Capacitors

This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 50 μF + 50 μF @ 500 VDC. 1 3/8" diameter x 2 3/16" tall. Requires clamp - S-H122. Replacement for LCR. The common negative terminal is dotted.

F&T axial lead electrolytic capacitor

• 100 uF/ 350V
• .98" diameter x 1.47" length
• Operating temperature range -40°C to 85°C
• Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability

JJ Electronic single-section electrolytic can capacitor, 47µF -10%+30% @ 385 V. 7/8" diameter x 1-5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications

Dual section electorlyic capacitor from F&T with two 8uF sections rated for 450V. This type of cap is used in Vox AC30 amps. The capacitor body has a 1" diameter and 1.5" length. Made in Germany.

SoZo's Yellow Mustard line of polyester film tube amp capacitors have been thoroughly tested by LA’s best tube amp builders. They are handmade to exact vintage specs, and beat everything available, even in high gain situations.
After years of painstaking research and development, in 2003 SoZo Amplification began manufacturing the SoZo Mustard Cap™ capacitors, which quickly caught on among discriminating musicians and amp designers. Now, hundreds of thousands of capacitors later, SoZo has engineered capacitor product lines optimized for different products, including amps by Marshall™, Fender®, Vox®, HiWatt, and others, as well as professional sound gear from Neve, API, Neumann, Universal Audio, Urei, and virtually any quality gear from the 1950s on.
These caps are successful recreations of the originals and are superbly built and excellent-sounding caps. When one considers the audio signal passes through as many as ten capacitors before exiting the amplifier, you can see how these components play an extremely large role in the tone of the amplifier.

Electrolytic F&T axial lead electrolytic capacitor

• 220 uF/ 300V
• .98" diameter x 1.96" length
• Operating temperature range -40°C to 85°C
• Made in Germany

Founded in 1948 by Heinz Fischer and Alfred Tausche, F&T Capacitors has over 60 years of experience in producing some of the finest capacitors available today. F&T Caps are known for their great tone and reliability

JJ Electronic single-section electrolytic can capacitor, 100 µF -10%+30% @ 385 V, 7/8" diameter x 1 5/8" height (22 x 42 mm). Snap-in PC mount terminals. Excellent for music industry applications

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 10/10 µF ±20% @ 450 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Orange, Orange, Black):

• Orange to Black = 10 µF
• Orange leads are the anodes
• Black lead is the common cathode

Rated for 85 degree operation. Tolerance ±20%. Measures 1.03" diameter X 1.97" height

JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.

• Rated voltage: 16/16µF
• Operating temperature: -25°C - 70°C
• Rated voltage: 500VDC
• Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
• Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)

Dual section axial lead electrolytic capacitor from F&T with two 16uF sections rated for 500V. This type of cap is used in Marshall amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.

The new SoZo fully custom silver mica capacitor is a distinct-design capacitor which is manufactured to fully exhibit the electrical characteristics of yesteryear and has custom materials. The overall goal was to manipulate the electrical characteristics to eliminate excess energy and ringing in the out-of-band audio frequencies.

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). Made in the USA. Three sections 33uf, 33uf, 47uf at 160VDC. Measures 1" (diameter) x 3.7" (length).

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" dia. x 2" long

JJ Electronic single-section electrolytic can capacitor, 220 µF -10%+30% @ 385 V, 1-3/16" diameter x 2" height (30 x 50 mm). Snap-in PC mount terminals. Excellent for music industry applications.

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47 µF @ 160 VDC & 22 µF ±20% @ 25 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Four wires (Blue, Red, Orange, Black):

• Blue to Black = 33 µF
• Red to Black = 47 µF
• Orange to Black = 22 µF

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/47 µF ±20% @ 160 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Red, Black):

• Red to Black = 47 µF

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/80 µF ±20% @ 160 VDC. 1-1/16" diameter x 3-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Orange, Black):

• Red to Black = 47 µF
• Orange to Black = 80 µF

Dual section axial lead electrolytic capacitor from F&T with two 25uF sections rated for 25V. This type of cap is used in Fender amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). Made in the USA. 33/47/47 µF ±20% @ 160 VDC. 1-1/16" diameter x 3-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Four wires (Blue, Red, Red, Black):

• Blue to Black = 33 µF
• Red to Black = 47 µF

CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47µF ±20% @ 160 VDC. ⅞" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Blue, Red, Black):

• Blue to Black = 33 µF
• Red to Black = 47 µF

Dual section axial lead electrolytic capacitor from F&T with two 33uF sections rated for 450V. This type of cap is used in Marshall amps. The capacitor body has a 1" diameter and 2" length. Made in Germany.

Same diameter as LCR. Great for use in Marshall amplifiers. 1-3/8" diameter x 2" tall. S-H122 is a good mounting clamp for this can

High quality multi-section can capacitors from F&T. These capacitors are similar to the LCR caps found in many Marshall and Hiwatt amplifiers. The body has a 1-⅜" diameter and a 2" length. A 1-⅜" mounting clamp is required. Made in Germany.