Amplifier Parts

Covers - for Chassis Socket Hole, Steel
Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR
  • 9 pin (noval) socket hole cover
  • 5mm x 3.5mm mounting holes
  • 27.1mm center to center

P-ST8-CVR
  • 8 pin (octal) socket hole cover
  • 6.5mm x 3.5mm mounting holes
  • 40mm center to center

P-ST8-ST9-CNVRT
  • 8 pin to 9 pin (octal to noval) socket adapter
  • Bottom mount 9 pin socket recommended
Please Log In to view prices
Strain Relief - for ¾" x ~\frac{27}{32}~" hole, ~\frac{5}{16}~" cord diameter
16/3 SJT, 5/16" cord diameter. These one piece Strain Relief Bushings securely anchor, absorb, and protect cables and wires from push/pull and twist forces, while insulating them from irregular or sharp panel edges. They are easily and quickly installed with special installation pliers or other hand or production tools. Black H.S. Nylon, and the temperature index is 105° Centigrade.
Please Log In to view prices
Fuse Block - for 3AB and 3AG fuses, low profile
Open frame fuse holder with patented self-aligning, snap-in terminal clips. A low profile fuse block featuring individual barriers which reinforce the fuse clips while providing greater protection against clip damage and electrical shock. The uniqu design permits self-alignment of clips to fuse cap. This, plus a one-piece clip / terminal assures low contact resistance. Higher current ratings have been attained using spring brass clips.
Please Log In to view prices
Optocoupler - XVive, VTL5C1, Vactrol, for Channel Switching
VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.
Please Log In to view prices
Corner - Steel, 3-Hole, 20 Gauge, for cabinets
11mm / 7/16" Radius, 20 Gauge Steel (Sold individually)
Please Log In to view prices
Indicator Light Clip - Marshall, for securing lights
Clip for square Marshall indicator lights - used to secure the indicator lights in place
Please Log In to view prices
Foot - Rubber, 1.5" x .75", with Metal Washer
1 ½" diameter x ¾" high with metal washer. Sold individually.
Please Log In to view prices
Washer - Rubber, Chassis Mount, ⅞" Diameter
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. Allows proper dial centering in cabinet opening. Overall dimensions 0.875" dia. x .233" thick.
Please Log In to view prices
Handle - Ampeg Style, Black Vintage, Black Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
Please Log In to view prices
Optocoupler - Xvive, Vactrol, VTL5C Series
High quality vactrols from Xvive. The Xvive vactrols are clones of the original Excelitas / Perkins-Elmer vactrols used in many effects pedals, synthesizers, compressors and other equipment. These vactrols feature a thick epoxy sealed casing. The VTL5C3 and VTL5C3/2 both have a steep slope, good dynamic range, a very low temperature coefficient of resistance, and a small light history memory.
Please Log In to view prices
Handle - Fender, Vinyl, Silver Caps, 1 screw per cap
Colors Available:
Pure Vintage Amplifier Handle (1-screw mount). Vintage style amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps. Includes mounting hardware (two screws and T-nuts)
Please Log In to view prices
Chassis Strap - Fender, vintage amplifier
Package of 2
Multiple sizes available to fit any amplifier. Contains two straps and mounting hardware. Original Fender packaging.
Please Log In to view prices
Caster - Marshall, 2", with socket, for cabinets
Original Marshall caster and socket with a black wheel having 50mm diameter x 20mm width. Used on 1960A, 1960B and other cabinets. Package of one includes four mounting screws. Caster screws into black plastic socket base.
Please Log In to view prices
Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
Please Log In to view prices
Corner - Black Plastic, 4-Hole, Replacement for Vox / Orange
These Tube Amp Doctor black plastic corners are great replacements for Vox® and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.
Please Log In to view prices
Handle - Black plastic strap, Nickel end caps
Black plastic handle with nickel end caps. Screws are not included.
Please Log In to view prices
Handle - Black Metal, Recessed for Cabinet
Recessed black metal handle for installation in cabinets
Please Log In to view prices
LED - 3mm, Water Clear, High Brightness, Package of 5
Package of 5
Colors Available:
High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.
  • 3mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5
Please Log In to view prices
Handle - Fender Style, Strap, 6.5” Spacing
Colors Available:
High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A and S-H105). Center to center measurement is 6-½".
Please Log In to view prices
Handle Cap - Marshall Style, for Vintage Handle
Gold cap for vintage handle as used on Marshall JCM800 and others. Sold individually. Fits handle P-H295 and inner clamp P-H295-CMP.
Please Log In to view prices
Receptacle - AC, Mates with S-W123 & S-W124 with Fuse Holder
I.E.C. Power Cord Receptacle. Mates with power cords S-W123 and S-W124. Rated for 6A, 250V. UL listed. Compatible with GMA fuses
Please Log In to view prices
Foot - Rubber, ⅜" height x ~\frac{15}{16}~" diameter
Package of 4
Package of 4 rubber feet (15/16" diameter x ⅜" height) mounting hole is good for #6 screws.
Please Log In to view prices
LED - 5mm, Water Clear, High Brightness, Package of 5
Package of 5
Colors Available:
High brightness 5mm LED. Great for use in pedal and amp builds as well as other applications where a bold, bright, indicator is needed. Multiple colors available.
  • 5mm size
  • Water clear
  • High brightness
  • Multiple colors available
  • Package of 5
Please Log In to view prices
Corner - Peavey, Black Steel, 2-Hole, Lip
Black metal, 2 hole with lip, radius ½". Sold individually.
Please Log In to view prices