Amplifier Parts

Tube Stabilizer - Fender®, Hot Rod Series
Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.
Please Log In to view prices
Dial Lamp - #53, G-3-½, 14.4V, .12A, Bayonet Base
Package of 10
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.
Please Log In to view prices
Fuse Holder - GMA or GMD Type, Low Profile, Slotted, Spade Lug
Panel mount GMA or GMD (5x20mm) fuse holder with spade lug connectors. This fuse holder features a low profile slotted cap and reduced overall height. It is a similar style to fuse holders used on many Marshall amps. Mounting nut included.
Please Log In to view prices
Faceplate - Marshall, 1960 Classic plate
Original Marshall™ 1960 Classic plate
  • Fits 1960AC and 1960BC cabinets
  • Black on gold
  • 29 x 85mm
  • Adhesive backing

Not for resale. For repair or replacement only.
Please Log In to view prices
Dial Lamp - #81, G-6, 6.5V, 1.02A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold individually.
Please Log In to view prices
Amp Cover - Replacement for Fender® Princeton Reverb
Vintage style using only the finest tolex available.
  • Height: 16"
  • Width: 20.5"
  • Depth: 9"
Please Log In to view prices
Amp Cover - Marshall, for Slant 4x12 Cabs (Not 1960TV)
Genuine Marshall cabinet cover. Fits slant 4 X 12 cabinets except the 1960TV.
Height- 30"
Width-30"
Top Depth-11.5"
Bottom Depth-14.5"
Please Log In to view prices
Fan - 115V, AC ~\frac{50}{60}~ Hz, 1 Phase, low noise
Super low noise 115V-AC. Dimensions are 4 11/16" (height) x 4 11/16" (width) x 1 ½" (depth). The distance between mounting centers is 4 1/8" x 4 1/8".
Please Log In to view prices
Capacitor Cover - Fender®, for Bassman
Capacitor cover for Fender® Bassman. Mounting center are 5" x 3". Measurements are 5" x 3" x 1 ½".
Please Log In to view prices
Snubber Kit - eliminate fuzz from amplifier
Snubber parts kit for circuits. Used to build a "snubber circuit" to remove unwanted high frequencies and high voltages resulting from output transformer ringing in a guitar amplifier, without the "brick wall" effect of using diodes.
Please Log In to view prices
Caster - Peavey, Pop Out Swivel set
Package of 4
Peavey Pop Out Swivel Caster Set
  • Allows you to remove wheels when necessary
  • Four recessed mounting brackets, four ball-bearing swivel wheels and twelve black anodized Phillips wood screws are included
  • Caster has maximum load capacity of 80 lbs
  • Clam shell packaging
  • Weight Unpacked: 2.07 lb(0.94 kg)
  • Weight Packed: 2.19 lb(0.993 kg)
  • Width Packed: 5.875"(14.9225 cm)
  • Height Packed: 9"(22.86 cm)
  • Depth Packed: 2.875"(7.3025 cm)
Please Log In to view prices
Fuse Set - Fast and Slow Blow, 0.25" x 1.25", 8 types, 20 each
Package of 160
Fuse kit, fast and slow blow. Contains the following fuses:
  • 20x Slo-Blo, 2 Amp F-Z3AG-S2
  • 20x Slo-Blo, 3 Amp F-Z3AG-S3
  • 20x Slo-Blo, 1 Amp F-Z3AG-S1
  • 20x Slo-Blo, 4 Amp F-Z3AG-S4
  • 20x Slo-Blo, 5 Amp F-Z3AG-S5
  • 20x Fast-Blo, 2.5 Amp F-Z3AG-F2D5
  • 20x Fast-Blo, 1 Amp F-Z3AG-F1
  • 20x Fast-Blo, 3 Amp F-Z3AG-F3
Please Log In to view prices
Please Log In to view prices
Handle Hinge - Nickel, metal construction, Lift Off
Metal lift-off hinge. 0.17" mounting hole diameter for use with #8 screws.
Please Log In to view prices
Fuse Holder - 3AG-Type, Tweed Style, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
Note: The spade lugs have a detent rather than a hole.
Please Log In to view prices
Amp Cover - For Fender Vintage Silverface Champ
Vintage style using only the finest tolex available.
  • Height: 14"
  • Width: 17"
  • Depth: 7"
Please Log In to view prices
Amp Cover - Fender®, for '59 Bassman
For '59 Bassman, Blues Deville 410 (fits all), brown. Dimensions: Height: 22" Width: 23 ½" Depth: 10" top, 11" bottom
Please Log In to view prices
Dial Lamp - #55, G-4-½, 7.0V, .41A, Bayonet Base
Package of 10
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10. Replacement for Fender ®.
Please Log In to view prices
Panel - aluminum, front, for Super Reverb
Basic front panel for Super Reverb. Material is .032" aluminum.
Please Log In to view prices
Amp Cover - Fender®, for 65 Twin Reverb Reissue
Amplifier cover for '65 Twin Reverb Reissue, black
Please Log In to view prices
Amp Cover - Fender, For Blues Jr., Brown
Protect your investment with a fitted Genuine Fender amplifier cover. Designed to fit your Blues Jr. and Blues Jr III perfectly.
  • Blank brown nylon cover
  • Designed to fit Blues Junior™ and Blues Junior™ III amplifiers (1996-present)
  • Height: 16" (40.64 cm)
  • Width: 18" (45.72 cm)
  • Depth: 9.18" (23.31 cm)
Please Log In to view prices
Fuse Block - For GMA / GMD Fuses, Low Profile
Open frame fuse block for GMA or GMD 5×20mm size fuses with a low profile design that features solder terminals made of tin plated brass. A unique design feature provides self-alignment of the clips to the fuse caps. This feature, plus a one-piece clip/terminal design, assures low contact resistance.
Please Log In to view prices
Piggyback Hardware - Fender, Clip Bars
Package of 2
Pure Vintage Piggyback Clip Bars
  • Set of two chrome-plated clip bars used to mount "piggyback"-style amplifier heads to amplifier cabinets
  • Includes all mounting hardware, including tee nuts, ribbon springs and mounting screws
  • Introduced on Blonde and Blackface™ era amplifiers
  • Used on Tone-Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
Please Log In to view prices