Single standard snap-on 9V battery clip. Features six inch pre-stripped and pre-tinned leads for an easy connection.

Premium 9V battery clip with a rigid plastic frame and I-style wire orientation. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.

9V battery clip with a fiberboard frame. This high quality battery snap features tinned brass eyelets that secure the nickel-plated steel contacts to the fiberboard. Wires can be soldered directly to the eyelets allowing for custom length battery connections. This fiberboard style is similar to the 9V battery connectors in vintage electronics such as the Arbiter Fuzz Face.

High quality chassis mount battery holder. This steel holder fits standard 9V batteries. The horizontal mount and small footprint of the holder allows for easy placement where vertical space is limited.

Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.

Extra heavy duty carbon zinc batteries from GP. The GP Greencell 9V is a favorite for fuzz pedals and is the stock battery for many boutique builders such as D*A*M and others. Additionally, these batteries are a great choice for any low current battery powered pedal or other devices.

High quality chassis mount battery holder. This steel holder fits standard 9V batteries. The vertical mount and small footprint of the holder are great for narrow spaces and work well for any project. See S-H158 for horizontal-mount.

Premium 9V battery clip made of a rigid plastic frame with an insulating wall enclosing the battery terminals. This high quality battery snap features nickel-plated brass contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.

Premium 9V battery clip with a rigid plastic frame. This high quality battery snap features nickel-plated phosphor bronze contacts. The six inch leads are 26 AWG stranded wire, prestripped and tinned for an easy installation.

1/2 inch by 2 inch adhesive foam strip for cushioning 9V batteries in pedal enclosures. This black, medium density foam used an acrylic adhesive and paper liner. The high quality 3M materials ensure a durable foam and lasting adhesive. Made with ¼ inch thick foam.

Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.

Switchcraft Type 12A Littel-Jax shorting type phone jack. The switched terminal is normally closed and is usually connected to ground to eliminate hum when unplugged. Mono 2-conductor. Mates with standard ¼" plugs and is available with standard or long bushings. Includes nut and washer

Carbon composition resistors are made by mixing carbon particles with a binder molded into a cylindrical shaped, and then baked. Resistance decreases as temperature increases. Resistance is more prone to drifting than with other types. Standard 'classic' resistor. Sold in multiples of 5. 10% tolerance.

Small plastic knobs with set screw and brass insert. Similar to the small knobs used on many Dunlop / MXR pedals. These knobs have a fluted grip with an indicator line as well as a dot indicator on the skirt. Fits ¼” (6.35mm) pot shafts.

• Fits ¼" Solid Shafts (Set Screw)
• Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
• Brass Set Screw and Insert
• High Quality Plastic

High quality R82 Series box film capacitors from Kemet. These polyester film capacitors have 5mm lead spacing, a minimum voltage rating of 63VDC, and a tolerance of ±10% or better. The small size, high specifications, and radial mounting makes them an excellent choice for PCB builds of pedals, synthesizer, and other audio equipment. The R82 Series is constructed of metallized polyester film with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box of material meeting the UL 94V–0 requirements.

• Voltage rating: 63 VDC Minimum
• Lead Spacing: 5 mm
• Capacitance tolerance: ±10% or better
• Operating temperature range of -55˚C to +105˚C
• RoHS compliance and lead-free terminations
• Self-healing

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. Package of 5. These resistors are perfect for pedal builders! 1/4 watt.

Generic white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.

A semiconductor device which passes current in the forward direction (from anode to cathode), and blocks current in the opposite direction.

Anodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.