Amplifier Parts

PCB Mount Fuse Cap.

• 1.31” x 0.42”
• Takes GMA sized fuse

Round metal handle with 5" mounting centers and 1.5" height. These handles are great for amplifiers, rackmount gear, and guitar pedals. Mounting screws and lock washers are included. Features

• Made of round steel
• 2 Screws - Panhead 10-32 x 1/2"
• 2 Internal Tooth Lockwashers

Replacement handle for Fender®, Peavey®, and other amps (8.25" from mounting center to mounter center). The rubber handle is steel reinforced with steel straight end caps. Mounting hardware sold separately.
See P-H261B for angular end caps.

300mm x 56mm tagboard with two rows of 28 tags. Each connector features two lugs, one facing inward and one facing outward. This can be helpful when connecting components using the inner lugs which leaves the outside lugs open for wiring. A center row of holes can be used for running wires beneath the board as well as for standoffs.

Package of 10. Long life general replacement lamps for dials, indicators, etc.

Plastic IEC C14 connector for power entry. This power receptacle mounts with two screw holes which are counterunk for a clean look when using countersunk screws. This is a 3 prong connector for power cables with ground connections. Internal connections can be soldered into place or used with quick disconnects. See Specifications, Files, and Documents for a datasheet with dimensions and panel cut out sizing.

Pure Vintage Amplifier Handle (2-screw mount)

• Black amplifier handle with vinyl sleeve over steel strap and two-screw end caps
• Includes mounting hardware (four screws and T-nuts)
• Used on Cyber Twin, Cyber Twin SE, Cyber Deluxe, Stage™ series, Deluxe 90 DSP/900, Ultimate Chorus™, Princeton 65 DSP, '65 Twin Custom®, '94 (Evil) Twin®, "The Twin", Deluxe VM, Bandmaster VM Head, Steel King, and Bassman® 300 amplifiers
• 8" center to center. 9 ¼" handle length without end caps.

Steel 20mm screw nails for corners, logos, badges, and more. These screw nails make adding cabinet accessories easy requiring only a mallet for installation. The design is great for speaker cabinets ensuring a better grip than standard nails and tacks under extreme vibrations.

Black metal, 2 hole with lip, radius ½". Sold individually.

Vintage style using only the finest tolex available.

• Height: 11"
• Width: 30"
• Depth: 9"

Turrets for use on boards measuring 3mm thick, such as P-HTUR-189-3BK or P-HTUR-189-3R. For 2mm boards, see S-HTUR-SG-2X
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

Set of four, black, synthetic rubber feet. Molded from one piece with a textured no-slip surface.

Imperial threaded hex nuts made of solid brass. These brass hex nuts visually match the nuts found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. These will also work well in many other types of projects. Pairs with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws. S-HLWX-B lock washers and S-HBWX flat washers are also available.

Vintage strap. Large, black with black caps. Includes:

• 2 × Countersunk screws - M5 x 0.8, overall length of 25 mm
• 2 × Mounting brackets
• 2 × Black "Marshall" bracket covers
• 1 × Rubber handle with metallic insert

Though-hole PCB mount fuse holder used on many Marshall amps such as the 900 series and some 2000 series amps. The fuse cap is sold separately as S-H204. Fits GMA and GMD 5×20mm fuses.

Long life general replacement lamps for dials, indicators, etc.

#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.

Retro fit for Fender, Molded dogbone style. 6" center to center. Replacement for Fender: 099-0946-000. For handle mounting hardware, see part number S-H105.

Pure Vintage Piggyback Bushings

• Set of two chrome-plated bushings used to mount "piggyback"-style amplifier heads to amplifier cabinets
• Internally threaded to accept piggyback thumbscrews (sold separately)
• Introduced on Blonde and Blackface™-era amplifiers
• Used on Tone Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures

High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.

• 3mm size
• Water clear
• High brightness
• Multiple colors available
• Package of 5

PCB mount terminal pin made of tinned brass. This pin fits 0.064” mounting holes and can be swage or solder mounted. The pin diameter is 0.05” and has a total length of 0.25” when mounted. Great for connecting offboard wiring by soldering directly to the pin or using an appropriate connector.

High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A and S-H105). Center to center measurement is 6-½".

258 x 76 mm, loaded with 52 turrets, 3 mm board thickness. This is designed for a for a JTM45 board. Our turrets, part number S-HTUR-BX will fit on this board.

Package of 10. Long life general replacement lamps for dials, indicators, etc. Sold in package of 10 bulbs.