Cables

Cable - Switchcraft, Instrument, Molded, Straight to Right Angle, 10’
Vintage style Switchcraft instrument cables that match the original case candy cables sold with 1960s Fender® and Gibson guitars. These use high quality cable with a braided shielding over the 22AWG single conductor with a durable gray PVC outer jacket. The ends feature the classic molded connectors found on the vintage cables. Features
  • Classic Switchcraft Molded ¼” (6.35mm) Connectors
  • Straight to Right Angle
  • Braided Shielding
  • 22AWG Conductor
  • Durable PVC Outer Jacket
  • Vintage Style
Please Log In to view prices
Cable Clamp - Black Nylon, .203” Mounting Hole
Black nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. The ¼ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the RCA reverb tank cables. The 5/16 in. version works well with the S-W125X and S-W132X bare end power cables. See P-HCABLECLAMP-X for white nylon versions of these clamps.
Please Log In to view prices
Bulk Cable - Rapco, Instrument, Mini, 0.195” O.D.
Made in USA instrument cable with a 0.195” outer diameter. This high quality cable is perfect for pedal boards patch cables and also works great for standard instrument cables.
  • 20AWG stranded bare copper conductor
  • Polyethylene insulation covered by a sheet of conductive vinyl
  • Copper braid shield
  • PVC outer jacket
Sold by the foot
Please Log In to view prices
Cable - ProCo Stagemaster, XLR for microphones
ProCo StageMaster low-impedance microphone cables are designed to be quiet, durable and dependable. These cables are hand-soldered with top-quality metal XLR connectors and extremely low-noise, twisted-pair wire.
  • Quiet and Durable CS-MIC.K 2-conductor Shielded Audio Cable
  • Terminated with High Quality Nickel Plated XLR Connectors for Years of Superior Performance and Maximum Value
  • Individually Tested to Meet Performance and Quality Requirements
Please Log In to view prices
Cable Clamp - Nylon, .203” Mounting Hole
Nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. The ¼ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the RCA reverb tank cables. The 5/16 in. version works well with the S-W125X and S-W132X bare end power cables.
Please Log In to view prices
Cable - RCA, Shielded, Right Angle Plugs
Right angle RCA cables for Reverb Tanks and other electronic devices.
Please Log In to view prices
Cable Tie Mount - Nylon, Adhesive Backing
Colors Available:
Nylon cable tie mounts with adhesive backing. These mounts easily attach to most surfaces using a strong foam adhesive. Zip ties can be fed through the openings on the mount to secure wires to an enclosure, board, or any other convenient location.
package of 5
Please Log In to view prices
Cable - Belden, Microphone, 1 Conductor 20 AWG, Stranded
20 AWG stranded (27x34) high-conductivity tinned copper conductor, EPDM rubber insulation, conductive textile (100%) plus tinned copper spiral shields (95% coverage), paper tape, CPE jacket. This cable type is popularly used in microphones and has many other applications.
Sold by the foot
Please Log In to view prices
Cable - Grover, Instrument, Noiseless, Braided, Gold-Plated Plug
A 6.5mm noiseless cable equipped ¼" straight molded phone plug ends. Specifically designed cables prevent shocks and allows for minimum hum or noise. Provides 100% signal! Braided Fabric Covered Cable with Gold Plated Plugs
Please Log In to view prices
Tool - Cable Tie Gun
Easy to use cable tie gun cuts ties up to 50 lb. tensile. Use this tool to pull ties tightly and then cut the excess length.
Please Log In to view prices
Connector - Accutronics, extra for reverb tanks
Connector - for Accutronics Blue reverb tanks P-RAMC2BF2 and P-RAMC2BF3. One green and one red per item.
package of 2
Please Log In to view prices
Cable - Grover, XLR Female, ¼" Male, 25', Braided
A 6.5mm 2P braided microphone cable. Specifically designed to prevent shocks and allows for minimum hum or noise. Provides 100% signal! Braided XLR Female to 1/4" phone plug, High Z
Please Log In to view prices
Cable - Power All, 11 Lead Right Angle Daisy Chain
Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.
Please Log In to view prices
Bulk Cable - ProCo Excellines, Guitar, Shielded
Make your own cable. Excellines 20 AWG 26 strand guitar cable. Sold per foot
Sold by the foot
Please Log In to view prices
Cable - Power All, Blue Right Angle Phone Plug Extension Jumper
Included in the PA-9ECD Deluxe Kit and also sold separately, the Cable-Blue/R features a right-angle jack that allows users to power effect units that use a ⅛" (3.5 MM) phone plug connector with tip-positive polarity. The Cable-Blue/R can be connected to any male jack on the Cable-5 Daisy Chain, or directly to the ECO-Dapter® itself.
Please Log In to view prices
Cable - ProCo Excellines, Instrument, 10' straight / right-angle
ProCo cable is the world renown industry standard. The excellines cable are the musician's choice when it comes to guitar cable made with G&H ¼" BigFoot straight phone plug to ¼" Bigfoot right angle phone plug.
Please Log In to view prices
Cable - Power All, Grey Battery Snap Jumper
Included in the PA-9ECB Basic Kit and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that run off 9-volt batteries but do not have an external AC power jack. The Cable-Grey hooks directly to the unit's Battery Snap and can be connected to any of the Power-All daisy chains, or directly to the Power-All.
Please Log In to view prices
Bulk Cable - ProCo, Speaker, 2 Conductor, Non-shielded
Make your own cable. Excellines 16AWG two conductor non-shielded cable is sold by the foot.
Sold by the foot
Please Log In to view prices
Cable - Fender, Original Series, Instrument, 30’ Coiled
Colors Available:
The Fender® Original Series raises the bar for quality and reliability with their coiled cables. This cable uses a 23 gauge 99.95% oxygen free copper conductor with a 90% shield and a classic Fender® color for the insulation. These hand soldered cables use nickel plated ¼” connectors with a right angle and one straight plug.
Please Log In to view prices
Cable - ProCo Stagemaster, Instrument
24AWG StageMASTER Instrument Cables are designed to be quiet, durable and dependable. They are hand-soldered to perfection using top quality metal ¼" connectors and extremely low-noise cable.
Please Log In to view prices
Patch Cables - 3.5mm, Mono
Colors Available:
Low cost, high quality 3.5mm patch cables in a variety of lengths and colors. The cables are super flexible, have a great droop, and are shipped coiled so no permanent kinks are formed. With the large selection of lengths and colors, these cables are the perfect choice for any sized system.
Please Log In to view prices
Cable - ProCo Stagemaster, for Speaker
ProCo StageMaster cables are designed to be quiet, durable and dependable. Constructed from high quality materials and built to withstand everyday use. They are hand-soldered to perfection using top quality metal 1/4” connectors and extremely low-noise cable.
Please Log In to view prices
Cable Tie - durable Nylon, 5.5”, 18 lb
Colors Available:
Durable nylon cable ties. These zip ties are a great way to tidy up project wiring and securing components. Features
  • Approved for outdoor use.
  • UL Listed 6.6 nylon.
  • Locks tightly - Won’t stretch or slide.
  • Temperature range from 40° to 180°F.
package of 10
Please Log In to view prices
Reverb Cable Kit - Vintage style RCA, 3 ft and 5 ft
Fully Assembled version: Package includes two vintage style RCA cables: One 3 foot and one 5 foot.
DIY Kit: Assembly required. Kit comes with one 3 ft. and one 5 ft. length of insulated braided wire and 4 RCA plugs. Solder RCA plugs onto the ends of the wires by stripping 3/8" of the white insulation from wire. Insert wire into tip. Solder in place. Next, solder braided shielding to sleeve of the plug.
package of 2
Please Log In to view prices