Amplifier Parts

Panel - Yellow Zinc, replacement for Marshall JCM800
Back metal panel used on Marshall JCM800, the British Style 800, and the British Style 900 series amps. 27" x 7.125".
Please Log In to view prices
Foot - Rubber, 1.5" diameter x 1.9" tall, with metal washer
1 ½" diameter x 1 3/16" high with metal washer. Sold individually.
Please Log In to view prices
Fuse Cap - PCB Mounting, Universal, GMA
PCB Mount Fuse Cap.
  • 1.31” x 0.42”
  • Takes GMA sized fuse
Please Log In to view prices
Piggyback Hardware - Fender, Bushings
Package of 2
Pure Vintage Piggyback Bushings
  • Set of two chrome-plated bushings used to mount "piggyback"-style amplifier heads to amplifier cabinets
  • Internally threaded to accept piggyback thumbscrews (sold separately)
  • Introduced on Blonde and Blackface™-era amplifiers
  • Used on Tone Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
Please Log In to view prices
Amp Cover - Marshall, for Slant 4x12 Cabs (Not 1960TV)
Genuine Marshall cabinet cover. Fits slant 4 X 12 cabinets except the 1960TV.
Height- 30"
Width-30"
Top Depth-11.5"
Bottom Depth-14.5"
Please Log In to view prices
Fuse Set - Fast and Slow Blow, 0.25" x 1.25", 8 types, 20 each
Package of 160
Fuse kit, fast and slow blow. Contains the following fuses:
  • 20x Slo-Blo, 2 Amp F-Z3AG-S2
  • 20x Slo-Blo, 3 Amp F-Z3AG-S3
  • 20x Slo-Blo, 1 Amp F-Z3AG-S1
  • 20x Slo-Blo, 4 Amp F-Z3AG-S4
  • 20x Slo-Blo, 5 Amp F-Z3AG-S5
  • 20x Fast-Blo, 2.5 Amp F-Z3AG-F2D5
  • 20x Fast-Blo, 1 Amp F-Z3AG-F1
  • 20x Fast-Blo, 3 Amp F-Z3AG-F3
Please Log In to view prices
Handle - Marshall, Black Metal, for 1960HW
Black, steel side handle for Marshall 1960AHW and 1960BHW (hand wired) cabinets.
Please Log In to view prices
Corner - Marshall, Black Plastic, 3-Hole, Single Corner
Three hole genuine Marshall corners most often used on fronts of heads and cabinets. These corners are sold individually. Mounting rivets sold separately.
For sets of four with uncluded rivets, see P-H1091.
Please Log In to view prices
Dial Lamp - #81, G-6, 6.5V, 1.02A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Sold individually.
Please Log In to view prices
Handle - Marshall Style, Black Vintage, Silver Ends, Large
Large Marshall style, vintage type large plastic handle with silver ends. Caps sold separately.
Please Log In to view prices
Amp Cover - For Marshall Slant 4x12 Cab, Black
Vintage style using only the finest tolex available.
  • Height: 30"
  • Width: 30"
  • Depth: 14.5"
Please Log In to view prices
Panel - aluminum, front, for Super Reverb
Basic front panel for Super Reverb. Material is .032" aluminum.
Please Log In to view prices
Indicator Lamp Jewel Kit - 8 colors, 5 of each, 40 total pieces
Package of 40
40 piece kit of indicator lamp jewels. Contains five of each color:
  • Red
  • Purple
  • Green
  • Violet
  • Amber
  • Clear
  • Blue
  • White
Please Log In to view prices
Faceplate - Marshall, 1960 Classic plate
Original Marshall™ 1960 Classic plate
  • Fits 1960AC and 1960BC cabinets
  • Black on gold
  • 29 x 85mm
  • Adhesive backing

Not for resale. For repair or replacement only.
Please Log In to view prices
Amp Cover - Fender®, for '59 Bassman
For '59 Bassman, Blues Deville 410 (fits all), brown. Dimensions: Height: 22" Width: 23 ½" Depth: 10" top, 11" bottom
Please Log In to view prices
Piggyback Hardware - Fender, Clip Bars
Package of 2
Pure Vintage Piggyback Clip Bars
  • Set of two chrome-plated clip bars used to mount "piggyback"-style amplifier heads to amplifier cabinets
  • Includes all mounting hardware, including tee nuts, ribbon springs and mounting screws
  • Introduced on Blonde and Blackface™ era amplifiers
  • Used on Tone-Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures
Please Log In to view prices
Amp Cover - Marshall, for Straight 4x12 Cabs
Fits straight 4 X 12 cabinets.
Vinyl Cover for Marshall 1960B Straight-front Cabinet, with Piping and Marshall Logo
Please Log In to view prices
Snubber Kit - eliminate fuzz from amplifier
Snubber parts kit for circuits. Used to build a "snubber circuit" to remove unwanted high frequencies and high voltages resulting from output transformer ringing in a guitar amplifier, without the "brick wall" effect of using diodes.
Please Log In to view prices
Replacement Fuse Holder Cap - For P-SP2-500
Fuse holder cap replacement for P-SP2-500 power receptacle.
Please Log In to view prices
Capacitor Cover - Fender®, for Bassman
Capacitor cover for Fender® Bassman. Mounting center are 5" x 3". Measurements are 5" x 3" x 1 ½".
Please Log In to view prices
Fan - 115V, AC ~\frac{50}{60}~ Hz, 1 Phase, low noise
Super low noise 115V-AC. Dimensions are 4 11/16" (height) x 4 11/16" (width) x 1 ½" (depth). The distance between mounting centers is 4 1/8" x 4 1/8".
Please Log In to view prices
Caster - Peavey, Pop Out Swivel set
Package of 4
Peavey Pop Out Swivel Caster Set
  • Allows you to remove wheels when necessary
  • Four recessed mounting brackets, four ball-bearing swivel wheels and twelve black anodized Phillips wood screws are included
  • Caster has maximum load capacity of 80 lbs
  • Clam shell packaging
  • Weight Unpacked: 2.07 lb(0.94 kg)
  • Weight Packed: 2.19 lb(0.993 kg)
  • Width Packed: 5.875"(14.9225 cm)
  • Height Packed: 9"(22.86 cm)
  • Depth Packed: 2.875"(7.3025 cm)
Please Log In to view prices
Vibrapod Cone - 25 lb Support, Can Use with Vibrapods
Vibrapod Cones
  • Double truncated vinyl cone with 7/16 stationary chrome ball (it does not roll).
  • 1" tall by 1 5/8" diameter. 25 lbs maximum weight each.
  • Designed for use with Vibrapod isolators or by themselves.
  • Suitable for CD, DVD, DSS Receivers, DAC's, Pre amps, Amplifiers, Integrateds, Turntables, Speakers

Inherent vibrations degrade the sound quality of your audio/video system. VIBRAPOD Isolators were designed to isolate your components from vibration in both the horizontal and vertical planes. VIBRAPOD Cones work best in the vertical plane, however when combined with VIBRAPOD Isolators they enhance isolation in the horizontal plane. You will notice an extended, more defined bass, improved imaging and sound stage, greater dynamics and detail, plus sharper video images. VIBRAPOD Isolators and Cones should be placed under flat areas of the component with more at or near the heaviest areas and at the edges.
Please Log In to view prices
Amp Cover - Fender, For Blues Jr., Brown
Protect your investment with a fitted Genuine Fender amplifier cover. Designed to fit your Blues Jr. and Blues Jr III perfectly.
  • Brown nylon cover
  • Designed to fit Blues Junior™ and Blues Junior™ III amplifiers (1996-present)
  • Height: 16" (40.64 cm)
  • Width: 18" (45.72 cm)
  • Depth: 9.18" (23.31 cm)
Please Log In to view prices