Amplifier Parts

Contact Pin - Nickel Plated Brass, Seamless, 0.566" Height
0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.
Please Log In to view prices
Fuse Holder - Clip, GMA-Type, PCB Mount
Through-hole PCB mounted fuse holder clips found in Peavey amps and other electronics. These small clips allow for minimal space fuse mourning directly on PCB’s. Fits GMA 5×20mm fuses. A pair is required to mount a fuse. Sold individually.
Please Log In to view prices
Washer - Internal Tooth Lock, Steel, Black Oxide
Black oxide finished steel lock washers that use internal teeth for locking and tension. The internal teeth dig into the screw head or nut while the smooth outside edge won't snag objects. These washers provide greater vibration resistance than split lock washers. Black oxide lock washers like these can be found in vintage Marshall amplifiers. Pairs nicely with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws and S-HBNX nuts.
package of 5
Please Log In to view prices
Wood Tack - Screw Nail, Steel, 20mm
Steel 20mm screw nails for corners, logos, badges, and more. These screw nails make adding cabinet accessories easy requiring only a mallet for installation. The design is great for speaker cabinets ensuring a better grip than standard nails and tacks under extreme vibrations.
Please Log In to view prices
Nut - Hex finished, fine thread, zinc
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
package of 5
Please Log In to view prices
Washer - Type A Narrow, Flat, steel
Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.
package of 5
Please Log In to view prices
Strain Relief - for ~\frac{35}{64}~" x ⅝" Hole, ~\frac{11}{32}~" Cord Diameter
For 35/64" x 5/8" chassis hole, 11/32" cord diameter. Fits most Fender® amps.
  • Protects the lifeline of your electric/ electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.
  • Securely anchors, insulates, and protects cables at panel entry points
Please Log In to view prices
Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
package of 5
Please Log In to view prices
LED Lens - Fresnel, Polycarbonate, 5mm
Colors Available:
Panel mount led lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • ¼” mounting hole
  • For panel thicknesses of 1/16” to ⅛”
  • Fresnel lens
  • Low Profile

For a version that fits 3mm LEDs, see P-L310-X.
Please Log In to view prices
Washer - Internal Tooth Lock, spring steel
Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
package of 5
Please Log In to view prices
Foot - Synthetic Rubber, 0.51" Height x 1.60" Diameter
Set of four, black, synthetic rubber feet. Molded from one piece with a textured no-slip surface.
package of 4
Please Log In to view prices
Replacement Fuse Holder Cap - For P-SP2-500
Fuse holder cap replacement for P-SP2-500 power receptacle.
Please Log In to view prices
LED Lens - Flat Cylindrical, Fresnel, Polycarbonate, 5mm
Colors Available:
Panel mount LED lenses made of high quality polycarbonate. These flat cylindrical lenses provide a unique retro appearance with a small panel footprint and work well in any project using LED indicators. Features:
  • ¼” mounting hole
  • For panel thicknesses of 1/16” to ⅛”
  • Fresnel lens
  • Flat cylindrical shape
  • Fits standard 5mm LEDs
Please Log In to view prices
Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
package of 5
Please Log In to view prices
Foot - Rubber, .875" x .53", with Metal Washer
7/8" diameter x 17/32" high with metal washer. Sold individually.
Please Log In to view prices
Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
package of 5
Please Log In to view prices
Foot - Metal Glide, 0.39" Tall, 2 Screw
Zinc plated cold rolled steel glide. 0.39" height, two 0.18" diameter mounting holes (#8 screws), 1.59" mounting center distance.
Please Log In to view prices
Hardware - Top for Suitcase Type Latch
Suitcase Type Latch Top. The top is flat with two holes completely hidden. Mates with P-H300.
Please Log In to view prices
Eyelets - Brass, .121 x .125 x .200; MT .0095, package of 10
Eyelets, bag of 10 (mounts in 1/8" hole).
package of 10
Please Log In to view prices
LED - 5mm diameter, diffused lens, 5 mCd
Colors Available:
5mm (T-1 ¾) diffused LED’s. Great for use in pedal builds and other applications where a tinted and diffused indicator is needed. Multiple colors available.
  • 5mm size
  • Tinted and diffused
  • Multiple colors available
  • Package of 5
package of 5
Please Log In to view prices
Terminal Pin - PCB Mount, 0.05” Diameter, 0.25” Length
PCB mount terminal pin made of tinned brass. This pin fits 0.064” mounting holes and can be swage or solder mounted. The pin diameter is 0.05” and has a total length of 0.25” when mounted. Great for connecting offboard wiring by soldering directly to the pin or using an appropriate connector.
Please Log In to view prices
Washer - ⅞" x ⅛" Thick, Rubber, Chassis Mount,
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Adhesive backing for lamenating to other washers to increase thickness. Overall dimensions 7/8" dia. x 1/8" thick.
Please Log In to view prices
Eyelets - Plated Brass, Small, .089” x .125” x .150”
Tin plated brass eyelets commonly used on vintage style pickups. The small sized eyelets are also great for smaller point-to-point projects such as DIY stomp boxes. The outside diameter of the barrel is 0.089” and the recommended mounting hole is 0.093” using a #42 drill bit.
package of 10
Please Log In to view prices
Clamp - Speaker Grill Mount, Plastic
Black plastic clamp for mounting speaker grills. Sold individually, mounting hardware not included.
Please Log In to view prices