Cord - Power, 16 AWG, 3 Conductor, Black
Power Cord / cable - (3 conductor) Bare End, 16 AWG
Strain Relief - Nylon, 0.12" x 0.22" Wire (SPT-1)
Two conductor, nylon, .12" x .22" wire (SPT-1). Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on flexible power cords. Securely anchors, insulates, and protects cable at panel entry points.
Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Handle - Fender Style, Strap, 6.375” SpacingReplacement handle for tweed style Fender® amps (6.375" from mounting center to mounter center)
LED Bezel - for 3mm LED, used for mounting
Holder for mounting LEDs to panels.
Corner - Black Steel, 2-Hole, 18 Gauge, Wraparound, Lip
2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.
Covers - for Chassis Socket Hole, Steel
Steel plates for covering unused socket holes on modified chassis. These covers provide a safe solution for modifying any chassis. These covers use elongated mounting holes to fit a variety of socket hole sizes. P-ST9-CVR
- 9 pin (noval) socket hole cover
- 5mm x 3.5mm mounting holes
- 27.1mm center to center
- 8 pin (octal) socket hole cover
- 6.5mm x 3.5mm mounting holes
- 40mm center to center
- 8 pin to 9 pin (octal to noval) socket adapter
- Bottom mount 9 pin socket recommended
Indicator Light Clip - Marshall, for securing lights
Clip for square Marshall indicator lights
Washer - Rubber, Chassis Mount, ⅞" Diameter
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. Allows proper dial centering in cabinet opening. Overall dimensions 0.875" dia. x .233" thick.
Caster - Marshall, 2", with socket, for cabinets
Original Marshall caster and socket with a black wheel having 50mm diameter x 20mm width. Used on 1960A, 1960B and other cabinets. Package of one includes four mounting screws. Caster screws into black plastic socket base.
Dial Lamp - #44, T-3-¼, 6.3V, .25A, Bayonet Base
Package of 10Long life general replacement lamps for dials, indicators, etc.
Nut - 8-32, Keps with external tooth, zinc
Package of 10Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
Optocoupler - VTL5C1, Vactrol, for Channel Switching
VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.
Foot - Rubber, 1.5" x .75", with Metal Washer
1 ½" diameter x ¾" high with metal washer. Sold individually.
Handle - Fender, Vinyl, Silver Caps, 1 screw per capPure Vintage Amplifier Handle (1-screw mount). Vintage style amplifier handle with vinyl sleeve over steel strap and one-screw mounting nickel-plated end caps. Includes mounting hardware (two screws and T-nuts)
LED - 3mm, Water Clear, High Brightness, Package of 5High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.
Package of 5
- 3mm size
- Water clear
- High brightness
- Multiple colors available
- Package of 5
Fuse - Fast-Blow, 250V, 3AG, 0.25" x 1.25"
Package of 5Protect your expensive investment or hobby with inexpensive fuses.
Chassis Strap - Fender, vintage amplifier
Package of 2Multiple sizes available to fit any amplifier. Contains two straps and mounting hardware. Original Fender packaging.
Foot - Synthetic Rubber, 0.51" Height x 1.60" Diameter
Package of 4Set of four, black, synthetic rubber feet. Molded from one piece with a textured no-slip surface.
Corner - Black Plastic, 4-Hole, Replacement for Vox / Orange
These Tube Amp Doctor black plastic corners are great replacements for Vox® and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.
Handle - Black Metal, Recessed for Cabinet
Recessed black metal handle.
Handle - Black plastic strap, Nickel end caps
Black plastic handle with nickel end caps. Screws are not included.