Amplifier Parts

Black polyester amplifier cover for '65 Twin Reverb Reissue, black. Designed to fit '65 Twin Reverb® Reissue amplifiers (1992-present)

#6-32 x ⅝” slotted drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on early Telecaster® guitars including the Nocaster® and Esquire® guitars.

Package of 10. Long life general replacement lamps for dials, indicators, etc.

Vintage amplifier-style leather strap handle. Includes two mounting brackets.

Capacitor cover for Fender® Bassman. Mounting center are 5" x 3". Measurements are 5" x 3" x 1 ½".

Vintage Marshall style vent material. This gold plated metal mesh is sourced from the UK factory used by Marshall. These vents look great on Plexi head cabinet builds such as the JTM45 and 1959 amplifiers. Top Vent Dimensions (P-VENT-MT)

• 20.75 in. x 2.75 in.

Back Vent Dimensions (P-VENT-MB)

• 24 in. x 5 in.

New-old-stock Soviet fuse holders. These panel mount holders fit 5x20mm GMA and GMD type fuses. A 0.625” mounting hole is required. Note: A small 0.1” notch must either be filed into the 0.625” mounting hole or filed off of the fuse to flush mount with a panel

Original Marshall™ '100' logo.

• Fits 1960HW cab
• Gold lettering on white plastic.

This logo is the 3-pin version:

• Center to center pin spacing between the first two digits = 15/16''
• Center to center pin spacing between the second two digits = 1''

Not for resale. For repair or replacement only.

For 1993 Super, 2001 Super Reverb (fits all). Fits the 2001 reissues and the original 60s amps. It might not fit on all the 70s versions. Dimensions: Height: 24" Width: 25" Depth: 9" top, 10 ½" bottom

Though-hole PCB mount fuse holder used on many Marshall amps such as the 900 series and some 2000 series amps. The fuse cap is sold separately as S-H204. Fits GMA and GMD 5×20mm fuses.

#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on Fender® guitars such as Stratocasters® and Telecasters®.

Package of 10.

Metal lift-off hinge. 0.17" mounting hole diameter for use with #8 screws.

Genuine Marshall cabinet cover. Fits slant 4 X 12 cabinets except the 1960TV.
Height- 30"
Width-30"
Top Depth-11.5"
Bottom Depth-14.5"

Vintage style AA battery orientation label. This label matches the size and style of those found in original FZ-1 fuzz pedals. It is a great option for replica style builds or other vintage inspired effects.

Pure Vintage Piggyback Bushings

• Set of two chrome-plated bushings used to mount "piggyback"-style amplifier heads to amplifier cabinets
• Internally threaded to accept piggyback thumbscrews (sold separately)
• Introduced on Blonde and Blackface™-era amplifiers
• Used on Tone Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures

Vintage style using only the finest tolex available.

• Height: 17"
• Width: 25"
• Depth: 9.5"

Protect your investment with a fitted Genuine Fender amplifier cover. Designed to fit your Blues Jr. and Blues Jr III perfectly.

• Blank brown nylon cover
• Designed to fit Blues Junior™ and Blues Junior™ III amplifiers (1996-present)
• Height: 16" (40.64 cm)
• Width: 18" (45.72 cm)
• Depth: 9.18" (23.31 cm)

Though-hole PCB mount fuse holder used on many Marshall® JCM2000 series such as the TSL100, TSL122, DSL50, and DSL100 as well as other amps. Check footprint and dimensions for compatibility. This holder fits 3AG fuses and pairs with the S-H212 cap. Cap sold separately.

Package of 10. Long life general replacement lamps for dials, indicators, etc. Sold in package of 10 bulbs.

Vintage style using only the finest tolex available.

• Height: 29"
• Width: 30"
• Depth: 14"

For '59 Bassman, Blues Deville 410 (fits all), brown. Dimensions: Height: 22" Width: 23 ½" Depth: 10" top, 11" bottom

#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.

Pure Vintage Piggyback Clip Bars

• Set of two chrome-plated clip bars used to mount "piggyback"-style amplifier heads to amplifier cabinets
• Includes all mounting hardware, including tee nuts, ribbon springs and mounting screws
• Introduced on Blonde and Blackface™ era amplifiers
• Used on Tone-Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures