Amplifier Parts

2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.

#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.

2-leg notched, black, wraparound. 18 gauge steel, ½" radius. Sold individually.

#6 x 1” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Fender® tweed amps to secure the back panels. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

#3 x ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Gibson® truss rod covers.

High quality snap-in IEC C14 power entry connector. The connector is easy to install and is rated for 250VAC at 15A. The quick disconnect terminals can also be directly soldered to. Features:

• High quality thermoplastic housing
• Copper alloy terminals (4.8mm width)
• Quick installation
• Fits 0.8mm to 2mm thick panels

Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10

3-leg black, standard. 18 gauge steel, ½" radius. Sold individually.

18-8 stainless steel sheet metal screws with blunt tips. These pan head #8 screws have a length of 3/8” and are commonly used to secure the fiberboard, capacitor pan, and other hardware to the chassis of blackface and silverface amps. For the smaller #6 blunt tip machine screws found in vintage Fender® amps, see S-HBS6-516.

Long life general replacement lamps for dials, indicators, etc. Sold individually.

I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses

Silver cap for Marshall vintage style handles. Sold individually.

Vintage style service information label. This label has a line for the name of a tech or service company, contact information, and the date of service. This sticker is a great way to provide service info with a professional presentation on the chassis of a pedal or amp.

1" Oval head, Phillips screw with matching M4 threaded t-nut. (package of 4)

Vintage style quality assurance label. This label has an electronic test line for the name of a technician responsible for testing the electronics and a sound test line for the name of a technician responsible for testing the functionality of the device. This sticker is a great way to document quality assurance testing with a professional presentation on the chassis of a pedal or amp.

Phillips pan head machine screw, 1 x 30. Designed to go through a pre-tapped hole or nut to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Generic amplifier chassis straps. Mounting hardware sold separately. Sold individually.

18-8 stainless steel sheet metal screws. These flat head #10 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for AC power cables used in vintage Fender® blackface and silverface combo amps. For the smaller #8 screws often used with reverb cables, see S-HFS8-34.

#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.

#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.

1 ½" diameter x ¾" high with metal washer. Sold individually.

Turrets for use on boards measuring 2mm thick. For 3mm boards, see S-HTUR-SG-3X
Stake and anvil required for mounting.

• Staking Tool is our part number: S-T1715
• Anvil is our part number S-T1717
• For a budget tool set see S-T-STAKE-SET

Vulcanized Fiberboard, used for laying out circuits using eyelets such as S-HEYE-A and our staking tool S-T1715.

• .062" thick
• 3" x 15"

6-32 Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 6-32 size works in place of original M3.5 screws that were used for the rotary selector switches, octal sockets, capacitor clamps, and chokes. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.