Amplifier Parts

Metal lift-off hinge. 0.17" mounting hole diameter for use with #8 screws.

#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on Fender® guitars.

Heavy duty swivel caster for use on Fender and other amps. Each 2" diameter wheel supports 45.359Kg / 100Lb.

Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.

Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.

• .062" thick
• 3" x 15"

6-32 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 6-32 size works in place of original M3.5 screws that were used for the rotary selector switches, octal sockets, capacitor clamps, and chokes. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.

#4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.

#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.

#6-32 x ⅝” slotted drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

Plastic IEC C14 connector for power entry. This power receptacle mounts with two screw holes which are counterunk for a clean look when using countersunk screws. This is a 3 prong connector for power cables with ground connections. Internal connections can be soldered into place or used with quick disconnects. See Specifications, Files, and Documents for a datasheet with dimensions and panel cut out sizing.

Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-SG-3X
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

1 ½" diameter x ¾" high with metal washer. Sold individually.

18-8 stainless steel sheet metal screws. These flat head #10 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for AC power cables used in vintage Fender® blackface and silverface combo amps. For the smaller #8 screws often used with reverb cables, see S-HFS8-34.

#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.

#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.

Vintage style service information label. This label has a line for the name of a tech or service company, contact information, and the date of service. This sticker is a great way to provide service info with a professional presentation on the chassis of a pedal or amp.

1" Oval head, Phillips screw with matching M4 threaded t-nut. (package of 4)

Vintage style quality assurance label. This label has an electronic test line for the name of a technician responsible for testing the electronics and a sound test line for the name of a technician responsible for testing the functionality of the device. This sticker is a great way to document quality assurance testing with a professional presentation on the chassis of a pedal or amp.

Phillips pan head machine screw, 1 x 30. Designed to go through a pre-tapped hole or nut to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Generic amplifier chassis straps. Mounting hardware sold separately. Sold individually.

Long life general replacement lamps for dials, indicators, etc. Sold individually.

I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses

Silver cap for Marshall vintage style handles. Sold individually.

3-leg black, standard. 18 gauge steel, ½" radius. Sold individually.