Requires:

• 2 × 12AX7

Large clay-filled plastic container (1 5/8" high x 2" diameter) helps prevent drying out and cracking of guitars, violins, cellos, and other wooden instruments. The Herco Guardfather is a simple-to-use humidifier system for use in instrument cases to keep a constant level of humidity preventing cracks and other issues related to dried out wood.

It is essential to maintain a proper moisture level in your guitar. Grover's new guitar case humidifier helps to prevent adverse effects such as bad string action, buzzing, protruding fret ends, cracking, top-sinking, and other damage caused as a result of dryness. Made of soft latex which is harmless to all instrument finishes, these humidifiers maintain proper humidity levels. Includes a cover to seal the sound hole during use. Easy to follow instructions and a user-friendly humidity gauge are included.

Polyester film dielectric, aluminum foil electrode, copperply leads and epoxy resin coating in inductive type.

• Small size, light weight and low cost
• Dissipation factor is small because the leads are directly welded to electrodes
• Epoxy resin vacuum-dipped enhances the mechanical strength, humidity resistance
• 100 volt rating
• Operating temperature range: -40°C to +85°C.
• Package of 5

High quality PCB mount 3PDT footswitch from Alpha. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.

• Bushing Length: 11.5mm
• Threading: M12 x 0.75
• PCB mount pins

High quality 25 Series resistors from Ohmite. These 5W wirewound resistors are a great choice for screen grid and cathode bias resistors in tube amplifiers. The brown enamel coating used by Ohmite looks great in vintage and vintage-style amps. The 25 Series axial terminal resistors are both durable and economical.

High quality Alpha 3PDT footswitch with solder lugs. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.

• Bushing Length: 11.5mm
• Threading: M12 x 0.75
• Solder Lugs

VTL5C1 vactrols for use in amplifiers, effect pedals, synthesizers and more. The VTL5C1 was commonly used for channel switching circuits in amps made by Crate and others.

High quality 23 Series resistors from Ohmite. These 470Ω 3W wirewound resistors are a great choice for screen grid and cathode bias resistors in tube amplifiers. The brown enamel coating used by Ohmite looks great in vintage and vintage-style amps.
The 23 Series axial terminal resistors are both durable and economical.

Prototyping circuit board with a standard long strip pattern where tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads and the board has 0.1" hole spacing for DIP integrated circuits/ headers as well as other parts. Higher quality than traditional stripboard, the holes are drilled, not punched.

High quality Alpha 3PDT footswitch with solder lugs and a long bushing. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.

• Bushing Length: 15.25mm
• Threading: M12 x 0.75
• Solder Lugs

ST3U StripBoard is a prototyping circuit board with a standard long strip pattern. Tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads. It has 0.1" hole spacing for DIP integrated circuits and headers and other parts. It has higher quality than traditional stripboard. The holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board. It has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity. Features

• Standard stripboard pattern, with tracks running the length of the board.
• Single-sided high-quality FR4 glass-epoxy circuit board.
• 1oz/ft2 copper with an anti-tarnish coating for easy soldering.

Polyester Film Capacitor used in MOD® Pedal Kits. Rated at 0.047µF 50V. Tolerance: 10%. Operating temperature: -40 C to +85 C

ST2 StripBoard is a prototyping circuit board with a standard long strip pattern. Tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads. It has 0.1" hole spacing for DIP integrated circuits and headers and other parts. ST2 has higher quality than traditional stripboard. The holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board. It has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity. Features

• Standard stripboard pattern, with tracks running the length of the board.
• Single-sided high-quality FR4 glass-epoxy circuit board.
• 1oz/ft2 copper with an anti-tarnish coating for easy soldering.

The Atten ST-862D high power hot air station. The ST-862D hot air station offers powerful heating with plenty of airflow in an affordable package with no compromises. Professionals have done detailed comparisons with machines more than three times the price and have found that the ST-862D performs just as well or better. The ST-862D is a great choice for beginners looking to learn SMD soldering and is also a great choice for those looking to upgrade their current setup.

Krylon 9090 high strength spray adhesive. This fast-acting adhesive has a variable volume controlled web spray pattern that offers high contact strength.

• Superior, permanent bond
• High contact strength
• Bonds heavy-duty materials like wood, metal, plastic, glass, laminate and more
• Dries in 30 minutes

For use on: Wood, Metal, Plastic, Glass, Paper, Papier-mâché, Plaster, Ceramic Application conditions: Best results when temperatures are 55° F to 75°F and humidity is below 60%. Applying outside this range may impact finish Indoor/outdoor: Interior/Exterior

Protects and lubricates electronic connections. Ideal for severe environments; humidity, salts, pllutants, sulfer, etc. Safe on plastics.

• Cleaner Audio
• Clearer Video
• Reliable Data