Amplifier Parts

Dial Lamp - #51, G-3-½, 7.5V, .22A, Bayonet Base
Long life general replacement lamps for dials, indicators, etc. Very commonly found in RCA radios.
package of 10
Please Log In to view prices
Corner - Gloss Black Plastic, 3-Hole, ½” Radius
Corner made of black plastic with a glossy surface. These corners feature ½” radius and three mounting holes. These corners are a great option for amplifier cabinets and other equipment.
Please Log In to view prices
Screw - #3 x ⅜”, Phillips, Round Head, Sheet Metal, Nickel-plated
#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used to secure Kluson and Kluson style tuners as well as string trees on Fender® guitars.
package of 7
Please Log In to view prices
Logo - Marshall, Gold, 100, for cabinets
Original Marshall™ '100' logo.
  • Fits 1960HW cab
  • Gold lettering on white plastic.

This logo is the 3-pin version:
  • Center to center pin spacing between the first two digits = 15/16''
  • Center to center pin spacing between the second two digits = 1''

Not for resale. For repair or replacement only.
Please Log In to view prices
Tube Stabilizer - Fender®, Hot Rod Series
Replacement foam tube stabilizer for Fender® Hot Rod Deluxe and Hot Rod Deville amps. This foam block slides over the first two preamp tubes. This genuine Fender® replacement is made in the USA.
Please Log In to view prices
Fuse Holder - 3AG-Type, Tweed Style, Right Angle Spade Lug
Panel mount 3AG fuse holder with spade lug connectors. This fuse holder matches the style of vintage tweed amps and is a great replacement for original amps or new builds. Mounting nut and rubber washer included.
Note: The spade lugs have a detent rather than a hole.
Please Log In to view prices
Screw - 8-32 x ½”, Phillips, Round Head, Machine, Brass
8-32 x ½” Phillips round head machine screws made of solid brass. These brass round head screws visually match the screws found on vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The 8-32 x ½” size works in place of original M4.5 screws that were used for mounting the power and output transformers. These will also work well in many other types of projects. Brass round head screws are available in the following sizes: Diameter/TPI SKU 4-40 S-HSB4-X 6-32 S-HSB6-X 8-32 S-HSB8-12 Pairs with S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.
package of 5
Please Log In to view prices
Screw - 1", Flat top Phillips, Stainless Steel
1" stainless steel Phillips head, flat top screw.
package of 4
Please Log In to view prices
Fuse Holder Cap - 3AG, Slotted, for Marshall 2000 Series
Fuse holder cap for the fuse holder found on the Marshall® JCM2000 series such as the TSL100, TSL122, DSL50, and DSL100 as well as other amps. This cap fits 3AG fuses and pairs with S-H211.
Please Log In to view prices
Hardware - Fender, Screws & T-Nuts for Handle
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
package of 5
Please Log In to view prices
Faceplate Mount - Marshall, Cabinet Logo Frame
Original Marshall™ cabinet logo frame. This mounts to original Marshall™ cabinets using two screws. The adhesive backed badge is then adhered to this frame.
  • Fits 1960 cabinets
  • Black plastic
  • For 29 x 85mm logos
  • Screw mount

Note: Faceplates sold separately.
Faceplates sold separately.
Please Log In to view prices
Handle - Ampeg Style, Blue Vintage, White Stitching
Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.
Please Log In to view prices
Hardware - Top for Suitcase Type Latch
Suitcase Type Latch Top. The top is flat with two holes completely hidden. Mates with P-H300.
Please Log In to view prices
Screw - #4 x 1 ¼”, Phillips, Round Head, Wood, Nickel-plated
#4 x 1 ¼” Phillips drive wood screws made of nickel plated steel. This style of round head screw is commonly used on Fender® bass pickups, Telecaster® pickups mounted directly to the body, and some P90 pickups.
package of 5
Please Log In to view prices
Screw - #4 x ½”, Slotted, Oval Head, Wood, Nickel-plated
#4 x ½” slotted drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on early Telecaster® pickguards including the Nocaster® and Esquire® guitars.
package of 5
Please Log In to view prices
Dial Lamp - #41, T-3-¼, 2.5V, .50A, Screw Base
Package of 10. Long life general replacement lamps for dials, indicators, etc.
package of 10
Please Log In to view prices
Insulation Cover - Fuse Holder, 15.5 x 36.8mm, PVC
High quality insulation cover for panel mount fuse holders. The cover is made of a thick durable PVC and fits many fuse holders. The wire sleeve can securely fit over any standard wire gauge used with fuse holders providing a fully insulated fuse connection.
Features
  • Provides insulation against shock on rear of fuse holder
  • PVC
  • UL94V-0 rated flame retardant material

Fits S-H205
Please Log In to view prices
Handle - Leather amplifier-style strap with mounting hardware
Colors Available:
Vintage amplifier-style leather strap handle. Includes two mounting brackets.
Please Log In to view prices
Faceplate - Marshall, 1960 Vintage plate
Original Marshall™ 1960 Vintage plate
  • Fits 1960AV and 1960BV cabinets
  • Black on gold
  • 29 x 85mm
  • Adhesive backing

Not for resale. For repair or replacement only.
Note: Frame sold separately.
Please Log In to view prices
Amp Cover - Replacement for Fender® Princeton Reverb
Vintage style using only the finest tolex available.
  • Height: 16"
  • Width: 20.5"
  • Depth: 9"
Please Log In to view prices
Turret Board - Black, 2mm, 5F6A Layout, 2 pcs
Turret board with pre installed turrets designed to be used to build a 5F6A layout or variants. Includes the required 2 pieces
  • 2mm board
  • 5F6A Layout
  • Includes 2 pieces
package of 2
Please Log In to view prices
Label - Quality Assurance, Vintage Style Sticker
Vintage style quality assurance label. This label has an electronic test line for the name of a technician responsible for testing the electronics and a sound test line for the name of a technician responsible for testing the functionality of the device. This sticker is a great way to document quality assurance testing with a professional presentation on the chassis of a pedal or amp.
Please Log In to view prices
Label - 4-Band Resistor Color Code Chart
Two inch wide sticker featuring the 4-band resistor color code chart. This sticker is a great reference when checking resistor values using the color codes. It is easy to read but small enough to place on a workbench, tool box, organizer, or even a soldering station.
Please Log In to view prices
Amp Cover - For Fender Vintage Silverface Champ
Vintage style using only the finest tolex available.
  • Height: 14"
  • Width: 17"
  • Depth: 7"
Please Log In to view prices