Amplifier Parts

For '59 Bassman, Blues Deville 410 (fits all), brown. Dimensions: Height: 22" Width: 23 ½" Depth: 10" top, 11" bottom

Genuine Ampeg™ Script Logo made of metal for installation on amplifiers.

Capacitor cover for Fender® Twin Reverb. Mounting centers are 7 1/8" x 3.5". Measurements are 7 1/8" x 3 ½" x 1 ¼".

For 1993 Super, 2001 Super Reverb (fits all). Fits the 2001 reissues and the original 60s amps. It might not fit on all the 70s versions. Dimensions: Height: 24" Width: 25" Depth: 9" top, 10 ½" bottom

Original Marshall caster and socket with a black wheel having 50mm diameter x 20mm width. Used on 1960A, 1960B and other cabinets. Package of one includes four mounting screws. Caster screws into black plastic socket base.

Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.

Vintage Marshall style vent material. This gold plated metal mesh is sourced from the UK factory used by Marshall. These vents look great on Plexi head cabinet builds such as the JTM45 and 1959 amplifiers. Top Vent Dimensions (P-VENT-MT)

• 20.75 in. x 2.75 in.

Back Vent Dimensions (P-VENT-MB)

• 24 in. x 5 in.

Original VOX™ large logo.

• Fits AC30
• Gold, plastic logo.
• 34mm height x 107mm length

Pure Vintage Piggyback Bushings

• Set of two chrome-plated bushings used to mount "piggyback"-style amplifier heads to amplifier cabinets
• Internally threaded to accept piggyback thumbscrews (sold separately)
• Introduced on Blonde and Blackface™-era amplifiers
• Used on Tone Master® 212, Super-Sonic™ 212 and Super-Sonic 60 speaker enclosures

Black, steel side handle for Marshall 1960AHW and 1960BHW (hand wired) cabinets.

Vintage amplifier-style leather strap handle. Includes two mounting brackets.

Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.

• Genuine Fender® tweed amp logo
• Mounting pins included
• Designed for
  
  • Pro Junior™
  • Blues Junior™
  • JazzMaster™ Ultralight
  • plus others

Fender part number: 099-409-6000

Turret board with pre installed turrets designed to be used to build a 5F6A layout or variants. Includes the required 2 pieces

• 2mm board
• 5F6A Layout
• Includes 2 pieces

Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.

Vintage Ampeg style amp handle, center to center measurement is 7 3/8".
See S-H105 for compatible screws and T-nuts.

General purpose square aluminum handle. 7.6" by 1.6".

Basic front panel for Super Reverb. Material is .032" aluminum.

Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.

• Genuine Fender Blackface amplifier logo
• Mounting screws included
• Designed for Super-Sonic™ series, ’94 Twin-Amp™, Pro Reverb™, Prosonic™, Concert Reverb™, ’65 Twin Reverb®, ’65 Deluxe Reverb®, ’65 Super Reverb®, Machete™, ’65 Princeton® Reverb, ’64 Vibroverb™, ’68 Custom Princeton, ’68 Custom Twin Reverb, ’68 Custom Deluxe Reverb, Steel King, Jazz-King™, Cyber Twin®, VM series, Princeton Recording Amp, Bassman® Pro series, Stage™ 1000, Deluxe™ 900 and Princeton 650 amplifiers plus others.

Revive the look of your vintage-style or modern Fender amp with a genuine Fender amplifier logo.

• Genuine Fender® flat black amplifier logo
• Mounting screws included
• Designed for Bassman® series, Super-Sonic™ series and Vibro-King® series amplifiers plus others

Measurements:

• Bottom Horizontal Mounting Holes Center-To-Center : 4.14” (150.1mm)
• Top Horizontal Mounting Holes Center-To-Center : 3.18” (81.9mm)
• Vertical Mounting Holes On “F” Center-To-Center : 1.98” (50.4mm)
• Vertical Mounting Holes On “R” Center-To-Center : .98” (24.9mm)

258 x 76 mm, loaded with 52 turrets, 3 mm board thickness. This is designed for a for a JTM45 board. Our turrets, part number S-HTUR-BX will fit on this board.

Black/gold, vintage Marshall style handle. Gold end caps and inner clamps included. Mounting screws not included

230 x 70 mm, loaded with 33 turrets,2 mm board thickness. This is designed for a 5E3 board.

Thumb screws for piggyback amplifier, used for locking amp heads to cabs. Original Fender.

Pure Vintage Amplifier Handle (2-screw mount)

• Black amplifier handle with vinyl sleeve over steel strap and two-screw end caps
• Includes mounting hardware (four screws and T-nuts)
• Used on Cyber Twin, Cyber Twin SE, Cyber Deluxe, Stage™ series, Deluxe 90 DSP/900, Ultimate Chorus™, Princeton 65 DSP, '65 Twin Custom®, '94 (Evil) Twin®, "The Twin", Deluxe VM, Bandmaster VM Head, Steel King, and Bassman® 300 amplifiers
• 8" center to center. 9 ¼" handle length without end caps.