uF section is not marked with a symbol (i.e. blank).
Please Log In to view prices
Capacitor - 0.01µF, 250V, Chicklet style, Axial Lead
Flat 0.01uF (10nF) film capacitor rated for 250V. Made of metallized polypropylene film, this capacitor is a great choice for audio applications. The style of this yellow capacitor is similar in appearance to the flat rectangular Philips 341 output caps found in original Fuzz Face pedals.
Please Log In to view prices
Capacitor - Vishay BC, 250V, MKT368, Radial Lead
High quality radial capacitors rated at 250V. These MKT368 capacitors are produced by Vishay BC and formerly by Philips. These capacitors are made with metalized polyester film and sealed in epoxy lacquer. Their style and make is similar to the tropical fish capacitors of the 1960s and 70s. Suggested applications include blocking, bypassing, filtering, coupling and energy reservoir applications. Features
Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400
- Polyester film dielectric
- Vacuum deposited aluminum electrodes
- Wound mono construction
- Flame retardant epoxy material (UL-class 94 V-0)
- Tinned wire radial leads
- Performance Grade 1 (long life)
- ±10% tolerance
- Rated 250VDC
Voltage Rating SKU 100V C-368-X-100 250V C-368-X-250 400V C-368-X-400
Please Log In to view prices
Cap Set - for Marshall JCM800 2204, 4010, 4104 (50W Volume)
Basic set includes:
Package of 5
Replacement electrolytic capacitor set.Basic set includes:
- (3) C-EC50-50-500CE
- (2) C-ET10-160
- (3) C-EC50-50-500FT (F&T)
- (2) C-SA10-150 (Sprague Atom)
Please Log In to view prices
Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 20/20/20/10uF 450VDC.
- FP / Twist Lock Style. Solder Tabs.
- -10%, +50% Tolerance, 85°C Temperature Rating.
Please Log In to view prices
Capacitor - 600V, .047µF, Oil-Soaked Polyester
Non-inductive polyester and oil caps, these film capacitors use oil-soaked polyester as di-electric material and are smooth and natural in sound.
Please Log In to view prices
Capacitor - CE Mfg., 450V, 40/40µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 2 sections - 40/40µF at 450V
- -10%, +50% tolerance
- 85° temperature rating
- 1-⅜" dia. x 2.6" tall
Please Log In to view prices
Capacitor - CE Mfg., 525V, 80/40/40/20uF, PC Mount
CE Manufacturing USA-made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
- 80/40/40/20 µF 525VDC
- PC Mount Tabs.
- -10%, +50% Tolerance
- 55°C Temperature Rating.
Please Log In to view prices