Capacitors

Capacitors are passive devices that are used in almost all electrical circuits for rectification, coupling and tuning. Also known as condensers, a capacitor is simply two electrical conductors separated by an insulating layer called a dielectric. The conductors are usually thin layers of aluminum foil, while the dielectric can be made up of many materials including paper, mylar, polypropylene, ceramic, mica, and even air. Electrolytic capacitors have a dielectric of aluminum oxide which is formed through the application of voltage after the capacitor is assembled. Characteristics of different capacitors are determined by not only the material used for the conductors and dielectric, but also by the thickness and physical spacing of the components.
Capacitor - JJ Electronics, 500V, 16/16µF, Electrolytic
JJ Electronics aluminum electrolytic capacitor. Low impedance, low ESR, wide frequency range. For power supplies, high-end exlectronics, and industrial electronics.
  • Rated voltage: 16/16µF
  • Operating temperature: -25°C - 70°C
  • Rated voltage: 500VDC
  • Capacitance tolerance (at 100Hz, 20°C): -10% + 30%
  • Dissipation factor (at 100Hz, 20°C): 0.15 - 0.25

The aluminum case capacitors are supplied with PVC sleeve insulation and a safety vent located on end deck. Load life is 1000 hours (at maximum operating temperature, rated voltage, and AC current load)
Please Log In to view prices
Capacitor - CE Mfg., 525V, 30/30/30 μF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 30/30/30uF 525VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.
Please Log In to view prices
Capacitor - CE Mfg., 475V, 40/20/20/10µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 40/20/20/10 capacitors like this can be found in Seeburg HF-R & HF-J jukebox amplifiers.
  • 40/20/20/10uF 475VDC Electrolytic.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 ⅜"D X 2 ½"H.
  • All CE manufactured can capacitors have a two year warranty against manufactured defects.
Please Log In to view prices
Capacitor - 100pF, Variable, Single Section
This capacitor is used as a tuning capacitor in a variety of RF test equipment and ham radio gear. It's combination of low price, high maximum voltages, fairly large capacitances, and low-leakage L-4 grade ceramic have made it a popular configuration. Single section 100pf, screwdriver or knob adjustable, full rotation.
Please Log In to view prices
Capacitor - CE Mfg., 475V, 20/20/10/10µF, Electrolytic
Made in the USA on Mallory's original machinery.
  • 4 sections - (2) 20μF at 475V and (2) 10μF at 475V
  • -10%, +50% tolerance
  • 55° temperature rating
  • 1-3/8" diameter x 3" tall
Please Log In to view prices
Mounting Plate - Metal, for 1" Can Capacitor
Metal plate for mounting FP type can capacitors. Designed for use with three section, 1” capacitors.
Please Log In to view prices
Capacitor - CE Mfg., 525V, 20/20/20µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20uF 525VDC. FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 55°C Temperature Rating.
  • 1 3/8"D X 3"H.

Note: This 3-section capacitor is in a 4-section case. A 4-section insulator such as S-H120 should be used with this capacitor, rather than a 3-section insulator.
Please Log In to view prices
Capacitor - Fender, 150V, Wax Paper
Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses.
Please Log In to view prices
Cap Set - for Fender Super Reverb AB763 (Black face)
Package of 13
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (1) C-ET25-50
  • (7) C-ET25-25

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (8) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500
  • (2) C-SA80-450
  • (1) C-SA25-50
  • (7) C-SA25-25

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Please Log In to view prices
Capacitor - CE Mfg., 450V, 20/20/20/10µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 20/20/20/10uF 450VDC.
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
Please Log In to view prices
Capacitor - 500V, 32/32µF, Electrolytic
This low ripple capacitor tests superior to any other capacitor of its value currently being made. Commonly used as filter capacitors in guitar amps. 32μF + 32μF @ 500VDC. 1-3/8" dia. x 2" tall. Requires clamp - S-H122. Replacement for LCR.
Please Log In to view prices
Capacitor - CE Mfg., 160V, 33/47µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 33/47µF ±20% @ 160 VDC. ⅞" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Blue, Red, Black):
  • Blue to Black = 33 µF
  • Red to Black = 47 µF
Please Log In to view prices
Capacitor - CE Mfg., 160V, 47/80µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/80 µF ±20% @ 160 VDC. 1-1/16" diameter x 3-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Orange, Black):
  • Red to Black = 47 µF
  • Orange to Black = 80 µF
Please Log In to view prices
Capacitor - CE Mfg., 400V, 40/40/30/20µF, Electrolytic
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced To Exact Mallory Specs Using Original Mallory Machinery.
  • 40/40/30/20uF 400VDC Electrolytic.
  • FP / Twist Lock Style. Solder Lugs.
  • -10%, +50% Tolerance, 65°C Temperature Rating.
  • 1 3/8"D X 2"H.

Great replacement for the Echoplex EP-1.
All CE manufactured can capacitors have a two year warranty against manufactured defects.
Please Log In to view prices
Capacitor - JJ Electronics, 385V, 350µF, Electrolytic
JJ Electronic single-section electrolytic can capacitor, 350 µF -10%+30% @ 385 V, 1 3/8" diameter x 2" height (35 x 50 mm). Clamp mount, solder lug terminals. Excellent for music industry applications
Please Log In to view prices
Cap Set - for Marshall JCM800 2204, 4010, 4104 (50W Volume)
Package of 5
Replacement electrolytic capacitor set.
Basic set includes:
  • (3) C-EC50-50-500CE
  • (2) C-ET10-160
Premium set includes:
  • (3) C-EC50-50-500FT (F&T)
  • (2) C-SA10-150 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Please Log In to view prices
Cap Set - for Fender Twin Reverb AB763 (Black face)
Package of 13
Replacement electrolytic capacitor set. Basic set includes:
  • (3) C-ET22-500-FT
  • (2) C-ET80-450-FT
  • (1) C-ET50-50
  • (7) C-ET25-25

Mod set includes:
  • (3) C-ET20-500-MOD
  • (2) C-ET70-350-MOD
  • (1) C-ET50-50-MOD
  • (7) C-ET25-50-MOD

Premium set includes:
  • (3) C-SA20-500 (Sprague Atom)
  • (2) C-SA80-450 (Sprague Atom)
  • (1) C-SA50-50 (Sprague Atom)
  • (7) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Please Log In to view prices
Capacitor - CE Mfg., 60µF@525V, 40@525, 10@450, 25@50
Capacitor - Electrolytic, 60/525, 40/525, 10/450, 25/50
Please Log In to view prices
Cap Set - for Fender Champ 5F1 (Tweed)
Package of 4
Replacement electrolytic capacitor set. Basic set includes closest generic values:
  • (1) C-ET22-450
  • (2) C-ET10-450
  • (1) C-ET25-25

Mod set includes:
  • (1) C-ET16-475-MOD
  • (2) C-ET8-475-MOD
  • (1) C-ET25-50-MOD

Premium set includes:
  • (1) C-SA16-475 (Sprague Atom)
  • (2) C-SA8-450 (Sprague Atom)
  • (1) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Please Log In to view prices
Capacitor - CE Mfg., 500V, 30/30µF, Electrolytic
Reproduced To Exact Mallory Specs Using Original Mallory Machinery. 30/30uF 500VDC Electrolytic. FP / Twist Lock Style. Solder Lugs. -10%, +50% Tolerance, 55°C Temperature Rating. 1 3/8"D X 2 1/2"H.
Please Log In to view prices
Capacitor - CE Mfg., 160V, 33/33/47 µF, Electrolytic
Electrolytic capacitor, three sections 33uf, 33uf, 47uf at 160VDC. Measures 1" (diameter) x 3.7" (length).
Please Log In to view prices
Cap Set - for Fender Vibro Champ AA764 (Black face)
Package of 5
Replacement electrolytic capacitor set.
Basic set includes:
  • (1) C-EC20X3-450
  • (3) C-ET25-25
  • (1) C-ET10-50
Premium set includes:
  • (1) C-EC20X3-450 (CE Manufacturing)
  • (3) C-SA25-25 (Sprague Atom)
  • (1) C-SA10-25 (Sprague Atom)
Warning: Some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Please Log In to view prices
Cap Set - for Fender Princeton Reverb AA1164 (Black face)
Package of 8
Replacement electrolytic capacitor set. Basic set includes:
  • (1) C-EC20X4-475
  • (1) C-ET25-50
  • (6) C-ET25-25

Mod set includes:
  • (1) C-EC20X4-475
  • (7) C-ET25-50-MOD

Premium set includes:
  • (1) C-EC20X4-475 (CE Manufacturing)
  • (1) C-SA25-50 (Sprague Atom)
  • (6) C-SA25-25 (Sprague Atom)

Warning: some electrolytic capacitors can store charge even after the amp has been turned off and unplugged for some time. Always make sure your original electrolytic capacitors do not have a voltage present before touching them.
Please Log In to view prices
Capacitor - CE Mfg., 160V, 47/47µF, Electrolytic
CE Manufacturing multi-section electrolytic "Firecracker" style capacitor (modern polarized electrolytic caps in a tube for a vintage look). 47/47 µF ±20% @ 160 VDC. 7/8" diameter x 2-¾" length. Includes zip-tie and mount square. Great for antique radio restoration. Three wires (Red, Red, Black):
  • Red to Black = 47 µF
Please Log In to view prices