Amplifier Parts

Fender® style lamp jewels are used on countless amps from all kinds of manufacturers. Threading: 9/16 - 27. Note: When back-lit, the color of the amp jewels will be affected by the color of the bulb behind it.

Lamp holder. Relampable front panel indicators accept a variety of T-2 and T-3 ¼ miniature bayonet lamps.

• 11/16" chassis hole
• Total Length = 1.755" (solder lugs included in measurement) (extends about 1.68" from front of panel to end of solder lugs)
• Rating: 125V, 75W
• Threading: 9/16 - 27

Available Jewels Amber P-L117 Blue P-L120 Clear P-L122 Green P-L116 Purple P-L121 Red P-L115 Violet P-L121V White P-L123

High quality Fender® Style fuse holder replacement for guitar amplifiers.

• Fits ½" chassis hole diameter
• Mounted by Nut

For 35/64" x 5/8" chassis hole, 11/32" cord diameter. Fits most Fender® amps.

• Protects the lifeline of your electric/ electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.
• Securely anchors, insulates, and protects cables at panel entry points

Generic amplifier chassis straps. Mounting hardware sold separately. Sold individually.

Heavy duty swivel caster for use on Fender and other amps. Each 2" diameter wheel supports 45.359Kg / 100Lb.

Replacement handle for Fender®, Peavey®, and other amps (8.25" from mounting center to mounter center). The rubber handle is steel reinforced with steel straight end caps. Mounting hardware sold separately.
See P-H261B for angular end caps.

Steel, 2-Hole corner. Replacement for Fender® Corner wraps around inside edge of cabinet. See S-H101 for mounting hardware.

• Works on ¾" of wood + material thickness
• 18 gauge steel
• 12mm / ½" radius
• For Fender®
• Sold individually.

Chrome glides in package of 4. Diameter: 15/16" Includes 7/8" wood screws

Replacement handle for tweed style Fender® amps (6.375" from mounting center to mounter center)

High quality replacement handle for vintage Fender amps. Will work on other amps as well. Mounts and screws not included (see P-H282A and S-H105). Center to center measurement is 6-½".

Retro fit for Fender, Molded dogbone style. 6" center to center. Replacement for Fender: 099-0946-000. For handle mounting hardware, see part number S-H105.

#6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.

For Fender and other cases. 4 1/2" center to center.

#6-32 x 1-¼” machine screws made of bronze plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For an 8-32 rosette head screw, see S-HRS8-1116.

Replacement handle for Fender® and other amps (8.27" from mounting center to mounting center). The rubber handle is steel reinforced with steel angular end caps. Mounting hardware sold separately.

18-8 stainless steel sheet metal screws with blunt tips. These pan head #8 screws have a length of 3/8” and are commonly used to secure the fiberboard, capacitor pan, and other hardware to the chassis of blackface and silverface amps. For the smaller #6 blunt tip machine screws found in vintage Fender® amps, see S-HBS6-516.

#8-32 x 1 1/16” machine screws made of brass plated steel. This style of rosette head screw is similar to the baffle mount screws found on many early Fender® tweed amplifiers. For a 6-32 rosette head screw, see S-HRS6-114.

18-8 stainless steel sheet metal screws with blunt tips. These pan head #6 screws have a length of 5/16” and are commonly used to secure 9-pin sockets and other hardware to the chassis of blackface and silverface amps. These are also used in some tweed amps for securing the fiberboard and other hardware to the chassis. For the larger #8 blunt tip machine screws found in vintage Fender® amps, see S-HBS8-38.

Imperial threaded hex nuts made of 18-8 stainless steel. Hex nuts like these can be found in countless pieces of equipment such as Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.

18-8 stainless steel sheet metal screws. These flat head #8 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for RCA reverb tank cables used in vintage Fender® blackface and silverface combo amps. For the larger #10 screws often used with power cables, see S-HFS10-34.

18-8 stainless steel sheet metal screws. These flat head #10 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for AC power cables used in vintage Fender® blackface and silverface combo amps. For the smaller #8 screws often used with reverb cables, see S-HFS8-34.

#8 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® blackface and silverface speaker cabinets to secure the back panel. They are also used to attach baffle boards on amps from this era. They are also the same type used for securing strap buttons as well as for mounting necks on Telecaster®, Stratocaster®, and other Fender® guitars.

#3 x ⅜” Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Gibson® pickguards, truss rod covers, and some humbucker rings.