Amplifier Parts

Dial Lamp - #55, G-4-½, 7.0V, .41A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10. Replacement for Fender ®.
package of 10
Please Log In to view prices
Dial Lamp - #40, T-3-¼, 6.3V, .15A, Screw Base
Long life general replacement lamps for dials, indicators, etc. Sold in packages of 10.
package of 10
Please Log In to view prices
package of 10
Please Log In to view prices
Foot - Rubber, ⅜" height x ~\frac{15}{16}~" diameter
Package of 4 rubber feet (15/16" diameter x ⅜" height) mounting hole is good for #6 screws.
package of 4
Please Log In to view prices
Screw - #6 x ¾", Flat Head, Stainless Steel
Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
package of 8
Please Log In to view prices
Dial Lamp - Fender Style, Premium Pilot Assembly
Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.
  • 11/16" chassis hole
  • Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
  • Rating: 125V, 75W
  • Threading: 9/16 - 27

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123
Please Log In to view prices
Fuse Holder Cap - 3AG, Slotted, for Marshall 2000 Series
Fuse holder cap for the fuse holder found on the Marshall® JCM2000 series such as the TSL100, TSL122, DSL50, and DSL100 as well as other amps. This cap fits 3AG fuses and pairs with S-H211.
Please Log In to view prices
Fuse - Slow-Blow, 250V, Miniature, GMD-type 5mm x 20mm
Protect your expensive investment or hobby with inexpensive fuses. Time-delay, low breaking capacity. Rated at 250V. Package of 5
package of 5
Please Log In to view prices
Foot - Rubber, 0.75" Tall, Tapered, 1.625" Top, 1.25" Bottom
Rubber tapered feet with a non-threaded screw hole and a steel washer insert. Sold in a package of 4. Perfect feet for amplifier cabinets or amp heads.
package of 4
Please Log In to view prices
Logo - Ampeg, "A" symbol, plastic, 3.17" wide
Ampeg plastic "a" logo (mounting centers: 2 1/4" x 2 3/8")
Please Log In to view prices
Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
package of 25
Please Log In to view prices
Hardware - Fender, Screws & T-Nuts for Handle
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
package of 5
Please Log In to view prices
Handle - Black plastic strap, Nickel end caps
Black plastic handle with nickel end caps. Screws are not included.
Please Log In to view prices
Handle - black strap, Diamond Pattern
Vox style black plastic handle with diamond pattern and brackets. Center to center measurement is 6 1/4".
See S-H105 for compatible screws and T-nuts.
Please Log In to view prices
Foot - Rubber, 1.5" x .75", with Steel Washer
High quality large rubber feet with steel washer inserts. These feet are made of a durable textured rubber. The diameter is 1.5” and the height is .75”.
package of 4
Please Log In to view prices
Handle Latch - Ampeg, Suitcase Flip Top
Replacement latch for Ampeg Flip Top. For use with P-H300-TOP.
All rivets and top completely covered. Top has one hole, and projections which bite into the material to prevent turning. With one finger the lever is raised to the vertical, - let go, and it pops open. Surface mounting.
Please Log In to view prices
Nut - Fender, Hex Type, for Potentiometers
Hex nut for Fender® potentiometers. Package of 12.
package of 12
Please Log In to view prices
Handle - Fender Style, Black strap, Black Metal Caps
Replacement handle for Fender® and other amps (8.27" from mounting center to mounting center). The rubber handle is steel reinforced with steel angular end caps. Mounting hardware sold separately.
Please Log In to view prices
Indicator Light - for Marshall, Red Square, 120V
Indicator light, square. 120 Volts. Measures: 0.47" Length x 0.47" Width x 0.09" Depth (3/8" mounting hole)
Please Log In to view prices
Fuse Holder - 3AG-Type, Tweed Style, Solder Lug
Panel mount 3AG fuse holder with solder lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
Please Log In to view prices
Dial Lamp - #47, T-3-¼, 6.3V, 0.15A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. The #47 bulb is the most common replacement light used today. Used on the vast majority of Fender amps and many others as well.
package of 10
Please Log In to view prices
Screw - #6 x ¾", Pan Head, Stainless Steel
Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
package of 12
Please Log In to view prices
Handle - Pocket, Black, Plastic, Recessed for Cabinet
Black pocket handle for cabinets. These recessed handles are made of a thick and durable plastic. They sit nearly flush to the side of a cabinet for a clean look that still provides a solid grip when carrying the cabinet.
Please Log In to view prices
Foot - Rubber, 1" x .56", with Steel Washer
High quality small rubber feet with steel washer inserts. These feet are made of a durable rubber. The diameter is 1” and the height is .56”.
package of 4
Please Log In to view prices