Amplifier Parts

Fuse Set - Fast and Slow Blow, 0.25" x 1.25", 8 types, 20 each
Package of 160
Fuse kit, fast and slow blow. Contains the following fuses:
  • 20x Slo-Blo, 2 Amp F-Z3AG-S2
  • 20x Slo-Blo, 3 Amp F-Z3AG-S3
  • 20x Slo-Blo, 1 Amp F-Z3AG-S1
  • 20x Slo-Blo, 4 Amp F-Z3AG-S4
  • 20x Slo-Blo, 5 Amp F-Z3AG-S5
  • 20x Fast-Blo, 2.5 Amp F-Z3AG-F2D5
  • 20x Fast-Blo, 1 Amp F-Z3AG-F1
  • 20x Fast-Blo, 3 Amp F-Z3AG-F3
Please Log In to view prices
Amp Cover - Marshall, for Straight 4x12 Cabs
Fits straight 4 X 12 cabinets.
Vinyl Cover for Marshall 1960B Straight-front Cabinet, with Piping and Marshall Logo
Please Log In to view prices
Amp Cover - Marshall, for Slant 4x12 Cabs (Not 1960TV)
Genuine Marshall cabinet cover. Fits slant 4 X 12 cabinets except the 1960TV.
Height- 30"
Width-30"
Top Depth-11.5"
Bottom Depth-14.5"
Please Log In to view prices
Amp Cover - Marshall, for Most Full Size Marshall Heads
Fits most full-size heads. Does not fit DSL100H. 30" x 11" x 9".
Please Log In to view prices
Amp Cover - For Marshall Slant 4x12 Cab, Black
Vintage style using only the finest tolex available.
  • Height: 30"
  • Width: 30"
  • Depth: 14.5"
Please Log In to view prices
Amp Cover - For Marshall Straight 4x12 Cab
Vintage style using only the finest tolex available.
  • Height: 29"
  • Width: 30"
  • Depth: 14"
Please Log In to view prices
Tilt Back Leg Kit - Fender, for tilting amps
Package of 2
If your ears were attached to your knees, your amp would sound better, but since they usually are located on the sides of your head, Fender® has Tilt-back Legs! Secured to the sides of your amp cabinet, these legs allow you to tilt you amp back so you can hear what you're doing!
  • BF Bandmaster, BF Twin Reverb, SF Bantam Bass, SF Pro Reverb, SF Vibrosonic Reverb, Blonde Bandmaster, BlondeTwin
  • Comes with mounting hardware
Please Log In to view prices
Capacitor Cover - Fender®, for Bassman
Capacitor cover for Fender® Bassman. Mounting center are 5" x 3". Measurements are 5" x 3" x 1 ½".
Please Log In to view prices
Piggyback Hardware - Fender, Clip Bars
Package of 2
Pure Vintage Piggyback Clip Bars
  • Set of two chrome-plated clip bars used to mount "piggyback"-style amplifier heads to amplifier cabinets
  • Includes all mounting hardware, including tee nuts, ribbon springs and mounting screws
  • Introduced on Blonde and Blackface™ era amplifiers
  • Used on Tone-Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
Please Log In to view prices
Amp Cover - for Fender '65 Twin Reverb Reissue
Vintage style using only the finest tolex available.
  • Height: 21"
  • Width: 27"
  • Depth: 12"
Please Log In to view prices
Amp Cover - For Fender '70s Twin Reverbs
Vintage style using only the finest tolex available.
  • Height: 19"
  • Width: 26.5"
  • Depth: 11"
Please Log In to view prices
Amp Cover - Replacement for Fender® Princeton Reverb
Vintage style using only the finest tolex available.
  • Height: 16"
  • Width: 20.5"
  • Depth: 9"
Please Log In to view prices
Amp Cover - For Marshall Full Size Amp Head
Vintage style using only the finest tolex available.
  • Height: 11"
  • Width: 30"
  • Depth: 9"
Please Log In to view prices
Fan - 115V, AC ~\frac{50}{60}~ Hz, 1 Phase, low noise
Super low noise 115V-AC. Dimensions are 4 11/16" (height) x 4 11/16" (width) x 1 ½" (depth). The distance between mounting centers is 4 1/8" x 4 1/8".
Please Log In to view prices
Logo - Marshall, Gold Script on white plastic, 6"
Original Marshall™ mini logo.
  • Fits 1959HW, Bluesbreaker model 1962 and others.
  • Gold lettering on white plastic
  • 6” (40 x 150 mm)

Not for resale. For repair or replacement only.
Please Log In to view prices
Speaker Grill - Peavey, with mounting hardware
Peavey Grill Kit (for speaker cone and dust cap protection)
  • Manufactured from 1.2mm steel
  • Matte black powder coated paint finish
  • Surrounded with rubber trim insulator to reduce rattle
  • Four 90 degree mounting brackets and 1/4-20 hardware included
Please Log In to view prices
Amp Cover - For Fender 65 Deluxe Reverb
Vintage style using only the finest tolex available.
  • Height: 17"
  • Width: 25"
  • Depth: 9.5"
Please Log In to view prices
Amp Cover - For Fender Bassman Head
Vintage style using only the finest tolex available.
  • Height: 8.5"
  • Width: 22.5"
  • Depth: 10"
Please Log In to view prices
Capacitor Cover - Fender®, for Reissue Vibroverb
Capacitor cover for Fender ® Reissue Vibroverb. Mounting centers are 5.75" x 3". Measurements are 6.25" x 3.5" x 1.42"
Please Log In to view prices
Logo - Marshall, white script, replacement for amplifiers
Original white Marshall™ logo for use on Marshall amplifiers.
Please Log In to view prices
Amp Cover - Fender, For Blues Jr., Brown
Protect your investment with a fitted Genuine Fender amplifier cover. Designed to fit your Blues Jr. and Blues Jr III perfectly.
  • Blank brown nylon cover
  • Designed to fit Blues Junior™ and Blues Junior™ III amplifiers (1996-present)
  • Height: 16" (40.64 cm)
  • Width: 18" (45.72 cm)
  • Depth: 9.18" (23.31 cm)
Please Log In to view prices
Logo - Marshall, Gold, 100, for cabinets
Original Marshall™ '100' logo.
  • Fits 1960HW cab
  • Gold lettering on white plastic.

This logo is the 3-pin version:
  • Center to center pin spacing between the first two digits = 15/16''
  • Center to center pin spacing between the second two digits = 1''

Not for resale. For repair or replacement only.
Please Log In to view prices
Amp Cover - Fender®, for 65 Deluxe Reverb
For '65 Deluxe Reverb, black. Dimensions: Height: 17" Width: 24 ½" Depth: 9 1/4" top, 9 ¼" bottom
Please Log In to view prices