Amplifier Parts

Corner - Steel, 2-Hole, 18 Gauge, Nickel
Use where total material thickness is 1/2" or more. Works on carpet or vinyl, 18 gauge steel, 1/2" radius. Radius is.50" from the center hole to furthermost edge. Sold individually. See S-H101 for mounting hardware.
Please Log In to view prices
Corner - Steel, 2-Hole, 18 Gauge, ¾" Thickness
Steel, 2-Hole corner. Replacement for Fender® Corner wraps around inside edge of cabinet. See S-H101 for mounting hardware.
  • Works on ¾" of wood + material thickness
  • 18 gauge steel
  • ½" radius
  • For Fender®
  • Sold individually.
Please Log In to view prices
Corner - Black steel, 2-Hole, 18 Gauge, Notched
2-leg notched, black, wraparound. 18 gauge steel, ½" radius. Sold individually.
Please Log In to view prices
Corner - 2-Hole, 20 Gauge, for cabinets
Corner wraps around inside edge of cabinet. Works on 3/4" of wood + material thickness. Countersunk mount holes, 20 gauge, 1/2" radius. Sold individually. See S-H102 for mounting hardware.
Please Log In to view prices
Corner - Black Steel, 2-Hole, 18 Gauge, Wraparound, Lip
2-leg black, wraparound with lip. 18 gauge steel, ½" radius. Sold individually.
Please Log In to view prices
Corner - Black Plastic, 4-Hole, Replacement for Vox / Orange
These Tube Amp Doctor black plastic corners are great replacements for Vox® and Orange® amps and cabinets that feature this type. The two larger holes are for use with screws while the small holes are intended for pins/nails just like the originals.
Please Log In to view prices
Corner - Steel, 3-Hole, 20 Gauge, for cabinets
11mm / 7/16" Radius, 20 Gauge Steel (Sold individually)
Please Log In to view prices
Corner - Peavey, Black Steel, 2-Hole, Lip
Black metal, 2 hole with lip, radius ½". Sold individually.
Please Log In to view prices
Corner - Black Plastic, 4-Hole, Heavy Duty, Chevron
Heavy duty plastic, stacking chevron corner. Ideal for carpet covered cabinets. See S-H102 for mounting hardware.
Please Log In to view prices
Corner - Marshall, Black Plastic, 4-Hole, Rear, with rivets
Package of 4
Marshall back corners with gold rivets. ¾" radius.
Please Log In to view prices
Corner - Steel, 3-Hole, 18 Gauge, for vinyl/carpeted cabinets
Industry standard 3-leg back side corner cover for vinyl or carpet covered cabinets. 18 gauge steel, 1/2" radius. Sold individually. See S-H101 for mounting hardware.
Please Log In to view prices
Corner - Marshall, Black Plastic, 3-Hole, with rivets
Package of 4
Front corner set, 3/4" radius. Includes gold rivets. Sold in package of 4
Please Log In to view prices
Corner - Black Steel, 3-Hole, 18 Gauge
3-leg black, standard. 18 gauge steel, ½" radius. Sold individually.
Please Log In to view prices
Corner - Marshall, Black Plastic, 3-Hole, Single Corner
Three hole genuine Marshall corners most often used on fronts of heads and cabinets. These corners are sold individually. Mounting rivets sold separately.
For sets of four with uncluded rivets, see P-H1091.
Please Log In to view prices
Corners - Fender, for amplifier, Nickel, 2-Hole with hardware
Package of 4
Pure Vintage 2-screw mount amplifier, package of 4, screws included.
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes eight mounting screws
  • Introduced on Blonde, Brown, and Blackface™-era amplifiers
  • Used on Cyber-Champ, Stage™ 100/160/112 SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112 Enclosure, Tone Master® enclosure, Vibro-King® 212 enclosure, '94 Twin, Acoustasonic™ Jr. DSP, Deluxe™ 90 DSP/900, Cyber-Twin®/Cyber-Twin SE, Concert, '65 Super Reverb®, Bullet® 15 DSP, Acoustasonic SFX II, Stage 1000/1600, '65 Twin Custom® 15, Steel King™, Princeton® Recording Amp and Super-Sonic™ series amplifiers
Please Log In to view prices
Corner - Marshall, Black Plastic, 3-Hole, Front Left / Right
Two black plastic, three hole, genuine Marshall® corners for slanted cabinets. Includes one left corner, one right corner and six gold mounting rivets.
Please Log In to view prices
Rivets - Marshall, Gold, for fastening
Gold rivets for fastening amplifier corners. For use on all Marshalls.
Please Log In to view prices
Corners - Fender, for amplifier, Steel, 3-Hole with hardware
Package of 4
Pure Vintage 3-screw mount amplifier corners
  • Set of four nickel-plated replacement amplifier corners for effective amplifier protection
  • Includes 12 mounting screws
  • Used on Cyber-Champ, Stage™ 100/112SE, Ultimate™ Chorus, Princeton® 65 DSP/650, GE-112, Tone Master™ enclosures, Vibro-King® 212, Deluxe™ 90 DSP/900, Acoustasonic™ SFX II, Stage™ 1000/1600, Super-Sonic™ enclosures, Bassman® enclosures, Acoustasonic Ultralight enclosures, Rumble™ enclosures, Band-Master® VM enclosures and Cyber-Twin® amplifiers
Please Log In to view prices
Screw - 1", Flat top Phillips, Stainless Steel
Package of 4
1" stainless steel Phillips head, flat top screw.
Please Log In to view prices
Rivets - Marshall, Silver, for fastening
Silver rivets for fastening amplifier corners. For use on all Marshalls.
Please Log In to view prices
Screw - #6 x ¾", Pan Head, Stainless Steel
Package of 12
Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
Please Log In to view prices
Screw - #6 x ¾", Flat Head, Stainless Steel
Package of 8
Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
Please Log In to view prices